M keyboards/ares/config.h => keyboards/ares/config.h +1 -1
@@ 23,7 23,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
#define MANUFACTURER LSJ
-#define PRODUCT QMK Firmware for Ares
+#define PRODUCT Ares
#define RGBLED_NUM 16
M keyboards/ares/usbconfig.h => keyboards/ares/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'L', 'S', 'J'
-#define USB_CFG_VENDOR_NAME_LEN 3
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'A', 'r', 'e', 's'
-#define USB_CFG_DEVICE_NAME_LEN 4
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/bfake/config.h => keyboards/bfake/config.h +2 -2
@@ 22,8 22,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
-#define MANUFACTURER NotActuallyWinkeyless
-#define PRODUCT b.fake
+#define MANUFACTURER NotWinkeyless
+#define PRODUCT B.fake
#define RGBLED_NUM 16
M keyboards/bfake/usbconfig.h => keyboards/bfake/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/chidori/usbconfig.h => keyboards/chidori/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'K','a','g','i','z','a','r','a','y','a'
-#define USB_CFG_VENDOR_NAME_LEN 10
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'C', 'h', 'i', 'd', 'o', 'r', 'i'
-#define USB_CFG_DEVICE_NAME_LEN 7
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/coseyfannitutti/discipad/usbconfig.h => keyboards/coseyfannitutti/discipad/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'c','o','s','e','y','f','a','n','n','i','t','u','t','t','i'
-#define USB_CFG_VENDOR_NAME_LEN 15
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'D','I','S','C','I','P','A','D'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-#define USB_CFG_SERIAL_NUMBER '0'
-#define USB_CFG_SERIAL_NUMBER_LEN 1
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/coseyfannitutti/discipline/usbconfig.h => keyboards/coseyfannitutti/discipline/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'c','o','s','e','y','f','a','n','n','i','t','u','t','t','i'
-#define USB_CFG_VENDOR_NAME_LEN 15
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'D','I','S','C','I','P','L','I','N','E'
-#define USB_CFG_DEVICE_NAME_LEN 10
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-#define USB_CFG_SERIAL_NUMBER '0'
-#define USB_CFG_SERIAL_NUMBER_LEN 1
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/coseyfannitutti/mysterium/usbconfig.h => keyboards/coseyfannitutti/mysterium/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'c','o','s','e','y','f','a','n','n','i','t','u','t','t','i'
-#define USB_CFG_VENDOR_NAME_LEN 15
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'M','Y','S','T','E','R','I','U','M'
-#define USB_CFG_DEVICE_NAME_LEN 9
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-#define USB_CFG_SERIAL_NUMBER '0'
-#define USB_CFG_SERIAL_NUMBER_LEN 1
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/coseyfannitutti/romeo/usbconfig.h => keyboards/coseyfannitutti/romeo/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'c','o','s','e','y','f','a','n','n','i','t','u','t','t','i'
-#define USB_CFG_VENDOR_NAME_LEN 15
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'R','O','M','E','O'
-#define USB_CFG_DEVICE_NAME_LEN 5
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-#define USB_CFG_SERIAL_NUMBER '0'
-#define USB_CFG_SERIAL_NUMBER_LEN 1
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/db/db63/config.h => keyboards/db/db63/config.h +0 -2
@@ 20,8 20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0xFAAD
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
-// You can edit those at usbconfig.h about line 250. These values will
-// unforunatly be ignored so far
#define MANUFACTURER HNB
#define PRODUCT DB63v1 Hotswap
M keyboards/db/db63/usbconfig.h => keyboards/db/db63/usbconfig.h +5 -30
@@ 230,31 230,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'H', 'N', 'B'
-#define USB_CFG_VENDOR_NAME_LEN 3
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'D', 'B', '6', '3', 'H', 'S'
-#define USB_CFG_DEVICE_NAME_LEN 6
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 336,11 311,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/donutcables/budget96/usbconfig.h => keyboards/donutcables/budget96/usbconfig.h +5 -30
@@ 230,31 230,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'D', 'o', 'n', 'u', 't', 'C', 'a', 'b', 'l', 'e', 's'
-#define USB_CFG_VENDOR_NAME_LEN 11
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'b', 'u', 'd', 'g', 'e', 't', '9', '6'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 336,11 311,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/eve/meteor/usbconfig.h => keyboards/eve/meteor/usbconfig.h +5 -30
@@ 220,31 220,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 326,11 301,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/exclusive/e6v2/le_bmc/config.h => keyboards/exclusive/e6v2/le_bmc/config.h +2 -2
@@ 21,8 21,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0000
#define DEVICE_VER 0x0001
-#define MANUFACTURER exclusive
-#define PRODUCT e6v2 le bmc
+#define MANUFACTURER Exclusive / E-Team
+#define PRODUCT E6-V2 LE BMC
#define DESCRIPTION A custom 60% keyboard
/* key matrix size */
M keyboards/exclusive/e6v2/le_bmc/usbconfig.h => keyboards/exclusive/e6v2/le_bmc/usbconfig.h +5 -30
@@ 230,31 230,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'E', 'x', 'c', 'l', 'u', 's', 'i', 'v', 'e'
-#define USB_CFG_VENDOR_NAME_LEN 9
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'E', '6', 'V', '2'
-#define USB_CFG_DEVICE_NAME_LEN 4
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 336,11 311,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/exclusive/e6v2/oe_bmc/config.h => keyboards/exclusive/e6v2/oe_bmc/config.h +2 -2
@@ 21,8 21,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0000
#define DEVICE_VER 0x0001
-#define MANUFACTURER exclusive
-#define PRODUCT e6v2 oe bmc
+#define MANUFACTURER Exclusive / E-Team
+#define PRODUCT E6-V2 OE BMC
#define DESCRIPTION A custom 60% keyboard
/* key matrix size */
M keyboards/exclusive/e6v2/oe_bmc/usbconfig.h => keyboards/exclusive/e6v2/oe_bmc/usbconfig.h +5 -30
@@ 230,31 230,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'E', 'x', 'c', 'l', 'u', 's', 'i', 'v', 'e'
-#define USB_CFG_VENDOR_NAME_LEN 9
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'E', '6', 'V', '2'
-#define USB_CFG_DEVICE_NAME_LEN 4
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 336,11 311,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/exent/usbconfig.h => keyboards/exent/usbconfig.h +5 -30
@@ 220,31 220,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 326,11 301,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/facew/config.h => keyboards/facew/config.h +2 -2
@@ 22,8 22,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
-#define MANUFACTURER NotActuallyWinkeyless
-#define PRODUCT facew
+#define MANUFACTURER SPRiT
+#define PRODUCT FaceW
#define RGBLED_NUM 16
M keyboards/facew/usbconfig.h => keyboards/facew/usbconfig.h +5 -30
@@ 230,31 230,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'S', 'p', 'r', 'i', 't'
-#define USB_CFG_VENDOR_NAME_LEN 5
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'F', 'a', 'c', 'e', 'W'
-#define USB_CFG_DEVICE_NAME_LEN 5
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 336,11 311,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/ft/mars80/usbconfig.h => keyboards/ft/mars80/usbconfig.h +5 -30
@@ 230,31 230,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'f', 't'
-#define USB_CFG_VENDOR_NAME_LEN 2
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'm', 'a', 'r', 's', '8', '0'
-#define USB_CFG_DEVICE_NAME_LEN 6
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 336,11 311,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/gingham/usbconfig.h => keyboards/gingham/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'Y','i','a','n','c','a','r','-','D','e', 's', 'i', 'g', 'n', 's'
-#define USB_CFG_VENDOR_NAME_LEN 15
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'G', 'i', 'n', 'g', 'h', 'a', 'm'
-#define USB_CFG_DEVICE_NAME_LEN 7
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-#define USB_CFG_SERIAL_NUMBER '0'
-#define USB_CFG_SERIAL_NUMBER_LEN 1
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/gray_studio/hb85/usbconfig.h => keyboards/gray_studio/hb85/usbconfig.h +5 -30
@@ 230,31 230,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'G', 'r', 'a', 'y', ' ', 'S', 't', 'u', 'd', 'i', 'o'
-#define USB_CFG_VENDOR_NAME_LEN 11
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'H', 'B', '8', '5'
-#define USB_CFG_DEVICE_NAME_LEN 4
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 336,11 311,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/handwired/hnah40/config.h => keyboards/handwired/hnah40/config.h +1 -1
@@ 23,7 23,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PRODUCT_ID 0x0000
#define DEVICE_VER 0x0002
#define MANUFACTURER HnahKB
-#define PRODUCT hnah40
+#define PRODUCT Hnah40
#define DESCRIPTION Custom 40% PCB
/* key matrix size */
M keyboards/handwired/hnah40/usbconfig.h => keyboards/handwired/hnah40/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'H','n','a','h','K','B'
-#define USB_CFG_VENDOR_NAME_LEN 6
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'H', 'n', 'a', 'h', '4', '0'
-#define USB_CFG_DEVICE_NAME_LEN 6
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-#define USB_CFG_SERIAL_NUMBER 'H','n','a','h','K','B'
-#define USB_CFG_SERIAL_NUMBER_LEN 6
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/j80/usbconfig.h => keyboards/j80/usbconfig.h +5 -30
@@ 220,31 220,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'J', 'E', 'R'
-#define USB_CFG_VENDOR_NAME_LEN 3
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'J', '8', '0'
-#define USB_CFG_DEVICE_NAME_LEN 3
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 326,11 301,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/jc65/v32a/config.h => keyboards/jc65/v32a/config.h +2 -2
@@ 22,8 22,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0x1234
#define PRODUCT_ID 0x5679
#define DEVICE_VER 0x0200
-#define MANUFACTURER winkeyless.kr
-#define PRODUCT JC65 PS2AVRGB
+#define MANUFACTURER RAMA
+#define PRODUCT JC65 BMC
/* matrix size */
#define MATRIX_ROWS 7
M keyboards/jc65/v32a/usbconfig.h => keyboards/jc65/v32a/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/jj40/config.h => keyboards/jj40/config.h +2 -4
@@ 19,10 19,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
-// TODO: share these strings with usbconfig.h
-// Edit usbconfig.h to change these.
-#define MANUFACTURER Kprepublic
-#define PRODUCT jj40
+#define MANUFACTURER KPrepublic
+#define PRODUCT JJ40
/* matrix size */
#define MATRIX_ROWS 4
M keyboards/jj40/usbconfig.h => keyboards/jj40/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'j', 'j', '4', '0'
-#define USB_CFG_DEVICE_NAME_LEN 4
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/jj4x4/config.h => keyboards/jj4x4/config.h +2 -4
@@ 22,10 22,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
-// TODO: share these strings with usbconfig.h
-// Edit usbconfig.h to change these.
-#define MANUFACTURER Kprepublic
-#define PRODUCT jj4x4
+#define MANUFACTURER KPrepublic
+#define PRODUCT JJ4x4
/* matrix size */
#define MATRIX_ROWS 4
M keyboards/jj4x4/usbconfig.h => keyboards/jj4x4/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'j', 'j', '4', 'x', '4'
-#define USB_CFG_DEVICE_NAME_LEN 5
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/jj50/config.h => keyboards/jj50/config.h +2 -4
@@ 25,10 25,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
-// TODO: share these strings with usbconfig.h
-// Edit usbconfig.h to change these.
-#define MANUFACTURER kprepublic
-#define PRODUCT jj50
+#define MANUFACTURER KPrepublic
+#define PRODUCT JJ50
#define DESCRIPTION Preonic-like clone
/* matrix size */
M keyboards/jj50/usbconfig.h => keyboards/jj50/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'K', 'P', 'R', 'e', 'p', 'u', 'b', 'l', 'i', 'c'
-#define USB_CFG_VENDOR_NAME_LEN 10
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'J','J','5','0',' ','K','e','y','b','o','a','r','d'
-#define USB_CFG_DEVICE_NAME_LEN 13
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/kbdfans/kbdpad/mk1/config.h => keyboards/kbdfans/kbdpad/mk1/config.h +1 -1
@@ 23,7 23,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
#define MANUFACTURER KBDfans
-#define PRODUCT KBDPAD-MKI
+#define PRODUCT KBDPAD Mk. I
#define MATRIX_ROWS 6
#define MATRIX_COLS 4
M keyboards/kbdfans/kbdpad/mk1/usbconfig.h => keyboards/kbdfans/kbdpad/mk1/usbconfig.h +5 -30
@@ 230,31 230,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 336,11 311,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/keycapsss/plaid_pad/usbconfig.h => keyboards/keycapsss/plaid_pad/usbconfig.h +5 -30
@@ 230,31 230,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'K','e','y','c','a','p','s','s','s'
-#define USB_CFG_VENDOR_NAME_LEN 9
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'P', 'l', 'a', 'i', 'd', '-', 'P', 'a', 'd'
-#define USB_CFG_DEVICE_NAME_LEN 9
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 336,11 311,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/kira80/usbconfig.h => keyboards/kira80/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'E', 'V', 'E'
-#define USB_CFG_VENDOR_NAME_LEN 3
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'K', 'i', 'r', 'a', '8', '0'
-#define USB_CFG_DEVICE_NAME_LEN 6
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/leeku/finger65/config.h => keyboards/leeku/finger65/config.h +1 -1
@@ 24,7 24,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PRODUCT_ID 0x6050
#define DEVICE_VER 0x0100
#define MANUFACTURER LeeKu
-#define PRODUCT L3
+#define PRODUCT Finger65
#define DESCRIPTION QMK keyboard firmware for L3
#define RGBLED_NUM 12
M keyboards/leeku/finger65/usbconfig.h => keyboards/leeku/finger65/usbconfig.h +5 -30
@@ 230,31 230,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'L', 'e', 'e', 'k', 'u'
-#define USB_CFG_VENDOR_NAME_LEN 5
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'F', 'i', 'n', 'g', 'e', 'r', '6', '5'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 335,11 310,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_UNKNOWN 0
M keyboards/mechmini/v1/config.h => keyboards/mechmini/v1/config.h +0 -2
@@ 22,8 22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0xCA40
#define DEVICE_VER 0x0001
-// TODO: share these strings with usbconfig.h
-// Edit usbconfig.h to change these.
#define MANUFACTURER MECHKEYS
#define PRODUCT Mechmini
#define DESCRIPTION 40% modular keyboard
M keyboards/mechmini/v1/usbconfig.h => keyboards/mechmini/v1/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/mehkee96/config.h => keyboards/mehkee96/config.h +2 -2
@@ 6,8 6,8 @@
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
-#define MANUFACTURER mehkee
-#define PRODUCT 96kee
+#define MANUFACTURER Mehkee
+#define PRODUCT 96KEE
/* matrix size */
#define MATRIX_ROWS 8
M keyboards/mehkee96/usbconfig.h => keyboards/mehkee96/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/mt40/config.h => keyboards/mt40/config.h +1 -1
@@ 27,7 27,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DEVICE_VER 0x0001
#define MANUFACTURER ThomasDehaeze
-#define PRODUCT mt40
+#define PRODUCT MT40
#define DESCRIPTION A Planck clone
M keyboards/mt40/usbconfig.h => keyboards/mt40/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'T', 'h', 'o', 'm', 'a', 's', 'D', 'e', 'h', 'a', 'e', 'z', 'e'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'c', 'u', 's', 't', 'o', 'm', '4', '8'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/panc60/config.h => keyboards/panc60/config.h +1 -1
@@ 23,7 23,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
#define MANUFACTURER Panc Interactive
-#define PRODUCT panc60
+#define PRODUCT Panc60
#define RGBLED_NUM 12
M keyboards/panc60/usbconfig.h => keyboards/panc60/usbconfig.h +5 -30
@@ 230,31 230,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 336,11 311,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/pearl/usbconfig.h => keyboards/pearl/usbconfig.h +5 -30
@@ 230,31 230,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 336,11 311,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/percent/canoe/config.h => keyboards/percent/canoe/config.h +1 -1
@@ 23,7 23,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
-#define MANUFACTURER NotActuallyPercent
+#define MANUFACTURER Percent Studios
#define PRODUCT CANOE
#define RGBLED_NUM 2
M keyboards/percent/canoe/usbconfig.h => keyboards/percent/canoe/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/percent/skog/config.h => keyboards/percent/skog/config.h +1 -1
@@ 21,7 21,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
-#define MANUFACTURER Percent
+#define MANUFACTURER Percent Studios
#define PRODUCT Skog TKL
/* matrix size */
M keyboards/percent/skog/usbconfig.h => keyboards/percent/skog/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'P','e','r','c','e','n','t'
-#define USB_CFG_VENDOR_NAME_LEN 7
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'S','k','o','g',' ','T','K','L'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/percent/skog_lite/config.h => keyboards/percent/skog_lite/config.h +1 -1
@@ 22,7 22,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
-#define MANUFACTURER Percent
+#define MANUFACTURER Percent Studios
#define PRODUCT Skog Lite
#define RGBLED_NUM 18
M keyboards/percent/skog_lite/usbconfig.h => keyboards/percent/skog_lite/usbconfig.h +5 -30
@@ 230,31 230,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 336,11 311,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/plaid/config.h => keyboards/plaid/config.h +1 -1
@@ 25,7 25,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PRODUCT_ID 0x27db
#define DEVICE_VER 0x0002
#define MANUFACTURER dm9records
-#define PRODUCT plaid
+#define PRODUCT Plaid
#define DESCRIPTION 12x4 ortholinear keyboard with through hole components
/* key matrix size */
M keyboards/plaid/usbconfig.h => keyboards/plaid/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'd','m','9','r','e','c','o','r','d','s'
-#define USB_CFG_VENDOR_NAME_LEN 10
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'P', 'l', 'a', 'i', 'd'
-#define USB_CFG_DEVICE_NAME_LEN 5
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-#define USB_CFG_SERIAL_NUMBER 'd','m','9','r','e','c','o','r','d','s','.','c','o','m',':','p','1'
-#define USB_CFG_SERIAL_NUMBER_LEN 17
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/singa/usbconfig.h => keyboards/singa/usbconfig.h +5 -30
@@ 230,31 230,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 336,11 311,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/tartan/usbconfig.h => keyboards/tartan/usbconfig.h +5 -30
@@ 230,31 230,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'd','m','9','r','e','c','o','r','d','s'
-#define USB_CFG_VENDOR_NAME_LEN 10
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'T', 'a', 'r', 't', 'a', 'n'
-#define USB_CFG_DEVICE_NAME_LEN 6
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-#define USB_CFG_SERIAL_NUMBER 'd','m','9','r','e','c','o','r','d','s','.','c','o','m',':','t','1'
-#define USB_CFG_SERIAL_NUMBER_LEN 17
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 336,11 311,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/tgr/alice/config.h => keyboards/tgr/alice/config.h +1 -3
@@ 20,10 20,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422E
#define DEVICE_VER 0x0200
-// TODO: share these strings with usbconfig.h
-// Edit usbconfig.h to change these.
#define MANUFACTURER TGR
-#define PRODUCT TGR Alice
+#define PRODUCT Alice
/* matrix size */
#define MATRIX_ROWS 6
M keyboards/tgr/alice/usbconfig.h => keyboards/tgr/alice/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'T', 'G', 'R'
-#define USB_CFG_VENDOR_NAME_LEN 3
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'T', 'G', 'R', ' ', 'A', 'l', 'i', 'c', 'e'
-#define USB_CFG_DEVICE_NAME_LEN 9
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/tgr/jane/usbconfig.h => keyboards/tgr/jane/usbconfig.h +5 -30
@@ 230,31 230,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 336,11 311,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/unikorn/config.h => keyboards/unikorn/config.h +2 -2
@@ 22,8 22,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
-#define MANUFACTURER Singa and TGR
-#define PRODUCT Unikorn 60
+#define MANUFACTURER Singa x TGR
+#define PRODUCT Unikorn60
#define MATRIX_ROWS 5
#define MATRIX_COLS 15
M keyboards/unikorn/usbconfig.h => keyboards/unikorn/usbconfig.h +5 -30
@@ 230,31 230,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 's', 'i', 'n', 'g', 'a', 't', 'g', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 8
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'u', 'n', 'i', 'k', 'o', 'r', 'n'
-#define USB_CFG_DEVICE_NAME_LEN 7
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 336,11 311,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/winkeyless/bface/config.h => keyboards/winkeyless/bface/config.h +2 -4
@@ 21,10 21,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
-// You can edit those at usbconfig.h about line 250. These values will
-// unforunatly be ignored so far
-#define MANUFACTURER winkeyless.kr
-#define PRODUCT b.face
+#define MANUFACTURER Winkeyless
+#define PRODUCT B.face
/* matrix size */
#define MATRIX_ROWS 8
M keyboards/winkeyless/bface/usbconfig.h => keyboards/winkeyless/bface/usbconfig.h +5 -30
@@ 230,31 230,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'b', '.', 'f', 'a', 'c', 'e'
-#define USB_CFG_DEVICE_NAME_LEN 6
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 336,11 311,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/winkeyless/bmini/config.h => keyboards/winkeyless/bmini/config.h +1 -1
@@ 22,7 22,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
-#define MANUFACTURER winkeyless.kr
+#define MANUFACTURER Winkeyless
#define PRODUCT B.mini
#define RGBLED_NUM 16
M keyboards/winkeyless/bmini/usbconfig.h => keyboards/winkeyless/bmini/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/winkeyless/bminiex/config.h => keyboards/winkeyless/bminiex/config.h +2 -2
@@ 22,8 22,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422E
#define DEVICE_VER 0x0200
-#define MANUFACTURER winkeyless.kr
-#define PRODUCT B.mini Ex
+#define MANUFACTURER Winkeyless
+#define PRODUCT B.mini EX
#define RGBLED_NUM 20
M keyboards/winkeyless/bminiex/usbconfig.h => keyboards/winkeyless/bminiex/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
-#define USB_CFG_DEVICE_NAME_LEN 8
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/ymd75/config.h => keyboards/ymd75/config.h +1 -4
@@ 24,11 24,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
-
-// TODO: share these strings with usbconfig.h
-// Edit usbconfig.h to change these.
#define MANUFACTURER YMDK
-#define PRODUCT ymd75 / mt84
+#define PRODUCT YMD75 / MT84
#define DESCRIPTION 75% Keyboard
/* matrix size */
M keyboards/ymd75/usbconfig.h => keyboards/ymd75/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'Y', 'M', 'D', 'K'
-#define USB_CFG_VENDOR_NAME_LEN 4
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'Y','M','D','7','5',' ','K','e','y','b','o','a','r','d'
-#define USB_CFG_DEVICE_NAME_LEN 14
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/ymd96/config.h => keyboards/ymd96/config.h +2 -3
@@ 23,9 23,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
-// Edit usbconfig.h to change these.
-#define MANUFACTURER ymdkey
-#define PRODUCT ymd96
+#define MANUFACTURER YMDK
+#define PRODUCT YMD96
/* matrix size */
#define MATRIX_ROWS 8
M keyboards/ymd96/usbconfig.h => keyboards/ymd96/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'y','m','d','k','e','y'
-#define USB_CFG_VENDOR_NAME_LEN 6
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'y','m','d','9','6'
-#define USB_CFG_DEVICE_NAME_LEN 5
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/ymdk/bface/config.h => keyboards/ymdk/bface/config.h +1 -3
@@ 20,10 20,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
-// You can edit those at usbconfig.h about line 250. These values will
-// unforunatly be ignored so far
#define MANUFACTURER YMDK
-#define PRODUCT bface
+#define PRODUCT B.face
/* matrix size */
#define MATRIX_ROWS 5
M keyboards/ymdk/bface/usbconfig.h => keyboards/ymdk/bface/usbconfig.h +5 -30
@@ 230,31 230,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'Y', 'M', 'D', 'K'
-#define USB_CFG_VENDOR_NAME_LEN 4
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'b', 'f', 'a', 'c', 'e'
-#define USB_CFG_DEVICE_NAME_LEN 5
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 336,11 311,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M keyboards/ymdk_np21/config.h => keyboards/ymdk_np21/config.h +2 -4
@@ 22,10 22,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200
-// TODO: share these strings with usbconfig.h
-// Edit usbconfig.h to change these.
-#define MANUFACTURER ymdk
-#define PRODUCT np21
+#define MANUFACTURER YMDK
+#define PRODUCT NP21
/* matrix size */
#define MATRIX_ROWS 4
M keyboards/ymdk_np21/usbconfig.h => keyboards/ymdk_np21/usbconfig.h +5 -30
@@ 231,31 231,6 @@ section at the end of this file).
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
/* Version number of the device: Minor number first, then major number.
*/
-#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
-#define USB_CFG_VENDOR_NAME_LEN 13
-/* These two values define the vendor name returned by the USB device. The name
- * must be given as a list of characters under single quotes. The characters
- * are interpreted as Unicode (UTF-16) entities.
- * If you don't want a vendor name string, undefine these macros.
- * ALWAYS define a vendor name containing your Internet domain name if you use
- * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
- * details.
- */
-#define USB_CFG_DEVICE_NAME 'j', 'j', '4', '0'
-#define USB_CFG_DEVICE_NAME_LEN 4
-/* Same as above for the device name. If you don't want a device name, undefine
- * the macros. See the file USB-IDs-for-free.txt before you assign a name if
- * you use a shared VID/PID.
- */
-/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
-/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
-/* Same as above for the serial number. If you don't want a serial number,
- * undefine the macros.
- * It may be useful to provide the serial number through other means than at
- * compile time. See the section about descriptor properties below for how
- * to fine tune control over USB descriptors such as the string descriptor
- * for the serial number.
- */
#define USB_CFG_DEVICE_CLASS 0
#define USB_CFG_DEVICE_SUBCLASS 0
/* See USB specification if you want to conform to an existing device class.
@@ 337,11 312,11 @@ section at the end of this file).
#define USB_CFG_DESCR_PROPS_DEVICE 0
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
-#define USB_CFG_DESCR_PROPS_STRINGS 0
-#define USB_CFG_DESCR_PROPS_STRING_0 0
-#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
-#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
-#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_STRINGS USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_0 USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER USB_PROP_IS_DYNAMIC
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
//#define USB_CFG_DESCR_PROPS_HID 0
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
M tmk_core/protocol/vusb/vusb.c => tmk_core/protocol/vusb/vusb.c +58 -0
@@ 335,6 335,10 @@ const PROGMEM uchar mouse_extra_hid_report[] = {
};
#endif
+#ifndef SERIAL_NUMBER
+# define SERIAL_NUMBER 0
+#endif
+
#ifndef USB_MAX_POWER_CONSUMPTION
# define USB_MAX_POWER_CONSUMPTION 500
#endif
@@ 344,6 348,40 @@ const PROGMEM uchar mouse_extra_hid_report[] = {
# define USB_POLLING_INTERVAL_MS 1
#endif
+// clang-format off
+const PROGMEM usbStringDescriptor_t usbDescriptorStringZero = {
+ .header = {
+ .bLength = USB_STRING_LEN(1),
+ .bDescriptorType = USBDESCR_STRING
+ },
+ .bString = {0x0409} // US English
+};
+
+const PROGMEM usbStringDescriptor_t usbDescriptorStringManufacturer = {
+ .header = {
+ .bLength = USB_STRING_LEN(sizeof(STR(MANUFACTURER)) - 1),
+ .bDescriptorType = USBDESCR_STRING
+ },
+ .bString = LSTR(MANUFACTURER)
+};
+
+const PROGMEM usbStringDescriptor_t usbDescriptorStringProduct = {
+ .header = {
+ .bLength = USB_STRING_LEN(sizeof(STR(PRODUCT)) - 1),
+ .bDescriptorType = USBDESCR_STRING
+ },
+ .bString = LSTR(PRODUCT)
+};
+
+const PROGMEM usbStringDescriptor_t usbDescriptorStringSerial = {
+ .header = {
+ .bLength = USB_STRING_LEN(sizeof(STR(SERIAL_NUMBER)) - 1),
+ .bDescriptorType = USBDESCR_STRING
+ },
+ .bString = LSTR(SERIAL_NUMBER)
+};
+// clang-format on
+
/*
* Descriptor for compite device: Keyboard + Mouse
*
@@ 457,6 495,26 @@ USB_PUBLIC usbMsgLen_t usbFunctionDescriptor(struct usbRequest *rq) {
len = sizeof(usbDescriptorConfiguration);
break;
#endif
+ case USBDESCR_STRING:
+ switch (rq->wValue.bytes[0]) {
+ case 0:
+ usbMsgPtr = (unsigned char *)&usbDescriptorStringZero;
+ len = usbDescriptorStringZero.header.bLength;
+ break;
+ case 1: // iManufacturer
+ usbMsgPtr = (unsigned char *)&usbDescriptorStringManufacturer;
+ len = usbDescriptorStringManufacturer.header.bLength;
+ break;
+ case 2: // iProduct
+ usbMsgPtr = (unsigned char *)&usbDescriptorStringProduct;
+ len = usbDescriptorStringProduct.header.bLength;
+ break;
+ case 3: // iSerialNumber
+ usbMsgPtr = (unsigned char *)&usbDescriptorStringSerial;
+ len = usbDescriptorStringSerial.header.bLength;
+ break;
+ }
+ break;
case USBDESCR_HID:
switch (rq->wValue.bytes[0]) {
case 0:
M tmk_core/protocol/vusb/vusb.h => tmk_core/protocol/vusb/vusb.h +12 -0
@@ 20,6 20,18 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "host_driver.h"
+typedef struct usbDescriptorHeader {
+ uchar bLength;
+ uchar bDescriptorType;
+} __attribute__((packed)) usbDescriptorHeader_t;
+
+typedef struct usbStringDescriptor {
+ usbDescriptorHeader_t header;
+ int bString[];
+} __attribute__((packed)) usbStringDescriptor_t;
+
+#define USB_STRING_LEN(s) (sizeof(usbDescriptorHeader_t) + ((s) << 1))
+
host_driver_t *vusb_driver(void);
void vusb_transfer_keyboard(void);