M keyboards/keychron/q2/chconf.h => keyboards/keychron/q2/chconf.h +1 -6
@@ 14,11 14,6 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-/*
- * This file was auto-generated by:
- * `qmk chibios-confmigrate -i keyboards/acheron/arctic/chconf.h -r platforms/chibios/common/configs/chconf.h`
- */
-
#pragma once
#define CH_CFG_ST_FREQUENCY 10000
@@ 27,4 22,4 @@
#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
-#include_next <chconf.h>>
\ No newline at end of file
+#include_next <chconf.h>
M keyboards/keychron/q2/config.h => keyboards/keychron/q2/config.h +65 -0
@@ 38,6 38,14 @@
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
+/* RGB Matrix Driver Configuration */
+#define DRIVER_COUNT 2
+#define DRIVER_ADDR_1 0b1110111
+#define DRIVER_ADDR_2 0b1110100
+
+/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */
+#define PHASE_CHANNEL MSKPHASE_9CHANNEL
+
/* Disable DIP switch in matrix data */
#define MATRIX_MASKED
@@ 50,5 58,62 @@
/* Use 5 dynamic keymap layers */
#define DYNAMIC_KEYMAP_LAYER_COUNT 5
+/* We have 2KB EEPROM size on STM32L432 */
+#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 2047
+
/* EEPROM Driver Configuration */
#define EXTERNAL_EEPROM_I2C_BASE_ADDRESS 0b10100010
+
+// RGB Matrix Animation modes. Explicitly enabled
+// For full list of effects, see:
+// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
+// #define ENABLE_RGB_MATRIX_ALPHAS_MODS
+// #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+// #define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#define ENABLE_RGB_MATRIX_BREATHING
+// #define ENABLE_RGB_MATRIX_BAND_SAT
+// #define ENABLE_RGB_MATRIX_BAND_VAL
+// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#define ENABLE_RGB_MATRIX_CYCLE_ALL
+#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#define ENABLE_RGB_MATRIX_DUAL_BEACON
+#define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+// #define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#define ENABLE_RGB_MATRIX_RAINDROPS
+// #define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+// #define ENABLE_RGB_MATRIX_HUE_BREATHING
+// #define ENABLE_RGB_MATRIX_HUE_PENDULUM
+// #define ENABLE_RGB_MATRIX_HUE_WAVE
+// #define ENABLE_RGB_MATRIX_PIXEL_RAIN
+// #define ENABLE_RGB_MATRIX_PIXEL_FLOW
+// #define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
+#define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+#define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#define ENABLE_RGB_MATRIX_SPLASH
+#define ENABLE_RGB_MATRIX_MULTISPLASH
+#define ENABLE_RGB_MATRIX_SOLID_SPLASH
+#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
+/* Allow VIA to edit lighting */
+#ifdef VIA_ENABLE
+# define VIA_QMK_RGBLIGHT_ENABLE
+#endif
M keyboards/keychron/q2/halconf.h => keyboards/keychron/q2/halconf.h +1 -6
@@ 14,13 14,8 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-/*
- * This file was auto-generated by:
- * `qmk chibios-confmigrate -i keyboards/nk65/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h`
- */
-
#pragma once
#define HAL_USE_I2C TRUE
-#include_next <halconf.h>>
\ No newline at end of file
+#include_next <halconf.h>
M keyboards/keychron/q2/mcuconf.h => keyboards/keychron/q2/mcuconf.h +1 -6
@@ 14,14 14,9 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-/*
- * This file was auto-generated by:
- * `qmk chibios-confmigrate -i keyboards/acheron/arctic/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h`
- */
-
#pragma once
#include_next <mcuconf.h>
#undef STM32_I2C_USE_I2C1
-#define STM32_I2C_USE_I2C1 TRUE>
\ No newline at end of file
+#define STM32_I2C_USE_I2C1 TRUE
M keyboards/keychron/q2/rev_0110/config.h => keyboards/keychron/q2/rev_0110/config.h +5 -0
@@ 19,3 19,8 @@
/* USB Device descriptor parameter */
#define PRODUCT_ID 0x0110
#define DEVICE_VER 0x0100
+
+/* RGB Matrix Configuration */
+#define DRIVER_1_LED_TOTAL 34
+#define DRIVER_2_LED_TOTAL 33
+#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
M keyboards/keychron/q2/rev_0110/rev_0110.c => keyboards/keychron/q2/rev_0110/rev_0110.c +106 -0
@@ 15,3 15,109 @@
*/
#include "quantum.h"
+
+#ifdef RGB_MATRIX_ENABLE
+const ckled2001_led PROGMEM g_ckled2001_leds[DRIVER_LED_TOTAL] = {
+/* Refer to CKLED manual for these locations
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, C_1, A_1, B_1},
+ {0, C_2, A_2, B_2},
+ {0, C_3, A_3, B_3},
+ {0, C_4, A_4, B_4},
+ {0, C_5, A_5, B_5},
+ {0, C_6, A_6, B_6},
+ {0, C_7, A_7, B_7},
+ {0, C_8, A_8, B_8},
+ {0, C_9, A_9, B_9},
+ {0, C_10, A_10, B_10},
+ {0, C_11, A_11, B_11},
+ {0, C_12, A_12, B_12},
+ {0, C_13, A_13, B_13},
+ {0, C_14, A_14, B_14},
+ {0, C_16, A_16, B_16},
+
+ {0, F_1, D_1, E_1},
+ {0, F_2, D_2, E_2},
+ {0, F_3, D_3, E_3},
+ {0, F_4, D_4, E_4},
+ {0, F_5, D_5, E_5},
+ {0, F_6, D_6, E_6},
+ {0, F_7, D_7, E_7},
+ {0, F_8, D_8, E_8},
+ {0, F_9, D_9, E_9},
+ {0, F_10, D_10, E_10},
+ {0, F_11, D_11, E_11},
+ {0, F_12, D_12, E_12},
+ {0, F_13, D_13, E_13},
+ {0, F_14, D_14, E_14},
+ {0, F_16, D_16, E_16},
+
+ {0, I_1, G_1, H_1},
+ {0, I_2, G_2, H_2},
+ {0, I_3, G_3, H_3},
+ {0, I_4, G_4, H_4},
+ {1, I_5, G_5, H_5},
+ {1, I_6, G_6, H_6},
+ {1, I_7, G_7, H_7},
+ {1, I_8, G_8, H_8},
+ {1, I_9, G_9, H_9},
+ {1, I_10, G_10, H_10},
+ {1, I_11, G_11, H_11},
+ {1, I_12, G_12, H_12},
+ {1, I_14, G_14, H_14},
+ {1, I_16, G_16, H_16},
+
+ {1, C_1, A_1, B_1},
+ {1, C_3, A_3, B_3},
+ {1, C_4, A_4, B_4},
+ {1, C_5, A_5, B_5},
+ {1, C_6, A_6, B_6},
+ {1, C_7, A_7, B_7},
+ {1, C_8, A_8, B_8},
+ {1, C_9, A_9, B_9},
+ {1, C_10, A_10, B_10},
+ {1, C_11, A_11, B_11},
+ {1, C_12, A_12, B_12},
+ {1, C_14, A_14, B_14},
+ {1, C_15, A_15, B_15},
+
+ {1, F_1, D_1, E_1},
+ {1, F_2, D_2, E_2},
+ {1, F_3, D_3, E_3},
+ {1, F_7, D_7, E_7},
+ {1, F_11, D_11, E_11},
+ {1, F_12, D_12, E_12},
+ {1, F_13, D_13, E_13},
+ {1, F_14, D_14, E_14},
+ {1, F_15, D_15, E_15},
+ {1, F_16, D_16, E_16},
+};
+
+led_config_t g_led_config = {
+ {
+ { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 },
+ { 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29 },
+ { 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 65, 42, 43 },
+ { 44, NO_LED, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, NO_LED, 55, 56 },
+ { 57, 58, 59, NO_LED, NO_LED, NO_LED, 60, NO_LED, NO_LED, NO_LED, 61, 62, 63, 64, 66 },
+ },
+ {
+ {0, 0}, {15, 0}, {30, 0}, {45, 0}, {60, 0}, {75, 0}, {90, 0}, {105, 0}, {120, 0}, {135, 0}, {150, 0}, {165, 0}, {180, 0}, {195, 0}, {224, 0},
+ {0,16}, {15,16}, {30,16}, {45,16}, {60,16}, {75,16}, {90,16}, {105,16}, {120,16}, {135,16}, {150,16}, {165,16}, {180,16}, {195,16}, {224,16},
+ {0,32}, {15,32}, {30,32}, {45,32}, {60,32}, {75,32}, {90,32}, {105,32}, {120,32}, {135,32}, {150,32}, {165,32}, {195,32}, {224,32},
+ {0,48}, {30,48}, {45,48}, {60,48}, {75,48}, {90,48}, {105,48}, {120,48}, {135,48}, {150,48}, {165,48}, {180,48}, {210,48},
+ {0,64}, {15,64}, {30,64}, {90,64}, {150,64}, {165,64}, {180,64}, {195,64}, {210,64}, {224,64},
+ },
+ {
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ }
+};
+#endif
M keyboards/keychron/q2/rev_0110/rules.mk => keyboards/keychron/q2/rev_0110/rules.mk +3 -14
@@ 1,13 1,5 @@
# MCU name
-# MCU = STM32L432
-MCU = cortex-m4
-ARMV = 7
-MCU_FAMILY = STM32
-MCU_SERIES = STM32L4xx
-MCU_LDSCRIPT = STM32L432xB
-MCU_STARTUP = stm32l4xx
-BOARD = GENERIC_STM32_L433XC
-PLATFORM_NAME = platform_l432
+MCU = STM32L433
# Build Options
# change yes to no to disable
@@ 23,12 15,9 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
ENCODER_ENABLE = no # Enable Encoder
DIP_SWITCH_ENABLE = yes
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = CKLED2001
EEPROM_DRIVER = i2c
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
-
-# custom matrix setup
-CUSTOM_MATRIX = lite
-
-SRC += matrix.c
M keyboards/keychron/q2/rev_0111/config.h => keyboards/keychron/q2/rev_0111/config.h +6 -1
@@ 20,9 20,14 @@
#define PRODUCT_ID 0x0111
#define DEVICE_VER 0x0100
+/* RGB Matrix Configuration */
+#define DRIVER_1_LED_TOTAL 34
+#define DRIVER_2_LED_TOTAL 33
+#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+
/* Encoder used pins */
#define ENCODERS_PAD_A { A10 }
#define ENCODERS_PAD_B { B5 }
/* Specifies the number of pulses the encoder registers between each detent */
-#define ENCODER_RESOLUTION 2
+#define ENCODER_RESOLUTION 4
M keyboards/keychron/q2/rev_0111/rev_0111.c => keyboards/keychron/q2/rev_0111/rev_0111.c +106 -0
@@ 16,6 16,112 @@
#include "quantum.h"
+#ifdef RGB_MATRIX_ENABLE
+const ckled2001_led PROGMEM g_ckled2001_leds[DRIVER_LED_TOTAL] = {
+/* Refer to CKLED manual for these locations
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, C_1, A_1, B_1},
+ {0, C_2, A_2, B_2},
+ {0, C_3, A_3, B_3},
+ {0, C_4, A_4, B_4},
+ {0, C_5, A_5, B_5},
+ {0, C_6, A_6, B_6},
+ {0, C_7, A_7, B_7},
+ {0, C_8, A_8, B_8},
+ {0, C_9, A_9, B_9},
+ {0, C_10, A_10, B_10},
+ {0, C_11, A_11, B_11},
+ {0, C_12, A_12, B_12},
+ {0, C_13, A_13, B_13},
+ {0, C_14, A_14, B_14},
+ {0, C_16, A_16, B_16},
+
+ {0, F_1, D_1, E_1},
+ {0, F_2, D_2, E_2},
+ {0, F_3, D_3, E_3},
+ {0, F_4, D_4, E_4},
+ {0, F_5, D_5, E_5},
+ {0, F_6, D_6, E_6},
+ {0, F_7, D_7, E_7},
+ {0, F_8, D_8, E_8},
+ {0, F_9, D_9, E_9},
+ {0, F_10, D_10, E_10},
+ {0, F_11, D_11, E_11},
+ {0, F_12, D_12, E_12},
+ {0, F_13, D_13, E_13},
+ {0, F_14, D_14, E_14},
+ {0, F_16, D_16, E_16},
+
+ {0, I_1, G_1, H_1},
+ {0, I_2, G_2, H_2},
+ {0, I_3, G_3, H_3},
+ {0, I_4, G_4, H_4},
+ {1, I_5, G_5, H_5},
+ {1, I_6, G_6, H_6},
+ {1, I_7, G_7, H_7},
+ {1, I_8, G_8, H_8},
+ {1, I_9, G_9, H_9},
+ {1, I_10, G_10, H_10},
+ {1, I_11, G_11, H_11},
+ {1, I_12, G_12, H_12},
+ {1, I_14, G_14, H_14},
+ {1, I_16, G_16, H_16},
+
+ {1, C_1, A_1, B_1},
+ {1, C_3, A_3, B_3},
+ {1, C_4, A_4, B_4},
+ {1, C_5, A_5, B_5},
+ {1, C_6, A_6, B_6},
+ {1, C_7, A_7, B_7},
+ {1, C_8, A_8, B_8},
+ {1, C_9, A_9, B_9},
+ {1, C_10, A_10, B_10},
+ {1, C_11, A_11, B_11},
+ {1, C_12, A_12, B_12},
+ {1, C_14, A_14, B_14},
+ {1, C_15, A_15, B_15},
+
+ {1, F_1, D_1, E_1},
+ {1, F_2, D_2, E_2},
+ {1, F_3, D_3, E_3},
+ {1, F_7, D_7, E_7},
+ {1, F_11, D_11, E_11},
+ {1, F_12, D_12, E_12},
+ {1, F_13, D_13, E_13},
+ {1, F_14, D_14, E_14},
+ {1, F_15, D_15, E_15},
+ {1, F_16, D_16, E_16},
+};
+
+led_config_t g_led_config = {
+ {
+ { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 },
+ { 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29 },
+ { 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 65, 42, 43 },
+ { 44, NO_LED, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, NO_LED, 55, 56 },
+ { 57, 58, 59, NO_LED, NO_LED, NO_LED, 60, NO_LED, NO_LED, NO_LED, 61, 62, 63, 64, 66 },
+ },
+ {
+ {0, 0}, {15, 0}, {30, 0}, {45, 0}, {60, 0}, {75, 0}, {90, 0}, {105, 0}, {120, 0}, {135, 0}, {150, 0}, {165, 0}, {180, 0}, {195, 0}, {224, 0},
+ {0,16}, {15,16}, {30,16}, {45,16}, {60,16}, {75,16}, {90,16}, {105,16}, {120,16}, {135,16}, {150,16}, {165,16}, {180,16}, {195,16}, {224,16},
+ {0,32}, {15,32}, {30,32}, {45,32}, {60,32}, {75,32}, {90,32}, {105,32}, {120,32}, {135,32}, {150,32}, {165,32}, {195,32}, {224,32},
+ {0,48}, {30,48}, {45,48}, {60,48}, {75,48}, {90,48}, {105,48}, {120,48}, {135,48}, {150,48}, {165,48}, {180,48}, {210,48},
+ {0,64}, {15,64}, {30,64}, {90,64}, {150,64}, {165,64}, {180,64}, {195,64}, {210,64}, {224,64},
+ },
+ {
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ }
+};
+#endif
+
#ifdef ENCODER_ENABLE
bool encoder_update_kb(uint8_t index, bool clockwise) {
if (!encoder_update_user(index, clockwise)) { return false; }
M keyboards/keychron/q2/rev_0111/rules.mk => keyboards/keychron/q2/rev_0111/rules.mk +3 -14
@@ 1,13 1,5 @@
# MCU name
-# MCU = STM32L432
-MCU = cortex-m4
-ARMV = 7
-MCU_FAMILY = STM32
-MCU_SERIES = STM32L4xx
-MCU_LDSCRIPT = STM32L432xB
-MCU_STARTUP = stm32l4xx
-BOARD = GENERIC_STM32_L433XC
-PLATFORM_NAME = platform_l432
+MCU = STM32L433
# Build Options
# change yes to no to disable
@@ 23,12 15,9 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
ENCODER_ENABLE = yes # Enable Encoder
DIP_SWITCH_ENABLE = yes
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = CKLED2001
EEPROM_DRIVER = i2c
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
-
-# custom matrix setup
-CUSTOM_MATRIX = lite
-
-SRC += matrix.c
M keyboards/keychron/q2/rev_0112/config.h => keyboards/keychron/q2/rev_0112/config.h +5 -0
@@ 19,3 19,8 @@
/* USB Device descriptor parameter */
#define PRODUCT_ID 0x0112
#define DEVICE_VER 0x0100
+
+/* RGB Matrix Configuration */
+#define DRIVER_1_LED_TOTAL 34
+#define DRIVER_2_LED_TOTAL 34
+#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
M keyboards/keychron/q2/rev_0112/rev_0112.c => keyboards/keychron/q2/rev_0112/rev_0112.c +107 -0
@@ 15,3 15,110 @@
*/
#include "quantum.h"
+
+#ifdef RGB_MATRIX_ENABLE
+const ckled2001_led PROGMEM g_ckled2001_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, C_1, A_1, B_1},
+ {0, C_2, A_2, B_2},
+ {0, C_3, A_3, B_3},
+ {0, C_4, A_4, B_4},
+ {0, C_5, A_5, B_5},
+ {0, C_6, A_6, B_6},
+ {0, C_7, A_7, B_7},
+ {0, C_8, A_8, B_8},
+ {0, C_9, A_9, B_9},
+ {0, C_10, A_10, B_10},
+ {0, C_11, A_11, B_11},
+ {0, C_12, A_12, B_12},
+ {0, C_13, A_13, B_13},
+ {0, C_14, A_14, B_14},
+ {0, C_16, A_16, B_16},
+
+ {0, F_1, D_1, E_1},
+ {0, F_2, D_2, E_2},
+ {0, F_3, D_3, E_3},
+ {0, F_4, D_4, E_4},
+ {0, F_5, D_5, E_5},
+ {0, F_6, D_6, E_6},
+ {0, F_7, D_7, E_7},
+ {0, F_8, D_8, E_8},
+ {0, F_9, D_9, E_9},
+ {0, F_10, D_10, E_10},
+ {0, F_11, D_11, E_11},
+ {0, F_12, D_12, E_12},
+ {0, F_13, D_13, E_13},
+ {0, F_16, D_16, E_16},
+
+ {0, I_1, G_1, H_1},
+ {0, I_2, G_2, H_2},
+ {0, I_3, G_3, H_3},
+ {0, I_4, G_4, H_4},
+ {1, I_5, G_5, H_5},
+ {1, I_6, G_6, H_6},
+ {1, I_7, G_7, H_7},
+ {1, I_8, G_8, H_8},
+ {1, I_9, G_9, H_9},
+ {1, I_10, G_10, H_10},
+ {1, I_11, G_11, H_11},
+ {1, I_12, G_12, H_12},
+ {1, I_14, G_14, H_14},
+ {0, F_14, D_14, E_14},
+ {1, I_16, G_16, H_16},
+
+ {1, C_1, A_1, B_1},
+ {1, C_2, A_2, B_2},
+ {1, C_3, A_3, B_3},
+ {1, C_4, A_4, B_4},
+ {1, C_5, A_5, B_5},
+ {1, C_6, A_6, B_6},
+ {1, C_7, A_7, B_7},
+ {1, C_8, A_8, B_8},
+ {1, C_9, A_9, B_9},
+ {1, C_10, A_10, B_10},
+ {1, C_11, A_11, B_11},
+ {1, C_12, A_12, B_12},
+ {1, C_14, A_14, B_14},
+ {1, C_15, A_15, B_15},
+
+ {1, F_1, D_1, E_1},
+ {1, F_2, D_2, E_2},
+ {1, F_3, D_3, E_3},
+ {1, F_7, D_7, E_7},
+ {1, F_11, D_11, E_11},
+ {1, F_12, D_12, E_12},
+ {1, F_13, D_13, E_13},
+ {1, F_14, D_14, E_14},
+ {1, F_15, D_15, E_15},
+ {1, F_16, D_16, E_16}
+};
+
+led_config_t g_led_config = {
+ {
+ { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 },
+ { 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 42, 28 },
+ { 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 66, 41, 43 },
+ { 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, NO_LED, 56, 57 },
+ { 58, 59, 60, NO_LED, NO_LED, NO_LED, 61, NO_LED, NO_LED, NO_LED, 62, 63, 64, 65, 67 }
+ },
+ {
+ {0, 0}, {15, 0}, {30, 0}, {45, 0}, {60, 0}, {75, 0}, {90, 0}, {105, 0}, {120, 0}, {135, 0}, {150, 0}, {165, 0}, {180, 0}, {195, 0}, {224, 0},
+ {0,16}, {15,16}, {30,16}, {45,16}, {60,16}, {75,16}, {90,16}, {105,16}, {120,16}, {135,16}, {150,16}, {165,16}, {180,16}, {224,16},
+ {0,32}, {15,32}, {30,32}, {45,32}, {60,32}, {75,32}, {90,32}, {105,32}, {120,32}, {135,32}, {150,32}, {165,32}, {180,32}, {195,16}, {224,32},
+ {0,48}, {15,48}, {30,48}, {45,48}, {60,48}, {75,48}, {90,48}, {105,48}, {120,48}, {135,48}, {150,48}, {165,48}, {180,48}, {210,48},
+ {0,64}, {15,64}, {30,64}, {90,64}, {150,64}, {165,64}, {180,64}, {195,64}, {210,64}, {224,64}
+ },
+ {
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4
+ }
+};
+#endif
M keyboards/keychron/q2/rev_0112/rules.mk => keyboards/keychron/q2/rev_0112/rules.mk +3 -14
@@ 1,13 1,5 @@
# MCU name
-# MCU = STM32L432
-MCU = cortex-m4
-ARMV = 7
-MCU_FAMILY = STM32
-MCU_SERIES = STM32L4xx
-MCU_LDSCRIPT = STM32L432xB
-MCU_STARTUP = stm32l4xx
-BOARD = GENERIC_STM32_L433XC
-PLATFORM_NAME = platform_l432
+MCU = STM32L433
# Build Options
# change yes to no to disable
@@ 23,12 15,9 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
ENCODER_ENABLE = no # Enable Encoder
DIP_SWITCH_ENABLE = yes
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = CKLED2001
EEPROM_DRIVER = i2c
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
-
-# custom matrix setup
-CUSTOM_MATRIX = lite
-
-SRC += matrix.c
M keyboards/keychron/q2/rev_0113/config.h => keyboards/keychron/q2/rev_0113/config.h +5 -0
@@ 20,6 20,11 @@
#define PRODUCT_ID 0x0113
#define DEVICE_VER 0x0100
+/* RGB Matrix Configuration */
+#define DRIVER_1_LED_TOTAL 34
+#define DRIVER_2_LED_TOTAL 34
+#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+
/* Encoder used pins */
#define ENCODERS_PAD_A { A10 }
#define ENCODERS_PAD_B { B5 }
M keyboards/keychron/q2/rev_0113/rev_0113.c => keyboards/keychron/q2/rev_0113/rev_0113.c +107 -0
@@ 16,6 16,113 @@
#include "quantum.h"
+#ifdef RGB_MATRIX_ENABLE
+const ckled2001_led PROGMEM g_ckled2001_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, C_1, A_1, B_1},
+ {0, C_2, A_2, B_2},
+ {0, C_3, A_3, B_3},
+ {0, C_4, A_4, B_4},
+ {0, C_5, A_5, B_5},
+ {0, C_6, A_6, B_6},
+ {0, C_7, A_7, B_7},
+ {0, C_8, A_8, B_8},
+ {0, C_9, A_9, B_9},
+ {0, C_10, A_10, B_10},
+ {0, C_11, A_11, B_11},
+ {0, C_12, A_12, B_12},
+ {0, C_13, A_13, B_13},
+ {0, C_14, A_14, B_14},
+ {0, C_16, A_16, B_16},
+
+ {0, F_1, D_1, E_1},
+ {0, F_2, D_2, E_2},
+ {0, F_3, D_3, E_3},
+ {0, F_4, D_4, E_4},
+ {0, F_5, D_5, E_5},
+ {0, F_6, D_6, E_6},
+ {0, F_7, D_7, E_7},
+ {0, F_8, D_8, E_8},
+ {0, F_9, D_9, E_9},
+ {0, F_10, D_10, E_10},
+ {0, F_11, D_11, E_11},
+ {0, F_12, D_12, E_12},
+ {0, F_13, D_13, E_13},
+ {0, F_16, D_16, E_16},
+
+ {0, I_1, G_1, H_1},
+ {0, I_2, G_2, H_2},
+ {0, I_3, G_3, H_3},
+ {0, I_4, G_4, H_4},
+ {1, I_5, G_5, H_5},
+ {1, I_6, G_6, H_6},
+ {1, I_7, G_7, H_7},
+ {1, I_8, G_8, H_8},
+ {1, I_9, G_9, H_9},
+ {1, I_10, G_10, H_10},
+ {1, I_11, G_11, H_11},
+ {1, I_12, G_12, H_12},
+ {1, I_14, G_14, H_14},
+ {0, F_14, D_14, E_14},
+ {1, I_16, G_16, H_16},
+
+ {1, C_1, A_1, B_1},
+ {1, C_2, A_2, B_2},
+ {1, C_3, A_3, B_3},
+ {1, C_4, A_4, B_4},
+ {1, C_5, A_5, B_5},
+ {1, C_6, A_6, B_6},
+ {1, C_7, A_7, B_7},
+ {1, C_8, A_8, B_8},
+ {1, C_9, A_9, B_9},
+ {1, C_10, A_10, B_10},
+ {1, C_11, A_11, B_11},
+ {1, C_12, A_12, B_12},
+ {1, C_14, A_14, B_14},
+ {1, C_15, A_15, B_15},
+
+ {1, F_1, D_1, E_1},
+ {1, F_2, D_2, E_2},
+ {1, F_3, D_3, E_3},
+ {1, F_7, D_7, E_7},
+ {1, F_11, D_11, E_11},
+ {1, F_12, D_12, E_12},
+ {1, F_13, D_13, E_13},
+ {1, F_14, D_14, E_14},
+ {1, F_15, D_15, E_15},
+ {1, F_16, D_16, E_16}
+};
+
+led_config_t g_led_config = {
+ {
+ { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 },
+ { 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 42, 28 },
+ { 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 66, 41, 43 },
+ { 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, NO_LED, 56, 57 },
+ { 58, 59, 60, NO_LED, NO_LED, NO_LED, 61, NO_LED, NO_LED, NO_LED, 62, 63, 64, 65, 67 }
+ },
+ {
+ {0, 0}, {15, 0}, {30, 0}, {45, 0}, {60, 0}, {75, 0}, {90, 0}, {105, 0}, {120, 0}, {135, 0}, {150, 0}, {165, 0}, {180, 0}, {195, 0}, {224, 0},
+ {0,16}, {15,16}, {30,16}, {45,16}, {60,16}, {75,16}, {90,16}, {105,16}, {120,16}, {135,16}, {150,16}, {165,16}, {180,16}, {224,16},
+ {0,32}, {15,32}, {30,32}, {45,32}, {60,32}, {75,32}, {90,32}, {105,32}, {120,32}, {135,32}, {150,32}, {165,32}, {180,32}, {195,16}, {224,32},
+ {0,48}, {15,48}, {30,48}, {45,48}, {60,48}, {75,48}, {90,48}, {105,48}, {120,48}, {135,48}, {150,48}, {165,48}, {180,48}, {210,48},
+ {0,64}, {15,64}, {30,64}, {90,64}, {150,64}, {165,64}, {180,64}, {195,64}, {210,64}, {224,64}
+ },
+ {
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4
+ }
+};
+#endif
+
#ifdef ENCODER_ENABLE
bool encoder_update_kb(uint8_t index, bool clockwise) {
if (!encoder_update_user(index, clockwise)) { return false; }
M keyboards/keychron/q2/rev_0113/rules.mk => keyboards/keychron/q2/rev_0113/rules.mk +3 -14
@@ 1,13 1,5 @@
# MCU name
-# MCU = STM32L432
-MCU = cortex-m4
-ARMV = 7
-MCU_FAMILY = STM32
-MCU_SERIES = STM32L4xx
-MCU_LDSCRIPT = STM32L432xB
-MCU_STARTUP = stm32l4xx
-BOARD = GENERIC_STM32_L433XC
-PLATFORM_NAME = platform_l432
+MCU = STM32L433
# Build Options
# change yes to no to disable
@@ 23,12 15,9 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
ENCODER_ENABLE = yes # Enable Encoder
DIP_SWITCH_ENABLE = yes
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = CKLED2001
EEPROM_DRIVER = i2c
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
-
-# custom matrix setup
-CUSTOM_MATRIX = lite
-
-SRC += matrix.c