Add serialmouser_usb project
8 files changed, 580 insertions(+), 0 deletions(-) A converter/serialmouse_usb/Makefile A converter/serialmouse_usb/README.md A converter/serialmouse_usb/config.h A converter/serialmouse_usb/keymap.c A converter/serialmouse_usb/keymap_common.c A converter/serialmouse_usb/keymap_common.h A converter/serialmouse_usb/led.c A converter/serialmouse_usb/matrix.c
A converter/serialmouse_usb/Makefile => converter/serialmouse_usb/Makefile +106 -0
@@ 0,0 1,106 @@ # # Makefile for Teensy # # Target file name (without extension). TARGET = serialmouse_usb # Directory common source filess exist TOP_DIR = ../.. # Directory keyboard dependent files exist TARGET_DIR = . # project specific files SRC = keymap.c \ matrix.c \ led.c CONFIG_H = config.h # MCU name #MCU = at90usb1287 MCU = atmega32u4 # Processor frequency. # This will define a symbol, F_CPU, in all source code files equal to the # processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # # This will be an integer division of F_USB below, as it is sourced by # F_USB after it has run through any CPU prescalers. Note that this value # does not *change* the processor frequency - it should merely be updated to # reflect the processor speed set externally so that the code can use accurate # software delays. F_CPU = 16000000 # # LUFA specific # # Target architecture (see library "Board Types" documentation). ARCH = AVR8 # Input clock frequency. # This will define a symbol, F_USB, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' # at the end, this will be done automatically to create a 32-bit value in your # source code. # # If no clock division is performed on the input clock inside the AVR (via the # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) # Interrupt driven control endpoint task(+60) #OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT # Boot Section Size in *bytes* # Teensy halfKay 512 # Teensy++ halfKay 1024 # Atmel DFU loader 4096 # LUFA bootloader 4096 # USBaspLoader 2048 OPT_DEFS += -DBOOTLOADER_SIZE=512 # Build Options # comment out to disable the options. # #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) #MOUSEKEY_ENABLE = yes # Mouse keys(+4700) #EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) #COMMAND_ENABLE = yes # Commands for debug and configuration #NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA # Serial Mouse Options # You can choose a mouse protocol and the implementation of # the underlying serial connection. # SERIAL_MOUSE_MICROSOFT_ENABLE = yes # Enable support for Microsoft-compatible mice #SERIAL_MOUSE_MOUSESYSTEMS_ENABLE = yes # Enable support for Mousesystems-compatible mice #SERIAL_MOUSE_USE_UART = yes # use hardware UART for serial connection SERIAL_MOUSE_USE_SOFT = yes # use software serial implementation # Optional serial mouse driver features # Support scrolling while holding the middle mouse button # (currently only supported for Mousesystems mice): #OPT_DEFS += -DSERIAL_MOUSE_CENTER_SCROLL # Optimize size but this may cause error "relocation truncated to fit" #EXTRALDFLAGS = -Wl,--relax # Search Path VPATH += $(TARGET_DIR) VPATH += $(TOP_DIR) include $(TOP_DIR)/protocol.mk include $(TOP_DIR)/protocol/lufa.mk include $(TOP_DIR)/common.mk include $(TOP_DIR)/rules.mk
A converter/serialmouse_usb/README.md => converter/serialmouse_usb/README.md +11 -0
@@ 0,0 1,11 @@ Serial mouse converter ====================== See https://github.com/tmk/tmk_keyboard/pull/131 Supported protocols ------------------- ### Microsoft Not tested. ### Mousesystems
A converter/serialmouse_usb/config.h => converter/serialmouse_usb/config.h +119 -0
@@ 0,0 1,119 @@ /* Copyright 2012 Jun Wako <wakojun@gmail.com> This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef CONFIG_H #define CONFIG_H #include <avr/interrupt.h> #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x2222 #define DEVICE_VER 0x0001 #define MANUFACTURER t.m.k. #define PRODUCT serial mouse converter #define DESCRIPTION convert serial mouse into USB /* matrix size */ #define MATRIX_ROWS 0 #define MATRIX_COLS 0 /* key combination for command */ #define IS_COMMAND() false #ifdef SERIAL_MOUSE_MICROSOFT /* * Serial(USART) configuration (for Microsoft serial mice) * asynchronous, positive logic, 1200baud, bit order: LSB first * 1-start bit, 7-data bit, no parity, 1-stop bit */ #define SERIAL_UART_BAUD 1200 #define SERIAL_UART_DATA UDR1 #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1) #define SERIAL_UART_RXD_VECT USART1_RX_vect #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1)) #define SERIAL_UART_INIT() do { \ UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \ UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \ UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \ UCSR1C = (1<<UCSZ11) | (0<<UCSZ10); /* no parity, 1 stop bit, 7-bit characters */ \ sei(); \ } while(0) // for Microsoft mouse protocol /* Serial(USART) configuration * asynchronous, negative logic, 1200baud, no flow control * 1-start bit, 7-data bit, non parity, 1-stop bit */ #define SERIAL_SOFT_BAUD 1200 #define SERIAL_SOFT_DATA_7BIT #define SERIAL_SOFT_PARITY_NONE #define SERIAL_SOFT_BIT_ORDER_LSB #define SERIAL_SOFT_LOGIC_NEGATIVE /* RXD Port */ #define SERIAL_SOFT_RXD_DDR DDRD #define SERIAL_SOFT_RXD_PORT PORTD #define SERIAL_SOFT_RXD_PIN PIND #define SERIAL_SOFT_RXD_BIT 2 #define SERIAL_SOFT_RXD_VECT INT2_vect /* RXD Interupt */ #define SERIAL_SOFT_RXD_INIT() do { \ /* pin configuration: input with pull-up */ \ SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \ SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \ /* enable interrupt: INT2(rising edge) */ \ EICRA |= ((1<<ISC21)|(1<<ISC20)); \ EIMSK |= (1<<INT2); \ sei(); \ } while (0) #define SERIAL_SOFT_RXD_INT_ENTER() #define SERIAL_SOFT_RXD_INT_EXIT() do { \ /* clear interrupt flag */ \ EIFR = (1<<INTF2); \ } while (0) #define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT)) /* TXD Port */ #define SERIAL_SOFT_TXD_HI() #define SERIAL_SOFT_TXD_LO() #define SERIAL_SOFT_TXD_INIT() #elif defined(SERIAL_MOUSE_MOUSESYSTEMS) /* * Serial(USART) configuration (for Mousesystems serial mice) * asynchronous, positive logic, 1200baud, bit order: LSB first * 1-start bit, 8-data bit, no parity, 1-stop bit */ #define SERIAL_UART_BAUD 1200 #define SERIAL_UART_DATA UDR1 #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1) #define SERIAL_UART_RXD_VECT USART1_RX_vect #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1)) #define SERIAL_UART_INIT() do { \ UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \ UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \ UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \ UCSR1C = (1<<UCSZ11) | (1<<UCSZ10); /* no parity, 1 stop bit, 8-bit characters */ \ sei(); \ } while(0) #endif #endif
A converter/serialmouse_usb/keymap.c => converter/serialmouse_usb/keymap.c +33 -0
@@ 0,0 1,33 @@ /* Copyright 2011,2012,2013 Jun Wako <wakojun@gmail.com> This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <stdint.h> #include <stdbool.h> #include "keymap.h" /* translates key to keycode */ uint8_t keymap_key_to_keycode(uint8_t layer, key_t key) { return KC_NO; } /* translates Fn keycode to action */ action_t keymap_fn_to_action(uint8_t keycode) { return (action_t){}; }
A converter/serialmouse_usb/keymap_common.c => converter/serialmouse_usb/keymap_common.c +30 -0
@@ 0,0 1,30 @@ /* Copyright 2011,2012,2013 Jun Wako <wakojun@gmail.com> This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "keymap_common.h" /* translates key to keycode */ uint8_t keymap_key_to_keycode(uint8_t layer, key_t key) { return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); } /* translates Fn keycode to action */ action_t keymap_fn_to_action(uint8_t keycode) { return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) }; }
A converter/serialmouse_usb/keymap_common.h => converter/serialmouse_usb/keymap_common.h +174 -0
@@ 0,0 1,174 @@ /* Copyright 2011,2012,2013 Jun Wako <wakojun@gmail.com> This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef KEYMAP_COMMON_H #define KEYMAP_COMMON_H #include <stdint.h> #include <stdbool.h> #include <avr/pgmspace.h> #include "keycode.h" #include "action.h" #include "action_macro.h" #include "report.h" #include "print.h" #include "debug.h" #include "keymap.h" // 32*8(256) byte array which converts PS/2 code into USB code extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; extern const uint16_t fn_actions[]; /* All keys */ #define KEYMAP_ALL( \ K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \ K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \ K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \ \ K61, /* for European ISO */ \ K51, K13, K6A, K64, K67, /* for Japanese JIS */ \ K08, K10, K18, K20, K28, K30, K38, K40, K48, K50, K57, K5F, /* F13-24 */ \ KB7, KBF, KDE, /* System Power, Sleep, Wake */ \ KA3, KB2, KA1, /* Mute, Volume Up, Volume Down */ \ KCD, K95, KBB, KB4, KD0, /* Next, Previous, Stop, Pause, Media Select */ \ KC8, KAB, KC0, /* Mail, Calculator, My Computer */ \ K90, KBA, KB8, KB0, /* WWW Search, Home, Back, Forward */ \ KA8, KA0, K98 /* WWW Stop, Refresh, Favorites */ \ ) { \ { KC_NO, KC_##K01, KC_NO, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_NO }, \ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_NO }, \ { KC_##K18, KC_NO, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_NO }, \ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO }, \ { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_NO }, \ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_NO }, \ { KC_##K38, KC_NO, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_NO }, \ { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_NO }, \ { KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_NO }, \ { KC_##K50, KC_##K51, KC_##K52, KC_NO, KC_##K54, KC_##K55, KC_NO, KC_##K57 }, \ { KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_NO, KC_##K5D, KC_NO, KC_##K5F }, \ { KC_NO, KC_##K61, KC_NO, KC_NO, KC_##K64, KC_NO, KC_##K66, KC_##K67 }, \ { KC_NO, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_NO, KC_NO, KC_NO }, \ { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \ { KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_##K7C, KC_##K7D, KC_##K7E, KC_NO }, \ { KC_NO, KC_NO, KC_NO, KC_##K83, KC_NO, KC_NO, KC_NO, KC_NO }, \ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ { KC_##K90, KC_##K91, KC_NO, KC_NO, KC_##K94, KC_##K95, KC_NO, KC_NO }, \ { KC_##K98, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K9F }, \ { KC_##KA0, KC_##KA1, KC_NO, KC_##KA3, KC_NO, KC_NO, KC_NO, KC_##KA7 }, \ { KC_##KA8, KC_NO, KC_NO, KC_##KAB, KC_NO, KC_NO, KC_NO, KC_##KAF }, \ { KC_##KB0, KC_NO, KC_##KB2, KC_NO, KC_##KB4, KC_NO, KC_NO, KC_##KB7 }, \ { KC_##KB8, KC_NO, KC_##KBA, KC_##KBB, KC_NO, KC_NO, KC_NO, KC_##KBF }, \ { KC_##KC0, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ { KC_##KC8, KC_NO, KC_##KCA, KC_NO, KC_NO, KC_##KCD, KC_NO, KC_NO }, \ { KC_##KD0, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ { KC_NO, KC_NO, KC_##KDA, KC_NO, KC_NO, KC_NO, KC_##KDE, KC_NO }, \ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ { KC_NO, KC_##KE9, KC_NO, KC_##KEB, KC_##KEC, KC_NO, KC_NO, KC_NO }, \ { KC_##KF0, KC_##KF1, KC_##KF2, KC_NO, KC_##KF4, KC_##KF5, KC_NO, KC_NO }, \ { KC_NO, KC_NO, KC_##KFA, KC_NO, KC_##KFC, KC_##KFD, KC_##KFE, KC_NO }, \ } /* US layout */ #define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layout */ #define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layout */ #define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endif
A converter/serialmouse_usb/led.c => converter/serialmouse_usb/led.c +24 -0
@@ 0,0 1,24 @@ /* Copyright 2011 Jun Wako <wakojun@gmail.com> This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "stdint.h" #include "led.h" void led_set(uint8_t usb_led) { }
A converter/serialmouse_usb/matrix.c => converter/serialmouse_usb/matrix.c +83 -0
@@ 0,0 1,83 @@ /* Copyright 2011 Jun Wako <wakojun@gmail.com> This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <stdint.h> #include <stdbool.h> #include <avr/io.h> #include <util/delay.h> #include "action.h" #include "print.h" #include "util.h" #include "debug.h" #include "matrix.h" inline uint8_t matrix_rows(void) { return MATRIX_ROWS; } inline uint8_t matrix_cols(void) { return MATRIX_COLS; } void matrix_init(void) { debug_enable = true; debug_mouse=true; return; } uint8_t matrix_scan(void) { return 0; } bool matrix_is_modified(void) { return false; } inline bool matrix_has_ghost(void) { return false; } inline bool matrix_is_on(uint8_t row, uint8_t col) { return false; } inline uint8_t matrix_get_row(uint8_t row) { return 0; } void matrix_print(void) { } uint8_t matrix_key_count(void) { return 0; }