A keyboards/cradio/config.h => keyboards/cradio/config.h +83 -0
@@ 0,0 1,83 @@
+/* Copyright 2018-2021
+ * ENDO Katsuhiro <ka2hiro@curlybracket.co.jp>
+ * David Philip Barr <@davidphilipbarr>
+ * Pierre Chevalier <pierrechevalier83@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xC88B
+#define PRODUCT_ID 0x3988
+#define DEVICE_VER 0x0001
+#define MANUFACTURER DPB
+#define PRODUCT Cradio
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 5
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ * NO_DIODE = switches are directly connected to AVR pins
+ *
+*/
+#define DIRECT_PINS { \
+ { E6, F7, F6, F5, F4 }, \
+ { B1, B3, B2, B6, D3 }, \
+ { D1, D0, D4, C6, D7 }, \
+ { B4, B5, NO_PIN, NO_PIN, NO_PIN } \
+}
+
+#define DIRECT_PINS_RIGHT { \
+ { F4, F5, F6, F7, E6 }, \
+ { D3, B6, B2, B3, B1 }, \
+ { D7, C6, D4, D0, D1 }, \
+ { B5, B4, NO_PIN, NO_PIN, NO_PIN } \
+}
+
+#define UNUSED_PINS
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Serial settings */
+#define USE_SERIAL
+/* serial.c configuration for split keyboard */
+#define SOFT_SERIAL_PIN D2
+
+/* Split handedness */
+#define EE_HANDS
+
+/* Top left key on left half */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0
+/* Top right key on right half */
+#define BOOTMAGIC_LITE_ROW_RIGHT 4
+#define BOOTMAGIC_LITE_COLUMN_RIGHT 4
A keyboards/cradio/cradio.c => keyboards/cradio/cradio.c +20 -0
@@ 0,0 1,20 @@
+/* Copyright 2018-2021
+ * ENDO Katsuhiro <ka2hiro@curlybracket.co.jp>
+ * David Philip Barr <@davidphilipbarr>
+ * Pierre Chevalier <pierrechevalier83@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "cradio.h"
A keyboards/cradio/cradio.h => keyboards/cradio/cradio.h +50 -0
@@ 0,0 1,50 @@
+/* Copyright 2018-2021
+ * ENDO Katsuhiro <ka2hiro@curlybracket.co.jp>
+ * David Philip Barr <@davidphilipbarr>
+ * Pierre Chevalier <pierrechevalier83@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+// readability
+#define ___ KC_NO
+
+#define LAYOUT( \
+ L01, L02, L03, L04, L05, R01, R02, R03, R04, R05, \
+ L06, L07, L08, L09, L10, R06, R07, R08, R09, R10, \
+ L11, L12, L13, L14, L15, R11, R12, R13, R14, R15, \
+ L16, L17, R16, R17 \
+ ) \
+ { \
+ { L01, L02, L03, L04, L05 }, \
+ { L06, L07, L08, L09, L10 }, \
+ { L11, L12, L13, L14, L15 }, \
+ { L16, L17, ___, ___, ___ }, \
+ { R01, R02, R03, R04, R05 }, \
+ { R06, R07, R08, R09, R10 }, \
+ { R11, R12, R13, R14, R15 }, \
+ { R16, R17, ___, ___, ___ } \
+ }
+
A keyboards/cradio/info.json => keyboards/cradio/info.json +52 -0
@@ 0,0 1,52 @@
+{
+ "keyboard_name": "Cradio",
+ "url": "https://github.com/davidphilipbarr/Sweep",
+ "maintainer": "@davidphilipbarr",
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {"x": 0, "y": 0.93},
+ {"x": 1, "y": 0.31},
+ {"x": 2, "y": 0},
+ {"x": 3, "y": 0.28},
+ {"x": 4, "y": 0.42},
+
+ {"x": 7, "y": 0.42},
+ {"x": 8, "y": 0.28},
+ {"x": 9, "y": 0},
+ {"x": 10, "y": 0.31},
+ {"x": 11, "y": 0.93},
+
+ {"x": 0, "y": 1.93},
+ {"x": 1, "y": 1.31},
+ {"x": 2, "y": 1},
+ {"x": 3, "y": 1.28},
+ {"x": 4, "y": 1.42},
+
+ {"x": 7, "y": 1.42},
+ {"x": 8, "y": 1.28},
+ {"x": 9, "y": 1},
+ {"x": 10, "y": 1.31},
+ {"x": 11, "y": 1.93},
+
+ {"x": 0, "y": 2.93},
+ {"x": 1, "y": 2.31},
+ {"x": 2, "y": 2},
+ {"x": 3, "y": 2.28},
+ {"x": 4, "y": 2.42},
+
+ {"x": 7, "y": 2.42},
+ {"x": 8, "y": 2.28},
+ {"x": 9, "y": 2},
+ {"x": 10, "y": 2.31},
+ {"x": 11, "y": 2.93},
+
+ {"x": 3.5, "y": 3.75},
+ {"x": 4.5, "y": 4},
+
+ {"x": 6.5, "y": 4},
+ {"x": 7.5, "y": 3.75}
+ ]
+ }
+ }
+}
A keyboards/cradio/keymaps/default/keymap.c => keyboards/cradio/keymaps/default/keymap.c +51 -0
@@ 0,0 1,51 @@
+/* Copyright 2018-2021
+ * ENDO Katsuhiro <ka2hiro@curlybracket.co.jp>
+ * David Philip Barr <@davidphilipbarr>
+ * Pierre Chevalier <pierrechevalier83@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+/* Base layer 0 layout uses home row mods. See the following guide for details:
+ * https://precondition.github.io/home-row-mods
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT(
+ KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
+ SFT_T(KC_A),ALT_T(KC_S),CTL_T(KC_D),GUI_T(KC_F), KC_G, KC_H, GUI_T(KC_J),CTL_T(KC_K),ALT_T(KC_L),SFT_T(KC_SCLN),
+ KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,
+ LT(2,KC_TAB), KC_ENT, KC_SPC, LT(1,KC_BSPC)
+ ),
+ [1] = LAYOUT(
+ _______, KC_1, KC_2, KC_3, KC_VOLU, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_DQUO,
+ _______, KC_4, KC_5, KC_6, KC_VOLD, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_QUOT,
+ KC_CAPS, KC_7, KC_8, KC_9, KC_0, _______, _______, _______, _______, _______,
+ MO(3), KC_GESC, _______, _______
+ ),
+ [2] = LAYOUT(
+ _______, KC_LBRC, KC_LCBR, KC_RCBR, _______, KC_CIRC, KC_LPRN, KC_RPRN, KC_RBRC, KC_TILD,
+ KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_AMPR, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
+ _______, _______, _______, _______, _______, KC_ASTR, KC_UNDS, KC_PLUS, KC_PIPE, _______,
+ _______, _______, KC_DEL, MO(3)
+ ),
+ [3] = LAYOUT(
+ _______, KC_F1, KC_F2, KC_F3, KC_F10, _______, KC_WH_U, KC_WH_D, _______, RESET,
+ _______, KC_F4, KC_F5, KC_F6, KC_F11, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_INS,
+ _______, KC_F7, KC_F8, KC_F9, KC_F12, _______, KC_BTN1, KC_BTN2, _______, _______,
+ _______, _______, _______, _______
+ )
+};
A keyboards/cradio/readme.md => keyboards/cradio/readme.md +33 -0
@@ 0,0 1,33 @@
+# Cradio keyboards
+
+
+
+Cradio are low-profile 34-key split-keyboards designed by [@davidphilipbarr](https://github.com/davidphilipbarr), with no diodes and direct micro-controller pin wiring.
+
+## Keyboard Info
+
+* Keyboard Maintainer: [davidphilipbarr](https://github.com/davidphilipbarr)
+* Hardware Supported:
+ * [Sweep](https://github.com/davidphilipbarr/Sweep)
+ * [Hypergarlic](https://github.com/davidphilipbarr/hypergolic/tree/main/hypergarlic)
+ * Variants of the same 34-key direct pin PCB
+* Hardware Availability: PCBs can be printed with gerber files from the repository
+
+Make examples for this keyboard (after setting up your build environment):
+
+ make cradio:default
+
+Firmware uses `EE_HANDS` split handedness by default. Each halve should be flashed once with the following:
+
+ make cradio:default:dfu-split-left
+ make cradio:default:dfu-split-right
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side.
+* **Physical reset button**: Briefly press the reset button soldered on the PCB.
+* **Keycode in layout**: Press the key mapped to `RESET` if it is configured.
A keyboards/cradio/rules.mk => keyboards/cradio/rules.mk +23 -0
@@ 0,0 1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+UNICODE_ENABLE = yes # Unicode
+AUDIO_ENABLE = no # Audio output
+SPLIT_KEYBOARD = yes # Use shared split_common code
M keyboards/wuque/ikki68_aurora/readme.md => keyboards/wuque/ikki68_aurora/readme.md +1 -1
@@ 19,7 19,7 @@ Flashing example for this keyboard:
To reset the board into bootloader mode, do one of the following:
-* Tap the Reset switch mounted on the PCB
+* Under the **space1** key short the pins on the PCB as shown [here]( https://media.discordapp.net/attachments/768892137205923850/862663262180999218/image0.jpg?width=2520&height=910)
* In the case of the default keymap, use the key combination Fn + PageUp
* Hold the Esc key while connecting the USB cable (also erases persistent settings)