4 files changed, 53 insertions(+), 12 deletions(-)

M converter/sun_usb/Makefile
M converter/sun_usb/README
M converter/sun_usb/command_extra.c
M converter/sun_usb/matrix.c

@@ 63,6 63,7 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control
 CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
 #NKRO_ENABLE = yes	# USB Nkey Rollover
 
 

@@ 77,3 77,23 @@ Just use 'make'
     $ cd sun_usb
     $ make
 Then, load the binary to MCU with your favorite programmer.
+
+
+Sun commands
+------------
+You can send Sun protocol commands with TMK `Magic` key combo. By default `Magic` key is `LShift` + `RShift`, `LAlt` + `RAlt' or `LMeta` + `RMeta`.
+https://github.com/tmk/tmk_keyboard#magic-commands
+
+Following Sun specific commands are available. For example, to send 'Bell On' you can press `LShift` + `RShift` + `Up` keys simultaneously.
+
+```
+----- Sun converter Help -----
+Up:     Bell On
+Down:   Bell Off
+Left:   Click On
+Right:  Click Off
+PgUp:   LED all On
+PgDown: LED all On
+Insert: Layout
+Delete: Reset
+```

@@ 11,11 11,19 @@ bool command_extra(uint8_t code)
         case KC_H:
         case KC_SLASH: /* ? */
             print("\n\n----- Sun converter Help -----\n");
-            print("UP:	Bell On\n");
-            print("DOWN:	Bell Off\n");
-            print("LEFT:	Click On\n");
-            print("RIGHT:	Click Off\n");
+            print("Up:	Bell On\n");
+            print("Down:	Bell Off\n");
+            print("Left:	Click On\n");
+            print("Right:	Click Off\n");
+            print("PgUp:	LED all On\n");
+            print("PgDown:	LED all On\n");
+            print("Insert:	Layout\n");
+            print("Delete:	Reset\n");
             return false;
+        case KC_DEL:
+            print("Reset\n");
+            serial_send(0x01);
+            break;
         case KC_UP:
             print("Bell On\n");
             serial_send(0x02);


@@ 32,7 40,17 @@ bool command_extra(uint8_t code)
             print("Click Off\n");
             serial_send(0x0B);
             break;
-        case KC_NUMLOCK:
+        case KC_PGUP:
+            print("LED all on\n");
+            serial_send(0x0E);
+            serial_send(0xFF);
+            break;
+        case KC_PGDOWN:
+            print("LED all off\n");
+            serial_send(0x0E);
+            serial_send(0x00);
+            break;
+        case KC_INSERT:
             print("layout\n");
             serial_send(0x0F);
             break;

@@ 65,7 65,7 @@ void matrix_init(void)
 {
     DDRD |= (1<<6);
     PORTD |= (1<<6);
-    debug_enable = true;
+    //debug_enable = true;
 
     serial_init();
 


@@ 86,14 86,16 @@ uint8_t matrix_scan(void)
     debug_hex(code); debug(" ");
 
     switch (code) {
-        case 0x7E:  // reset fail
-        case 0xFE:  // layout
         case 0xFF:  // reset success
+        case 0xFE:  // layout
+        case 0x7E:  // reset fail
+            if (code == 0xFF) print("reset: 0xFF ");
+            if (code == 0x7E) print("reset fail: 0x7E ");
+            if (code == 0xFE) print("layout: 0xFE ");
+            // response byte
             _delay_ms(500);
-            // ignore response byte
-            debug("(response ignored:");
-            while ((code = serial_recv())) { debug(" "); debug_hex(code); }
-            debug(") ");
+            if (code = serial_recv()) print_hex8(code);
+            print("\n");
             // FALL THROUGH
         case 0x7F:
             // all keys up