7 files changed, 68 insertions(+), 106 deletions(-)

M keyboards/psuieee/pluto12/config.h
M keyboards/psuieee/pluto12/keymaps/default/keymap.c
A keyboards/psuieee/pluto12/keymaps/wymcg/keymap.c
A keyboards/psuieee/pluto12/keymaps/wymcg/readme.md
M keyboards/psuieee/pluto12/pluto12.c
M keyboards/psuieee/pluto12/pluto12.h
M keyboards/psuieee/pluto12/rules.mk

@@ 1,4 1,4 @@
-// Copyright 2021 Willem McGloughlin (wymcg)
+// Copyright 2021-22 Willem McGloughlin (wymcg)
 // SPDX-License-Identifier: GPL-2.0-or-later
 
 #pragma once


@@ 16,123 16,27 @@
 #define MATRIX_ROWS 3
 #define MATRIX_COLS 4
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
+/* Keyboard Matrix Assignments */
 #define MATRIX_ROW_PINS { D0, D4, C6 }
 #define MATRIX_COL_PINS { D7, E6, B4, B5 }
 #define UNUSED_PINS
 
+/* Encoder Assignments */
+#define ENCODERS_PAD_A { B6 }
+#define ENCODERS_PAD_B { B2 }
+#define ENCODER_RESOLUTION 4
+
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
-//#define LED_NUM_LOCK_PIN B0
-//#define LED_CAPS_LOCK_PIN B1
-//#define LED_SCROLL_LOCK_PIN B2
-//#define LED_COMPOSE_PIN B3
-//#define LED_KANA_PIN B4
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//#    define RGBLED_NUM 16
-//#    define RGBLIGHT_HUE_STEP 8
-//#    define RGBLIGHT_SAT_STEP 8
-//#    define RGBLIGHT_VAL_STEP 8
-//#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== all animations enable ==*/
-//#    define RGBLIGHT_ANIMATIONS
-/*== or choose animations ==*/
-//#    define RGBLIGHT_EFFECT_BREATHING
-//#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//#    define RGBLIGHT_EFFECT_SNAKE
-//#    define RGBLIGHT_EFFECT_KNIGHT
-//#    define RGBLIGHT_EFFECT_CHRISTMAS
-//#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//#    define RGBLIGHT_EFFECT_RGB_TEST
-//#    define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-//#endif
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
 /* disable these deprecated features by default */
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0

@@ 1,4 1,4 @@
-// Copyright 2021 Will McGLoughlin (wymcg)
+// Copyright 2021-22 Will McGLoughlin (wymcg)
 // SPDX-License-Identifier: GPL-2.0-or-later
 
 #include QMK_KEYBOARD_H

@@ 0,0 1,56 @@
+// Copyright 2021-22 Will McGLoughlin (wymcg)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _NAV,
+    _PROD
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT(
+    KC_MUTE,    KC_MPRV,    KC_MPLY,    KC_MNXT,
+    TO(_NAV),   G(KC_1),    G(KC_2),    G(KC_3),
+    TO(_PROD),  G(KC_4),    G(KC_5),    G(KC_6)
+  ),
+  [_NAV] = LAYOUT(
+    TO(_BASE),  KC_HOME,    KC_UP,      KC_END,
+    A(KC_TAB),  KC_LEFT,    KC_DOWN,    KC_RIGHT,
+    G(KC_TAB),  KC_PGDN,    KC_PGUP,    MO(_BASE)
+  ),
+  [_PROD] = LAYOUT(
+    TO(_BASE),  KC_NO,      KC_NO,      KC_NO,
+    C(KC_Z),    C(KC_X),    C(KC_C),    C(KC_V),
+    C(KC_A),    C(KC_LEFT), C(KC_RIGHT),MO(_BASE)
+  )
+};
+
+bool encoder_update_user(uint8_t index, bool clockwise) {
+    switch (biton32(layer_state)) {
+        case _BASE:
+            if (clockwise) {
+                tap_code(KC_VOLU);
+            } else {
+                tap_code(KC_VOLD);
+            }
+            break;
+        case _NAV:
+            if (clockwise) {
+                tap_code16(C(G(KC_RIGHT)));
+            } else {
+                tap_code16(C(G(KC_LEFT)));
+            }
+            break;
+        case _PROD:
+            if (clockwise) {
+                tap_code16(C(KC_Y));
+            } else {
+                tap_code16(C(KC_Z));
+            }
+            break;
+    }
+    return false;
+}

@@ 0,0 1,1 @@
+# wymcg's custom keymap

@@ 1,4 1,4 @@
-// Copyright 2021 Will McGloughlin (@wymcg)
+// Copyright 2021-22 Will McGloughlin (@wymcg)
 // SPDX-License-Identifier: GPL-2.0-or-later
 
 #include "pluto12.h"

@@ 1,4 1,4 @@
-// Copyright 2021 Will McGloughlin (@wymcg)
+// Copyright 2021-22 Will McGloughlin (@wymcg)
 // SPDX-License-Identifier: GPL-2.0-or-later
 
 #pragma once

@@ 16,3 16,4 @@ NKRO_ENABLE = no            # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
+ENCODER_ENABLE = yes