M keyboard/atreus/Makefile => keyboard/atreus/Makefile +15 -2
@@ 58,6 58,10 @@ else
SRC := keymaps/keymap_default.c $(SRC)
endif
+ifdef ASTAR
+ OPT_DEFS += -DATREUS_ASTAR
+endif
+
CONFIG_H = config.h
# MCU name
@@ 114,8 118,8 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
# comment out to disable the options.
#
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-#MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-#EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ 137,3 141,12 @@ VPATH += $(TMK_DIR)
include $(TOP_DIR)/quantum/quantum.mk
+USB ?= /dev/cu.usbmodem1411
+
+upload: build
+ifdef ASTAR
+ while [ ! -r $(USB) ]; do sleep 1; done; \
+ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
+else
+ teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
+endif
M keyboard/atreus/README.md => keyboard/atreus/README.md +6 -4
@@ 1,10 1,6 @@
atreus keyboard firmware
======================
-## Note
-
-This is for the Teensy2 hand wired boards only.
-
## Quantum MK Firmware
You have access to a bunch of goodies! Check out the Makefile to enable/disable some of the features. Uncomment the `#` to enable them. Setting them to `no` does nothing and will only confuse future you.
@@ 14,6 10,12 @@ You have access to a bunch of goodies! Check out the Makefile to enable/disable
# UNICODE_ENABLE = yes # Unicode support - this is commented out, just as an example. You have to use #, not //
BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
+## Atreus specific information
+
+These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in two variants: one powered by a Teensy 2, one powered by an A-Star. This repository currently assumes that you have a Teensy 2 powered Atreus. If you are using an A-Star, specify that by adding `ASTAR=yes` to your `make` commands.
+
+If you are coming from the [atreus-firmware](https://github.com/technomancy/atreus-firmware), we've also brought forward the `make upload` command for you to use.
+
## Quick aliases to common actions
Your keymap can include shortcuts to common operations (called "function actions" in tmk).
M keyboard/atreus/atreus.h => keyboard/atreus/atreus.h +9 -10
@@ 7,21 7,20 @@
#include <stddef.h>
// This a shortcut to help you visually see your layout.
-// The following is an example using the Planck MIT layout
// The first section contains all of the arguements
// The second converts the arguments into a two-dimensional array
#define KEYMAP( \
- k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
- k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
- k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
- k30, k31, k32, k33, k34, k35, k37, k38, k39, k3a, k3b \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a \
) \
{ \
- { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
- { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
- { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
- { k30, k31, k32, k33, k34, k35, k35, k37, k38, k39, k3a, k3b } \
-}
+ { k00, k01, k02, k03, k04, KC_NO, k05, k06, k07, k08, k09 }, \
+ { k10, k11, k12, k13, k14, KC_NO, k15, k16, k17, k18, k19 }, \
+ { k20, k21, k22, k23, k24, k35, k25, k26, k27, k28, k29 }, \
+ { k2a, k30, k31, k32, k33, k34, k36, k37, k38, k39, k3a } \
+}
void * matrix_init_user(void);
void * matrix_scan_user(void);
M keyboard/atreus/config.h => keyboard/atreus/config.h +7 -3
@@ 33,11 33,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROWS 4
#define MATRIX_COLS 11
-// Planck PCB default pin-out
// Change this to how you wired your keyboard
// COLS: Left to right, ROWS: Top to bottom
-#define COLS (int []){ F6, F5, F4, B7, B6, B5, B4, B3, B2, B1, B0}
-#define ROWS (int []){ D0, D1, D2, D3 }
+#ifdef ATREUS_ASTAR
+ #define COLS (int []){ B7, D6, F7, F6, B6, D4, E6, B4, B5, C6, D7 }
+ #define ROWS (int []){ D0, D1, D3, D2 }
+#else
+ #define COLS (int []){ F6, F5, F4, B7, B6, B5, B4, B3, B2, B1, B0}
+ #define ROWS (int []){ D0, D1, D2, D3 }
+#endif
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
A keyboard/atreus/keymaps/keymap_gerb.c => keyboard/atreus/keymaps/keymap_gerb.c +66 -0
@@ 0,0 1,66 @@
+// This is the personal keymap of Chris Gerber (@gerbercj). I haven't worked out the kinks
+// with the Colemak and Dvorak support yet, but everything else works nicely.
+
+#include "atreus.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QW 0
+#define _CM 1
+#define _DV 2
+#define _L1 3
+#define _L2 4
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_QW] = { /* Qwerty */
+ {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_NO, KC_Y, KC_U, KC_I, KC_O, KC_P },
+ {KC_A, KC_S, KC_D, KC_F, KC_G, KC_NO, KC_H, KC_J, KC_K, KC_L, KC_SCLN},
+ {KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LALT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH},
+ {KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT }
+ },
+ [_CM] = { /* Colemak */
+ {KC_Q, KC_W, KC_F, KC_P, KC_G, KC_NO, KC_J, KC_L, KC_U, KC_Y, KC_SCLN},
+ {KC_A, KC_R, KC_S, KC_T, KC_D, KC_NO, KC_H, KC_N, KC_E, KC_I, KC_O },
+ {KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LALT, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH},
+ {KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT }
+ },
+ [_DV] = { /* Dvorak */
+ {KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_NO, KC_F, KC_G, KC_C, KC_R, KC_L },
+ {KC_A, KC_O, KC_E, KC_U, KC_I, KC_NO, KC_D, KC_H, KC_T, KC_N, KC_S },
+ {KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_LALT, KC_B, KC_M, KC_W, KC_V, KC_Z },
+ {KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC, MO(_L1), KC_MINS, KC_SLSH, KC_ENT }
+ },
+ [_L1] = { /* LAYER 1 */
+ {KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_NO, KC_VOLU, KC_7, KC_8, KC_9, KC_LBRC},
+ {KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_NO, KC_VOLD, KC_4, KC_5, KC_6, KC_RBRC},
+ {KC_GRV, KC_MPRV, KC_MPLY, KC_MNXT, KC_MINS, KC_LALT, KC_MUTE, KC_1, KC_2, KC_3, KC_BSLS},
+ {TG(_L2), KC_APP, KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC, KC_TRNS, KC_DOT, KC_0, KC_EQL }
+ },
+ [_L2] = { /* LAYER 2 */
+ {KC_TRNS, KC_WH_L, KC_MS_U, KC_WH_R, KC_WH_U, KC_NO, DF(_QW), KC_F7, KC_F8, KC_F9, KC_F10 },
+ {KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, KC_NO, DF(_CM), KC_F6, KC_F5, KC_F6, KC_F11 },
+ {KC_BTN4, KC_BTN1, KC_BTN2, KC_BTN3, KC_BTN4, KC_LALT, DF(_DV), KC_F1, KC_F2, KC_F3, KC_F12 },
+ {KC_TRNS, KC_TRNS, KC_LGUI, KC_LSFT, KC_BSPC, KC_RCTL, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, RESET }
+ }
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
M quantum/keymap_common.c => quantum/keymap_common.c +3 -0
@@ 91,6 91,9 @@ action_t action_for_key(uint8_t layer, keypos_t key)
play_notes(&goodbye, 5, false);
#endif
_delay_ms(250);
+ #ifdef ATREUS_ASTAR
+ *(uint16_t *)0x0800 = 0x7777; // these two are a-star-specific
+ #endif
bootloader_jump();
return;
} else if (keycode == DEBUG) { // DEBUG is 0x5001