A keyboards/wekey/stelo65/config.h => keyboards/wekey/stelo65/config.h +150 -0
@@ 0,0 1,150 @@
+// Copyright 2021 @wekey (@@wekey)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x5559
+#define PRODUCT_ID 0x0003
+#define DEVICE_VER 0x0001
+#define MANUFACTURER @wekey
+#define PRODUCT Stelo65
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { F0, E6, D0, D1, C6, F7, F6, F5, F4, F1 }
+#define MATRIX_COL_PINS { C7, B6, B5, B4, D7, D6, D4, D5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#ifdef ENCODER_ENABLE
+#define ENCODERS_PAD_A { D3 }
+#define ENCODERS_PAD_B { D2 }
+#define ENCODER_RESOLUTION 2
+
+#define ENCODERS 1
+#define ENCODERS_CW_KEY { { 4, 7 } }
+#define ENCODERS_CCW_KEY { { 4, 6 } }
+#endif
+
+#define LED_CAPS_LOCK_PIN B3
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+//#define LED_NUM_LOCK_PIN B0
+//#define LED_CAPS_LOCK_PIN B1
+//#define LED_SCROLL_LOCK_PIN B2
+//#define LED_COMPOSE_PIN B3
+//#define LED_KANA_PIN B4
+
+//#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_LEVELS 3
+//#define BACKLIGHT_BREATHING
+
+//#define RGB_DI_PIN E2
+//#ifdef RGB_DI_PIN
+//# define RGBLED_NUM 16
+//# define RGBLIGHT_HUE_STEP 8
+//# define RGBLIGHT_SAT_STEP 8
+//# define RGBLIGHT_VAL_STEP 8
+//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+//# define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//# define RGBLIGHT_EFFECT_BREATHING
+//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//# define RGBLIGHT_EFFECT_SNAKE
+//# define RGBLIGHT_EFFECT_KNIGHT
+//# define RGBLIGHT_EFFECT_CHRISTMAS
+//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//# define RGBLIGHT_EFFECT_RGB_TEST
+//# define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+//#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0
A keyboards/wekey/stelo65/encoder_actions.c => keyboards/wekey/stelo65/encoder_actions.c +57 -0
@@ 0,0 1,57 @@
+/* Copyright 2020 Neil Brian Ramirez
+ * Copyright 2021 drashna jael're (@drashna)
+ * Copyright 2021 uybv
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "encoder_actions.h"
+
+#ifdef ENCODER_ENABLE
+
+# ifdef ENCODERS
+static uint8_t encoder_state[ENCODERS] = {0};
+static keypos_t encoder_cw[ENCODERS] = ENCODERS_CW_KEY;
+static keypos_t encoder_ccw[ENCODERS] = ENCODERS_CCW_KEY;
+# endif
+
+void encoder_action_unregister(void) {
+# ifdef ENCODERS
+ for (int index = 0; index < ENCODERS; ++index) {
+ if (encoder_state[index]) {
+ keyevent_t encoder_event = (keyevent_t) {
+ .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index],
+ .pressed = false,
+ .time = (timer_read() | 1)
+ };
+ encoder_state[index] = 0;
+ action_exec(encoder_event);
+ }
+ }
+# endif
+}
+
+void encoder_action_register(uint8_t index, bool clockwise) {
+# ifdef ENCODERS
+ keyevent_t encoder_event = (keyevent_t) {
+ .key = clockwise ? encoder_cw[index] : encoder_ccw[index],
+ .pressed = true,
+ .time = (timer_read() | 1)
+ };
+ encoder_state[index] = (clockwise ^ 1) | (clockwise << 1);
+ action_exec(encoder_event);
+# endif
+}
+
+#endif
A keyboards/wekey/stelo65/encoder_actions.h => keyboards/wekey/stelo65/encoder_actions.h +21 -0
@@ 0,0 1,21 @@
+/* Copyright 2020 Neil Brian Ramirez
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "quantum.h"
+
+void encoder_action_unregister(void);
+
+void encoder_action_register(uint8_t index, bool clockwise);
A keyboards/wekey/stelo65/info.json => keyboards/wekey/stelo65/info.json +10 -0
@@ 0,0 1,10 @@
+{
+ "keyboard_name": "Stelo65",
+ "url": "",
+ "maintainer": "@wekey",
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [{"label":"esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"label":"bs", "x":13, "y":0}, {"label":"del", "x":14, "y":0}, {"label":"home", "x":15, "y":0}, {"label":"vold", "x":16.25, "y":0}, {"label":"volu", "x":17.25, "y":0}, {"label":"tab", "x":0, "y":1, "w":1.5}, {"label":"q", "x":1.5, "y":1}, {"label":"w", "x":2.5, "y":1}, {"label":"e", "x":3.5, "y":1}, {"label":"r", "x":4.5, "y":1}, {"label":"t", "x":5.5, "y":1}, {"label":"y", "x":6.5, "y":1}, {"label":"u", "x":7.5, "y":1}, {"label":"i", "x":8.5, "y":1}, {"label":"o", "x":9.5, "y":1}, {"label":"p", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"\\", "x":13.5, "y":1, "w":1.5}, {"label":"end", "x":15, "y":1}, {"label":"caps", "x":0, "y":2, "w":1.75}, {"label":"a", "x":1.75, "y":2}, {"label":"s", "x":2.75, "y":2}, {"label":"d", "x":3.75, "y":2}, {"label":"f", "x":4.75, "y":2}, {"label":"g", "x":5.75, "y":2}, {"label":"h", "x":6.75, "y":2}, {"label":"j", "x":7.75, "y":2}, {"label":"k", "x":8.75, "y":2}, {"label":"l", "x":9.75, "y":2}, {"label":";", "x":10.75, "y":2}, {"label":"'", "x":11.75, "y":2}, {"label":"enter", "x":12.75, "y":2, "w":2.25}, {"label":"pgup", "x":15, "y":2}, {"label":"shift", "x":0, "y":3, "w":1.25}, {"label":"\\", "x":1.25, "y":3}, {"label":"z", "x":2.25, "y":3}, {"label":"x", "x":3.25, "y":3}, {"label":"c", "x":4.25, "y":3}, {"label":"v", "x":5.25, "y":3}, {"label":"b", "x":6.25, "y":3}, {"label":"n", "x":7.25, "y":3}, {"label":"m", "x":8.25, "y":3}, {"label":",", "x":9.25, "y":3}, {"label":".", "x":10.25, "y":3}, {"label":"/", "x":11.25, "y":3}, {"label":"shift", "x":12.25, "y":3, "w":1.75}, {"label":"up", "x":14, "y":3}, {"label":"pgdn", "x":15, "y":3}, {"label":"ctrl", "x":0, "y":4, "w":1.25}, {"label":"gui", "x":1.25, "y":4, "w":1.25}, {"label":"alt", "x":2.5, "y":4, "w":1.25}, {"label":"spacce", "x":3.75, "y":4, "w":6.25}, {"label":"alt", "x":10, "y":4, "w":1.25}, {"label":"ctrl", "x":11.25, "y":4, "w":1.25}, {"label":"left", "x":13, "y":4}, {"label":"down", "x":14, "y":4}, {"label":"right", "x":15, "y":4}]
+ }
+ }
+}
A keyboards/wekey/stelo65/keymaps/default/keymap.c => keyboards/wekey/stelo65/keymaps/default/keymap.c +29 -0
@@ 0,0 1,29 @@
+// Copyright 2021 @wekey (@@wekey)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+ _BASE,
+ _FN
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_BASE] = LAYOUT_all(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_HOME, KC_VOLD, KC_VOLU,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END,
+ MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
+ KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ [_FN] = LAYOUT_all(
+ RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______,
+ _______, _______, _______, KC_PGUP, _______, _______, _______, _______, KC_UP, _______, _______, _______, _______, _______, _______,
+ _______, _______, KC_HOME, KC_PGDN, KC_END, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______,
+ _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END
+ )
+
+};
A keyboards/wekey/stelo65/keymaps/default/readme.md => keyboards/wekey/stelo65/keymaps/default/readme.md +1 -0
@@ 0,0 1,1 @@
+# The default keymap for stelo65
A keyboards/wekey/stelo65/keymaps/via/keymap.c => keyboards/wekey/stelo65/keymaps/via/keymap.c +47 -0
@@ 0,0 1,47 @@
+// Copyright 2021 @wekey (@@wekey)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+ _BASE,
+ _FN1,
+ _FN2,
+ _FN3
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_BASE] = LAYOUT_all(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_HOME, KC_VOLD, KC_VOLU,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END,
+ MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
+ KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ [_FN1] = LAYOUT_all(
+ RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______,
+ _______, _______, _______, KC_PGUP, _______, _______, _______, _______, KC_UP, _______, _______, _______, _______, _______, _______,
+ _______, _______, KC_HOME, KC_PGDN, KC_END, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______,
+ _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END
+ ),
+
+ [_FN2] = LAYOUT_all(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+
+ [_FN3] = LAYOUT_all(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+
+};
A keyboards/wekey/stelo65/keymaps/via/rules.mk => keyboards/wekey/stelo65/keymaps/via/rules.mk +2 -0
@@ 0,0 1,2 @@
+VIA_ENABLE = yes
+
A keyboards/wekey/stelo65/readme.md => keyboards/wekey/stelo65/readme.md +27 -0
@@ 0,0 1,27 @@
+# stelo65
+
+
+
+65% keyboard with encoder.
+
+* Keyboard Maintainer: [@wekey](https://github.com/wekey-dev)
+* Hardware Supported: Stelo65 case, ATMEGA32U4
+* Hardware Availability: Group buy
+
+Make example for this keyboard (after setting up your build environment):
+
+ make stelo65:default
+
+Flashing example for this keyboard:
+
+ make stelo65:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
A keyboards/wekey/stelo65/rules.mk => keyboards/wekey/stelo65/rules.mk +22 -0
@@ 0,0 1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output
+ENCODER_ENABLE = yes
+DEBOUNCE_TYPE = sym_defer_pk
+
+SRC += encoder_actions.c
A keyboards/wekey/stelo65/stelo65.c => keyboards/wekey/stelo65/stelo65.c +16 -0
@@ 0,0 1,16 @@
+// Copyright 2021 @wekey (@@wekey)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "stelo65.h"
+#include "encoder_actions.h"
+
+void matrix_scan_kb(void) {
+ encoder_action_unregister();
+ matrix_scan_user();
+}
+
+bool encoder_update_kb(uint8_t index, bool clockwise) {
+ if (!encoder_update_user(index, clockwise)) { return false; }
+ encoder_action_register(index, clockwise);
+ return true;
+};
A keyboards/wekey/stelo65/stelo65.h => keyboards/wekey/stelo65/stelo65.h +35 -0
@@ 0,0 1,35 @@
+// Copyright 2021 @wekey (@@wekey)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_all( \
+ K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K07, K17, K46, K47, \
+ K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K37, \
+ K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K56, K57, \
+ K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K66, K76, K77, \
+ K80, K90, K81, K83, K94, K95, K86, K96, K97 \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07 }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17 }, \
+ { K20, K21, K22, K23, K24, K25, K26, ___ }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37 }, \
+ { K40, K41, K42, K43, K44, K45, K46, K47 }, \
+ { K50, K51, K52, K53, K54, K55, K56, K57 }, \
+ { K60, K61, K62, K63, K64, K65, K66, ___ }, \
+ { K70, K71, K72, K73, K74, K75, K76, K77 }, \
+ { K80, K81, ___, K83, ___, ___, K86, ___ }, \
+ { K90, ___, ___, ___, K94, K95, K96, K97 } \
+}