M keyboards/cannonkeys/obliterated75/rules.mk => keyboards/cannonkeys/obliterated75/rules.mk +0 -1
@@ 17,7 17,6 @@ MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
WS2812_DRIVER = spi
# Enter lower-power sleep mode when on the ChibiOS idle thread
M keyboards/chidori/config.h => keyboards/chidori/config.h +0 -28
@@ 220,34 220,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0
M keyboards/chidori/rules.mk => keyboards/chidori/rules.mk +0 -1
@@ 30,7 30,6 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
CUSTOM_MATRIX = lite
M keyboards/chimera_ortho_plus/rules.mk => keyboards/chimera_ortho_plus/rules.mk +0 -1
@@ 29,7 29,6 @@ MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
UNICODE_ENABLE = yes
CUSTOM_MATRIX = yes
M keyboards/choco60/rules.mk => keyboards/choco60/rules.mk +0 -1
@@ 30,6 30,5 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
SPLIT_KEYBOARD = yes # Enable split keyboard
M keyboards/ckeys/washington/config.h => keyboards/ckeys/washington/config.h +0 -28
@@ 219,34 219,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0
M keyboards/ckeys/washington/rules.mk => keyboards/ckeys/washington/rules.mk +0 -1
@@ 29,6 29,5 @@ MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
ENCODER_ENABLE = yes # Enable support for encoders
OLED_DRIVER_ENABLE = yes # Enable support for OLED displays
M keyboards/clawsome/bookerboard/rules.mk => keyboards/clawsome/bookerboard/rules.mk +0 -1
@@ 30,4 30,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/cocoa40/rules.mk => keyboards/cocoa40/rules.mk +0 -1
@@ 30,5 30,4 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
SPLIT_KEYBOARD = yes
M keyboards/converter/modelm101/rules.mk => keyboards/converter/modelm101/rules.mk +0 -1
@@ 30,4 30,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/converter/numeric_keypad_IIe/rules.mk => keyboards/converter/numeric_keypad_IIe/rules.mk +0 -1
@@ 30,4 30,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/converter/usb_usb/ble/rules.mk => keyboards/converter/usb_usb/ble/rules.mk +0 -1
@@ 17,7 17,6 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
BLUETOOTH = AdafruitBLE
ADAFRUIT_BLE_ENABLE = yes
M keyboards/copenhagen_click/click_pad_v1/config.h => keyboards/copenhagen_click/click_pad_v1/config.h +0 -28
@@ 218,34 218,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0
M keyboards/copenhagen_click/click_pad_v1/rules.mk => keyboards/copenhagen_click/click_pad_v1/rules.mk +0 -1
@@ 30,4 30,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/coseyfannitutti/discipad/config.h => keyboards/coseyfannitutti/discipad/config.h +0 -28
@@ 215,34 215,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
#define BOOTMAGIC_LITE_ROW 0
#define BOOTMAGIC_LITE_COLUMN 0
M keyboards/coseyfannitutti/discipad/rules.mk => keyboards/coseyfannitutti/discipad/rules.mk +0 -1
@@ 30,4 30,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/coseyfannitutti/discipline/config.h => keyboards/coseyfannitutti/discipline/config.h +0 -28
@@ 213,34 213,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
#define BOOTMAGIC_LITE_ROW 0
#define BOOTMAGIC_LITE_COLUMN 0
M keyboards/coseyfannitutti/discipline/rules.mk => keyboards/coseyfannitutti/discipline/rules.mk +0 -1
@@ 33,6 33,5 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
LAYOUTS = 65_ansi 65_ansi_blocker 65_iso 65_iso_blocker
M keyboards/coseyfannitutti/mullet/config.h => keyboards/coseyfannitutti/mullet/config.h +0 -27
@@ 142,30 142,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
M keyboards/coseyfannitutti/mullet/rules.mk => keyboards/coseyfannitutti/mullet/rules.mk +0 -1
@@ 30,4 30,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/coseyfannitutti/mulletpad/config.h => keyboards/coseyfannitutti/mulletpad/config.h +0 -27
@@ 142,30 142,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
M keyboards/coseyfannitutti/mulletpad/rules.mk => keyboards/coseyfannitutti/mulletpad/rules.mk +0 -1
@@ 30,6 30,5 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
LAYOUTS = numpad_5x4
M keyboards/coseyfannitutti/mysterium/config.h => keyboards/coseyfannitutti/mysterium/config.h +0 -28
@@ 211,34 211,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
#define BOOTMAGIC_LITE_ROW 0
#define BOOTMAGIC_LITE_COLUMN 0
M keyboards/coseyfannitutti/mysterium/rules.mk => keyboards/coseyfannitutti/mysterium/rules.mk +0 -1
@@ 33,6 33,5 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
LAYOUTS = tkl_ansi
M keyboards/coseyfannitutti/romeo/config.h => keyboards/coseyfannitutti/romeo/config.h +0 -28
@@ 214,34 214,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration
#define BOOTMAGIC_LITE_ROW 0
#define BOOTMAGIC_LITE_COLUMN 0
M keyboards/coseyfannitutti/romeo/rules.mk => keyboards/coseyfannitutti/romeo/rules.mk +0 -1
@@ 30,4 30,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/cospad/config.h => keyboards/cospad/config.h +0 -28
@@ 219,34 219,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0
M keyboards/cospad/rules.mk => keyboards/cospad/rules.mk +0 -1
@@ 29,6 29,5 @@ MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
LAYOUTS = numpad_6x4 ortho_6x4
M keyboards/cu80/rules.mk => keyboards/cu80/rules.mk +0 -1
@@ 30,6 30,5 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
LAYOUTS = tkl_iso tkl_ansi
M keyboards/cutie_club/wraith/config.h => keyboards/cutie_club/wraith/config.h +0 -28
@@ 216,34 216,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0
M keyboards/cutie_club/wraith/rules.mk => keyboards/cutie_club/wraith/rules.mk +0 -1
@@ 27,4 27,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/daisy/config.h => keyboards/daisy/config.h +0 -28
@@ 218,34 218,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0
M keyboards/daisy/rules.mk => keyboards/daisy/rules.mk +0 -1
@@ 29,4 29,3 @@ MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/dc01/arrow/rules.mk => keyboards/dc01/arrow/rules.mk +0 -1
@@ 29,7 29,6 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in
CUSTOM_MATRIX = yes # Use custom matrix
SRC += matrix.c \
M keyboards/dc01/left/rules.mk => keyboards/dc01/left/rules.mk +0 -1
@@ 29,7 29,6 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
CUSTOM_MATRIX = yes # Use custom matrix
SRC += matrix.c \
i2c_master.c
M keyboards/dc01/numpad/rules.mk => keyboards/dc01/numpad/rules.mk +0 -1
@@ 29,7 29,6 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in
CUSTOM_MATRIX = yes # Use custom matrix
SRC += matrix.c \
M keyboards/dc01/right/rules.mk => keyboards/dc01/right/rules.mk +0 -1
@@ 29,7 29,6 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in
CUSTOM_MATRIX = yes # Use custom matrix
SRC += matrix.c \
M keyboards/deltasplit75/rules.mk => keyboards/deltasplit75/rules.mk +0 -1
@@ 29,7 29,6 @@ MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
SPLIT_KEYBOARD = yes
M keyboards/dm9records/plaid/config.h => keyboards/dm9records/plaid/config.h +0 -28
@@ 215,34 215,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0
M keyboards/dm9records/plaid/rules.mk => keyboards/dm9records/plaid/rules.mk +0 -1
@@ 30,7 30,6 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
LAYOUTS = ortho_4x12 planck_mit
LAYOUTS_HAS_RGB = no
M keyboards/dm9records/tartan/config.h => keyboards/dm9records/tartan/config.h +0 -28
@@ 213,34 213,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0
M keyboards/dm9records/tartan/rules.mk => keyboards/dm9records/tartan/rules.mk +0 -1
@@ 30,7 30,6 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_iso_split_bs_rshift
LAYOUTS_HAS_RGB = no
M keyboards/dmqdesign/spin/rules.mk => keyboards/dmqdesign/spin/rules.mk +0 -1
@@ 30,5 30,4 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
ENCODER_ENABLE = yes # Enable rotary encoder support
M keyboards/doppelganger/rules.mk => keyboards/doppelganger/rules.mk +0 -1
@@ 30,5 30,4 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
SPLIT_KEYBOARD = yes
M keyboards/doro67/multi/rules.mk => keyboards/doro67/multi/rules.mk +0 -1
@@ 29,6 29,5 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
LAYOUTS = 65_ansi_blocker
M keyboards/doro67/regular/rules.mk => keyboards/doro67/regular/rules.mk +0 -1
@@ 30,6 30,5 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
LAYOUTS = 65_ansi_blocker
M keyboards/doro67/rgb/rules.mk => keyboards/doro67/rgb/rules.mk +0 -1
@@ 30,7 30,6 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
RGB_MATRIX_ENABLE = WS2812
LAYOUTS = 65_ansi_blocker
M keyboards/dozen0/config.h => keyboards/dozen0/config.h +0 -28
@@ 189,34 189,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0
M keyboards/dozen0/rules.mk => keyboards/dozen0/rules.mk +0 -1
@@ 30,4 30,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/duck/jetfire/config.h => keyboards/duck/jetfire/config.h +0 -27
@@ 167,30 167,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
M keyboards/duck/jetfire/rules.mk => keyboards/duck/jetfire/rules.mk +0 -1
@@ 31,7 31,6 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
CUSTOM_MATRIX = yes
SRC += indicator_leds.c \
M keyboards/dumbpad/config.h => keyboards/dumbpad/config.h +0 -28
@@ 230,34 230,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0
M keyboards/dumbpad/rules.mk => keyboards/dumbpad/rules.mk +0 -1
@@ 30,7 30,6 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
ENCODER_ENABLE = yes
MOUSEKEY_ENABLE = yes
M keyboards/dztech/dz60rgb/v1/rules.mk => keyboards/dztech/dz60rgb/v1/rules.mk +0 -1
@@ 19,6 19,5 @@ MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in
M keyboards/dztech/dz60rgb/v2/rules.mk => keyboards/dztech/dz60rgb/v2/rules.mk +0 -1
@@ 29,6 29,5 @@ MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in
M keyboards/dztech/dz60rgb_ansi/v1/rules.mk => keyboards/dztech/dz60rgb_ansi/v1/rules.mk +0 -1
@@ 19,6 19,5 @@ MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in
M keyboards/dztech/dz60rgb_ansi/v2/rules.mk => keyboards/dztech/dz60rgb_ansi/v2/rules.mk +0 -1
@@ 29,6 29,5 @@ MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in
M keyboards/dztech/dz60rgb_wkl/v1/rules.mk => keyboards/dztech/dz60rgb_wkl/v1/rules.mk +0 -1
@@ 19,7 19,6 @@ MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in
M keyboards/dztech/dz60rgb_wkl/v2/rules.mk => keyboards/dztech/dz60rgb_wkl/v2/rules.mk +0 -1
@@ 29,7 29,6 @@ MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in
M keyboards/dztech/dz65rgb/v1/rules.mk => keyboards/dztech/dz65rgb/v1/rules.mk +0 -1
@@ 19,7 19,6 @@ MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
RGB_MATRIX_ENABLE = IS31FL3731 # Use RGB matrix
LAYOUTS = 65_ansi
M keyboards/dztech/dz65rgb/v2/rules.mk => keyboards/dztech/dz65rgb/v2/rules.mk +0 -1
@@ 29,7 29,6 @@ MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
RGB_MATRIX_ENABLE = IS31FL3731 # Use RGB matrix
LAYOUTS = 65_ansi
M keyboards/efreet/config.h => keyboards/efreet/config.h +0 -28
@@ 212,34 212,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0
M keyboards/efreet/rules.mk => keyboards/efreet/rules.mk +0 -1
@@ 27,6 27,5 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
LAYOUTS = ortho_4x12 planck_mit
M keyboards/eniigmakeyboards/ek87/config.h => keyboards/eniigmakeyboards/ek87/config.h +0 -28
@@ 217,34 217,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0
M keyboards/eniigmakeyboards/ek87/rules.mk => keyboards/eniigmakeyboards/ek87/rules.mk +0 -1
@@ 29,4 29,3 @@ MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/ep/40/rules.mk => keyboards/ep/40/rules.mk +0 -1
@@ 30,4 30,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/ep/96/config.h => keyboards/ep/96/config.h +0 -27
@@ 176,30 176,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
M keyboards/ep/96/rules.mk => keyboards/ep/96/rules.mk +0 -1
@@ 30,4 30,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/ep/comsn/hs68/rules.mk => keyboards/ep/comsn/hs68/rules.mk +0 -1
@@ 30,4 30,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/ep/comsn/mollydooker/config.h => keyboards/ep/comsn/mollydooker/config.h +0 -27
@@ 185,30 185,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
M keyboards/ep/comsn/mollydooker/rules.mk => keyboards/ep/comsn/mollydooker/rules.mk +0 -1
@@ 30,4 30,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/ep/comsn/tf_longeboye/rules.mk => keyboards/ep/comsn/tf_longeboye/rules.mk +0 -1
@@ 30,4 30,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/ergo42/rules.mk => keyboards/ergo42/rules.mk +0 -1
@@ 29,7 29,6 @@ MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
SPLIT_KEYBOARD = yes
M keyboards/ergosaurus/config.h => keyboards/ergosaurus/config.h +0 -28
@@ 218,34 218,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
#define BOOTMAGIC_LITE_ROW 0
#define BOOTMAGIC_LITE_COLUMN 0
M keyboards/ergosaurus/rules.mk => keyboards/ergosaurus/rules.mk +0 -1
@@ 30,4 30,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/ericrlau/numdiscipline/rev1/config.h => keyboards/ericrlau/numdiscipline/rev1/config.h +0 -28
@@ 215,34 215,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
#define BOOTMAGIC_LITE_ROW 0
#define BOOTMAGIC_LITE_COLUMN 0
M keyboards/ericrlau/numdiscipline/rev1/rules.mk => keyboards/ericrlau/numdiscipline/rev1/rules.mk +0 -1
@@ 33,4 33,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/exclusive/e6v2/le_bmc/rules.mk => keyboards/exclusive/e6v2/le_bmc/rules.mk +0 -1
@@ 31,4 31,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/exclusive/e6v2/oe_bmc/rules.mk => keyboards/exclusive/e6v2/oe_bmc/rules.mk +0 -1
@@ 31,4 31,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/exclusive/e7v1se/config.h => keyboards/exclusive/e7v1se/config.h +0 -28
@@ 218,34 218,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0
M keyboards/exclusive/e7v1se/rules.mk => keyboards/exclusive/e7v1se/rules.mk +0 -1
@@ 29,4 29,3 @@ MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/felix/config.h => keyboards/felix/config.h +0 -28
@@ 199,34 199,6 @@
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0
M keyboards/felix/rules.mk => keyboards/felix/rules.mk +0 -1
@@ 29,6 29,5 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
LAYOUTS = ortho_5x4
M keyboards/fluorite/config.h => keyboards/fluorite/config.h +0 -28
@@ 211,34 211,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0
M keyboards/fluorite/rules.mk => keyboards/fluorite/rules.mk +0 -1
@@ 30,6 30,5 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
SPLIT_KEYBOARD = yes
M keyboards/flx/lodestone/rules.mk => keyboards/flx/lodestone/rules.mk +0 -1
@@ 29,7 29,6 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
LTO_ENABLE = yes
LAYOUTS = 65_ansi_blocker 65_iso_blocker
M keyboards/flx/virgo/rules.mk => keyboards/flx/virgo/rules.mk +0 -1
@@ 30,6 30,5 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
LINK_TIME_OPTIMIZATION_ENABLE = yes
M keyboards/fortitude60/rules.mk => keyboards/fortitude60/rules.mk +0 -1
@@ 29,7 29,6 @@ MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
SPLIT_KEYBOARD = yes
M keyboards/foxlab/leaf60/hotswap/config.h => keyboards/foxlab/leaf60/hotswap/config.h +0 -28
@@ 196,34 196,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0
M keyboards/foxlab/leaf60/hotswap/rules.mk => keyboards/foxlab/leaf60/hotswap/rules.mk +0 -1
@@ 30,4 30,3 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
M keyboards/foxlab/leaf60/universal/config.h => keyboards/foxlab/leaf60/universal/config.h +0 -28
@@ 196,34 196,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-/*
- * HD44780 LCD Display Configuration
- */
-/*
-#define LCD_LINES 2 //< number of visible lines of the display
-#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
-
-#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
-
-#if LCD_IO_MODE
-#define LCD_PORT PORTB //< port for the LCD lines
-#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
-#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
-#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
-#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
-#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
-#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
-#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
-#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
-#define LCD_RS_PORT LCD_PORT //< port for RS line
-#define LCD_RS_PIN 3 //< pin for RS line
-#define LCD_RW_PORT LCD_PORT //< port for RW line
-#define LCD_RW_PIN 2 //< pin for RW line
-#define LCD_E_PORT LCD_PORT //< port for Enable line
-#define LCD_E_PIN 1 //< pin for Enable line
-#endif
-*/
-
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0
M keyboards/foxlab/leaf60/universal/rules.mk => keyboards/foxlab/leaf60/universal/rules.mk +0 -1
@@ 30,6 30,5 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
LAYOUTS = 60_ansi 60_hhkb
M keyboards/freyr/rules.mk => keyboards/freyr/rules.mk +0 -1
@@ 30,7 30,6 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs
# Supported layouts
LAYOUTS = tkl_ansi tkl_iso
M keyboards/funky40/rules.mk => keyboards/funky40/rules.mk +0 -1
@@ 29,4 29,3 @@ MIDI_ENABLE = no # MIDI support
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs>
\ No newline at end of file