M keyboards/ai03/orbit/config.h => keyboards/ai03/orbit/config.h +0 -3
@@ 19,9 19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define SELECT_SOFT_SERIAL_SPEED 1
-#define SPLIT_LED_STATE_ENABLE
-#define SPLIT_LAYER_STATE_ENABLE
-
#define SPLIT_HAND_PIN D5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
M keyboards/ai03/orbit/info.json => keyboards/ai03/orbit/info.json +6 -0
@@ 23,6 23,12 @@
"cols": ["D4", "D6", "F1", "F0", "F4", "F5", "C6"],
"rows": ["B6", "B5", "B4", "D7", "E6"]
}
+ },
+ "transport":{
+ "sync" :{
+ "indicators": true,
+ "layer_state": true
+ }
}
},
"processor": "atmega32u4",
M keyboards/boardsource/unicorne/config.h => keyboards/boardsource/unicorne/config.h +0 -2
@@ 8,8 8,6 @@
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
-#define SPLIT_LAYER_STATE_ENABLE
-
#define I2C_DRIVER I2CD1
#define I2C1_SDA_PIN GP22
#define I2C1_SCL_PIN GP23
M keyboards/boardsource/unicorne/info.json => keyboards/boardsource/unicorne/info.json +6 -1
@@ 20,7 20,12 @@
},
"split": {
"enabled": true,
- "soft_serial_pin": "GP0"
+ "soft_serial_pin": "GP0",
+ "transport": {
+ "sync": {
+ "layer_state": true
+ }
+ }
},
"usb": {
"device_version": "1.0.0",
M keyboards/buzzard/rev1/config.h => keyboards/buzzard/rev1/config.h +0 -1
@@ 10,7 10,6 @@
#ifdef OLED_ENABLE
#define OLED_DISPLAY_128X32
-#define SPLIT_OLED_ENABLE
#endif
#ifdef PS2_DRIVER_INTERRUPT
M keyboards/buzzard/rev1/info.json => keyboards/buzzard/rev1/info.json +6 -1
@@ 14,7 14,12 @@
},
"diode_direction": "COL2ROW",
"split": {
- "soft_serial_pin": "D2"
+ "soft_serial_pin": "D2",
+ "transport": {
+ "sync": {
+ "oled": true
+ }
+ }
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/clickety_split/leeloo/rev2/info.json => keyboards/clickety_split/leeloo/rev2/info.json +3 -1
@@ 8,7 8,9 @@
},
"split": {
"transport": {
- "sync_matrix_state": true
+ "sync" :{
+ "matrix_state": true
+ }
}
},
"rgblight": {
M keyboards/clickety_split/leeloo/rev3/info.json => keyboards/clickety_split/leeloo/rev3/info.json +4 -2
@@ 7,9 7,11 @@
"rgb_matrix": true
},
"split": {
- "transport": {
- "sync_matrix_state": true
+ "transport": {
+ "sync" :{
+ "matrix_state": true
}
+ }
},
"rgblight": {
"led_count": 58,
M keyboards/controllerworks/mini36/config.h => keyboards/controllerworks/mini36/config.h +0 -5
@@ 22,11 22,6 @@
#define RGB_MATRIX_SPLIT \
{ 24, 24 }
-#define SPLIT_TRANSPORT_MIRROR
-#define SPLIT_LAYER_STATE_ENABLE
-#define SPLIT_LED_STATE_ENABLE
-#define SPLIT_MODS_ENABLE
-
#define I2C_DRIVER I2CD0
#define I2C1_SCL_PIN GP25
#define I2C1_SDA_PIN GP24
M keyboards/controllerworks/mini36/info.json => keyboards/controllerworks/mini36/info.json +7 -1
@@ 41,7 41,13 @@
},
"soft_serial_pin": "GP1",
"transport": {
- "protocol": "serial"
+ "protocol": "serial",
+ "sync": {
+ "indicators": true,
+ "layer_state": true,
+ "matrix_state": true,
+ "modifiers": true
+ }
}
},
"features": {
M keyboards/controllerworks/mini42/config.h => keyboards/controllerworks/mini42/config.h +0 -5
@@ 20,11 20,6 @@
#define WS2812_PIO_USE_PIO1
#define RGB_MATRIX_LED_COUNT 54
-#define SPLIT_TRANSPORT_MIRROR
-#define SPLIT_LAYER_STATE_ENABLE
-#define SPLIT_LED_STATE_ENABLE
-#define SPLIT_MODS_ENABLE
-
#undef I2C_DRIVER
#define I2C_DRIVER I2CD0
#undef I2C1_SCL_PIN
M keyboards/controllerworks/mini42/info.json => keyboards/controllerworks/mini42/info.json +7 -1
@@ 42,7 42,13 @@
},
"soft_serial_pin": "GP1",
"transport": {
- "protocol": "serial"
+ "protocol": "serial",
+ "sync": {
+ "indicators": true,
+ "layer_state": true,
+ "matrix_state": true,
+ "modifiers": true
+ }
}
},
"features": {
M keyboards/handwired/tsubasa/config.h => keyboards/handwired/tsubasa/config.h +0 -3
@@ 17,6 17,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
#define MASTER_RIGHT
-
-#define SPLIT_WPM_ENABLE
-#define SPLIT_LAYER_STATE_ENABLE
M keyboards/handwired/tsubasa/info.json => keyboards/handwired/tsubasa/info.json +6 -0
@@ 38,6 38,12 @@
{"pin_a": "F4", "pin_b": "F5"}
]
}
+ },
+ "transport": {
+ "sync": {
+ "layer_state": true,
+ "wpm": true
+ }
}
},
"layouts": {
M keyboards/helix/rev2/config.h => keyboards/helix/rev2/config.h +0 -3
@@ 21,9 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define QUICK_TAP_TERM 0
-#define SPLIT_LAYER_STATE_ENABLE
-#define SPLIT_LED_STATE_ENABLE
-
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
M keyboards/helix/rev2/info.json => keyboards/helix/rev2/info.json +7 -1
@@ 14,7 14,13 @@
},
"diode_direction": "COL2ROW",
"split": {
- "soft_serial_pin": "D2"
+ "soft_serial_pin": "D2",
+ "transport": {
+ "sync": {
+ "indicators": true,
+ "layer_state": true
+ }
+ }
},
"tapping": {
"term": 100
M keyboards/hotdox76v2/config.h => keyboards/hotdox76v2/config.h +0 -5
@@ 30,11 30,6 @@
#define RGB_MATRIX_CENTER \
{ 112, 32 }
-#define SPLIT_TRANSPORT_MIRROR
-#define SPLIT_MODS_ENABLE
-#define SPLIT_LAYER_STATE_ENABLE
-#define SPLIT_LED_STATE_ENABLE
-#define SPLIT_OLED_ENABLE
#define SPLIT_TRANSACTION_IDS_KB KEYBOARD_CURRENT_ALPA_SYNC
#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
M keyboards/hotdox76v2/info.json => keyboards/hotdox76v2/info.json +10 -1
@@ 27,7 27,16 @@
},
"split": {
"enabled": true,
- "soft_serial_pin": "D2"
+ "soft_serial_pin": "D2",
+ "transport": {
+ "sync": {
+ "indicators": true,
+ "layer_state": true,
+ "matrix_state": true,
+ "modifiers": true,
+ "oled": true
+ }
+ }
},
"ws2812": {
"pin": "D3"
M keyboards/jorne/rev1/config.h => keyboards/jorne/rev1/config.h +0 -2
@@ 7,5 7,3 @@
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-#define SPLIT_LAYER_STATE_ENABLE
-#define SPLIT_LED_STATE_ENABLE
M keyboards/jorne/rev1/info.json => keyboards/jorne/rev1/info.json +7 -1
@@ 14,7 14,13 @@
},
"diode_direction": "COL2ROW",
"split": {
- "soft_serial_pin": "D2"
+ "soft_serial_pin": "D2",
+ "transport": {
+ "sync": {
+ "indicators": true,
+ "layer_state": true
+ }
+ }
},
"rgblight": {
"led_count": 56,
M keyboards/kapl/rev1/config.h => keyboards/kapl/rev1/config.h +0 -4
@@ 8,7 8,6 @@
#define RGB_MATRIX_LED_COUNT 88
#define RGB_MATRIX_SPLIT { 44, 44 }
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-#define SPLIT_TRANSPORT_MIRROR
#ifdef RGB_MATRIX_ENABLE
// EFFECTS
@@ 41,6 40,3 @@
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-
-#define SPLIT_LAYER_STATE_ENABLE
-#define SPLIT_LED_STATE_ENABLE
M keyboards/kapl/rev1/info.json => keyboards/kapl/rev1/info.json +8 -1
@@ 36,7 36,14 @@
},
"diode_direction": "COL2ROW",
"split": {
- "soft_serial_pin": "D2"
+ "soft_serial_pin": "D2",
+ "transport": {
+ "sync": {
+ "indicators": true,
+ "layer_state": true,
+ "matrix_state": true
+ }
+ }
},
"processor": "atmega32u4",
"bootloader": "caterina",
M keyboards/keebio/iris/rev8/info.json => keyboards/keebio/iris/rev8/info.json +3 -1
@@ 31,7 31,9 @@
}
},
"transport": {
- "sync_matrix_state": true
+ "sync" :{
+ "matrix_state": true
+ }
}
},
"processor": "RP2040",
M keyboards/keebio/nyquist/rev4/info.json => keyboards/keebio/nyquist/rev4/info.json +3 -1
@@ 28,7 28,9 @@
}
},
"transport": {
- "sync_matrix_state": true
+ "sync" :{
+ "matrix_state": true
+ }
}
},
"matrix_pins": {
M keyboards/keebio/sinc/rev1/config.h => keyboards/keebio/sinc/rev1/config.h +0 -2
@@ 23,8 23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* Synchronize Caps Lock LED across halves */
-#define SPLIT_LED_STATE_ENABLE
#define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2)
M keyboards/keebio/sinc/rev1/info.json => keyboards/keebio/sinc/rev1/info.json +4 -1
@@ 18,7 18,10 @@
"enabled": true,
"soft_serial_pin": "D0",
"transport": {
- "protocol": "serial"
+ "protocol": "serial",
+ "sync" :{
+ "indicators": true
+ }
},
"encoder": {
"right": {
M keyboards/keebio/sinc/rev2/config.h => keyboards/keebio/sinc/rev2/config.h +0 -2
@@ 23,8 23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* Synchronize Caps Lock LED across halves */
-#define SPLIT_LED_STATE_ENABLE
#define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2)
M keyboards/keebio/sinc/rev2/info.json => keyboards/keebio/sinc/rev2/info.json +4 -1
@@ 18,7 18,10 @@
"enabled": true,
"soft_serial_pin": "D0",
"transport": {
- "protocol": "serial"
+ "protocol": "serial",
+ "sync" :{
+ "indicators": true
+ }
},
"encoder": {
"right": {
M keyboards/keychron/q11/info.json => keyboards/keychron/q11/info.json +3 -1
@@ 44,7 44,9 @@
},
"transport": {
"protocol": "serial_usart",
- "sync_matrix_state": true
+ "sync" :{
+ "matrix_state": true
+ }
},
"bootmagic": {
"matrix": [6, 7]
M keyboards/lime/rev1/config.h => keyboards/lime/rev1/config.h +0 -5
@@ 24,8 24,3 @@
#endif
#define SPLIT_USB_DETECT
-
-#ifdef WPM_ENABLE
-# define SPLIT_WPM_ENABLE
-#endif
-
M keyboards/lime/rev1/info.json => keyboards/lime/rev1/info.json +5 -0
@@ 26,6 26,11 @@
{"pin_a": "F4", "pin_b": "F5", "resolution": 2}
]
}
+ },
+ "transport": {
+ "sync": {
+ "wpm": true
+ }
}
},
"tapping": {
M keyboards/mechwild/mokulua/mirrored/config.h => keyboards/mechwild/mokulua/mirrored/config.h +0 -4
@@ 7,10 7,6 @@
#define MASTER_LEFT
//#define MASTER_RIGHT
-#define SPLIT_LAYER_STATE_ENABLE
-#define SPLIT_LED_STATE_ENABLE
-#define SPLIT_MODS_ENABLE
-#define SPLIT_OLED_ENABLE
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/mechwild/mokulua/mirrored/info.json => keyboards/mechwild/mokulua/mirrored/info.json +9 -1
@@ 22,7 22,15 @@
"tap_keycode_delay": 10
},
"split": {
- "soft_serial_pin": "D3"
+ "soft_serial_pin": "D3",
+ "transport": {
+ "sync": {
+ "indicators": true,
+ "layer_state": true,
+ "modifiers": true,
+ "oled": true
+ }
+ }
},
"rgblight": {
"saturation_steps": 8,
M keyboards/mechwild/mokulua/standard/config.h => keyboards/mechwild/mokulua/standard/config.h +0 -4
@@ 7,10 7,6 @@
#define MASTER_LEFT
//#define MASTER_RIGHT
-#define SPLIT_LAYER_STATE_ENABLE
-#define SPLIT_LED_STATE_ENABLE
-#define SPLIT_MODS_ENABLE
-#define SPLIT_OLED_ENABLE
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/mechwild/mokulua/standard/info.json => keyboards/mechwild/mokulua/standard/info.json +9 -1
@@ 22,7 22,15 @@
"tap_keycode_delay": 10
},
"split": {
- "soft_serial_pin": "D3"
+ "soft_serial_pin": "D3",
+ "transport": {
+ "sync": {
+ "indicators": true,
+ "layer_state": true,
+ "modifiers": true,
+ "oled": true
+ }
+ }
},
"rgblight": {
"saturation_steps": 8,
M keyboards/mlego/m60_split/rev1/config.h => keyboards/mlego/m60_split/rev1/config.h +0 -4
@@ 15,10 15,6 @@
*/
#pragma once
-#define SPLIT_LAYER_STATE_ENABLE
-#define SPLIT_LED_STATE_ENABLE
-
-
#define SPLIT_HAND_PIN B9
#define SERIAL_USART_TX_PIN B6
#define SERIAL_USART_SPEED 921600
M keyboards/mlego/m60_split/rev1/info.json => keyboards/mlego/m60_split/rev1/info.json +6 -0
@@ 47,6 47,12 @@
"cols": ["B0", "A3", "A2", "A1", "B7", "B5"],
"rows": ["B1", "A4", "A5", "A6", "A7"]
}
+ },
+ "transport": {
+ "sync": {
+ "indicators": true,
+ "layer_state": true
+ }
}
},
"processor": "STM32F401",
M keyboards/mlego/m60_split/rev2/config.h => keyboards/mlego/m60_split/rev2/config.h +0 -4
@@ 15,10 15,6 @@
*/
#pragma once
-#define SPLIT_LAYER_STATE_ENABLE
-#define SPLIT_LED_STATE_ENABLE
-
-
#define SPLIT_HAND_PIN B9
#define SERIAL_USART_TX_PIN B6
M keyboards/mlego/m60_split/rev2/info.json => keyboards/mlego/m60_split/rev2/info.json +6 -0
@@ 46,6 46,12 @@
"cols": ["B0", "A3", "A2", "A1", "B7", "B5"],
"rows": ["B1", "A4", "A5", "A6", "A7"]
}
+ },
+ "transport": {
+ "sync": {
+ "indicators": true,
+ "layer_state": true
+ }
}
},
"processor": "STM32F411",
M keyboards/nullbitsco/snap/config.h => keyboards/nullbitsco/snap/config.h +0 -3
@@ 59,6 59,3 @@
/* Optional speaker pin */
#define AUDIO_PIN B6
-
-/* Optional split transactions */
-#define SPLIT_OLED_ENABLE
M keyboards/nullbitsco/snap/info.json => keyboards/nullbitsco/snap/info.json +5 -0
@@ 37,6 37,11 @@
{"pin_a": "B4", "pin_b": "B5"}
]
}
+ },
+ "transport": {
+ "sync": {
+ "oled": true
+ }
}
},
"ws2812": {
M keyboards/rgbkb/mun/config.h => keyboards/rgbkb/mun/config.h +0 -3
@@ 41,9 41,6 @@
#endif
/* Split Transport Features */
-#define SPLIT_TRANSPORT_MIRROR
-#define SPLIT_LAYER_STATE_ENABLE
-#define SPLIT_LED_STATE_ENABLE
#define SPLIT_TRANSACTION_IDS_KB TOUCH_ENCODER_SYNC, RGB_MENU_SYNC
#define RGB_MATRIX_LED_COUNT 98
M keyboards/rgbkb/mun/rev1/info.json => keyboards/rgbkb/mun/rev1/info.json +8 -1
@@ 52,7 52,14 @@
"tap_keycode_delay": 5
},
"split": {
- "soft_serial_pin": "A9"
+ "soft_serial_pin": "A9",
+ "transport": {
+ "sync": {
+ "indicators": true,
+ "layer_state": true,
+ "matrix_state": true
+ }
+ }
},
"processor": "STM32F303",
"bootloader": "stm32-dfu",
M keyboards/rgbkb/sol3/config.h => keyboards/rgbkb/sol3/config.h +0 -3
@@ 41,9 41,6 @@
#endif
/* Split Transport Features */
-#define SPLIT_TRANSPORT_MIRROR
-#define SPLIT_LAYER_STATE_ENABLE
-#define SPLIT_LED_STATE_ENABLE
#define SPLIT_TRANSACTION_IDS_KB TOUCH_ENCODER_SYNC, RGB_MENU_SYNC
/* LED Turbo DIP Switch */
M keyboards/rgbkb/sol3/rev1/info.json => keyboards/rgbkb/sol3/rev1/info.json +7 -0
@@ 65,6 65,13 @@
"cols": ["B9", "B8", "B4", "A6", "A3", "B10", "B12", "B11"],
"rows": ["B15", "B14", "A8", "A13", "A7", null]
}
+ },
+ "transport": {
+ "sync": {
+ "indicators": true,
+ "layer_state": true,
+ "matrix_state": true
+ }
}
},
"qmk": {
M keyboards/sofle/keyhive/config.h => keyboards/sofle/keyhive/config.h +0 -4
@@ 21,7 21,3 @@
// OLED settings
#define OLED_TIMEOUT 80000
#define OLED_BRIGHTNESS 90
-
-#define SPLIT_WPM_ENABLE
-#define SPLIT_OLED_ENABLE
-#define SPLIT_TRANSPORT_MIRROR
M keyboards/sofle/keyhive/info.json => keyboards/sofle/keyhive/info.json +7 -0
@@ 41,6 41,13 @@
"cols": ["F6", "F7", "B1", "B3", "B2", "B6", null],
"rows": ["C6", "D7", "E6", "B4", "B5"]
}
+ },
+ "transport": {
+ "sync": {
+ "matrix_state": true,
+ "oled": true,
+ "wpm": true
+ }
}
},
"qmk": {
M keyboards/spleeb/config.h => keyboards/spleeb/config.h +0 -4
@@ 7,10 7,6 @@
// the touch sensor to be on the master side
#define MASTER_RIGHT
-// Sync later, led, and mod state for use on OLED on slave side
-#define SPLIT_LAYER_STATE_ENABLE
-#define SPLIT_LED_STATE_ENABLE
-#define SPLIT_MODS_ENABLE
// Transport dpi and enc mode for display on oled
#define SPLIT_TRANSACTION_IDS_KB RPC_ID_KB_CONFIG_SYNC
M keyboards/spleeb/info.json => keyboards/spleeb/info.json +7 -0
@@ 36,6 36,13 @@
{"pin_a": "GP21", "pin_b": "GP4"}
]
}
+ },
+ "transport": {
+ "sync": {
+ "indicators": true,
+ "layer_state": true,
+ "modifiers": true
+ }
}
},
"url": "https://github.com/chrishoage/spleeb",
M keyboards/stront/config.h => keyboards/stront/config.h +0 -2
@@ 13,8 13,6 @@
/* any side can be master by default, enable split sync to support it */
#define EE_HANDS
-#define SPLIT_LED_STATE_ENABLE
-#define SPLIT_MODS_ENABLE
#define SPLIT_POINTING_ENABLE
/* SPI config for display/touchpad */
M keyboards/stront/info.json => keyboards/stront/info.json +7 -1
@@ 61,7 61,13 @@
"rows": ["GP28", "GP27", "GP26", "GP15"]
},
"split": {
- "enabled": true
+ "enabled": true,
+ "transport": {
+ "sync": {
+ "indicators": true,
+ "modifiers": true
+ }
+ }
},
"encoder": {
"rotary": [
M => +0 -3
@@ 7,6 7,3 @@
#define RGBLIGHT_DEFAULT_VAL 87
#define SPLIT_HAND_PIN B5
#define SPLIT_LAYER_STATE_ENABLE
#define SPLIT_LED_STATE_ENABLE
#define SPLIT_OLED_ENABLE
M => +7 -2
@@ 56,8 56,13 @@
"soft_serial_pin": "D2",
"transport": {
"protocol": "serial",
"sync_matrix_state": true,
"sync_modifiers": true
"sync": {
"indicators": true,
"layer_state": true,
"matrix_state": true,
"modifiers": true,
"oled": true
}
},
"usb_detect": {
"enabled": true
M keyboards/tzarc/djinn/config.h => keyboards/tzarc/djinn/config.h +0 -6
@@ 11,12 11,6 @@
// Split configuration
#define SPLIT_TRANSACTION_IDS_KB RPC_ID_SYNC_STATE_KB
-#define SPLIT_TRANSPORT_MIRROR
-#define SPLIT_LAYER_STATE_ENABLE
-#define SPLIT_LED_STATE_ENABLE
-#define SPLIT_MODS_ENABLE
-#define SPLIT_WPM_ENABLE
-#define SPLIT_ACTIVITY_ENABLE
// SPI Configuration
#define SPI_DRIVER SPID3
M keyboards/tzarc/djinn/info.json => keyboards/tzarc/djinn/info.json +10 -0
@@ 52,6 52,16 @@
{"pin_a": "C15", "pin_b": "C14", "resolution": 2}
]
}
+ },
+ "transport": {
+ "sync": {
+ "activity": true,
+ "indicators": true,
+ "layer_state": true,
+ "matrix_state": true,
+ "modifiers": true,
+ "wpm": true
+ }
}
},
"encoder": {
M keyboards/waterfowl/config.h => keyboards/waterfowl/config.h +1 -2
@@ 17,6 17,5 @@
#pragma once
#define OLED_DISPLAY_128X64
-#define SPLIT_MODS_ENABLE
-#define SPLIT_WPM_ENABLE
+
#define SPLIT_USB_DETECT
M keyboards/waterfowl/info.json => keyboards/waterfowl/info.json +7 -1
@@ 20,7 20,13 @@
]
},
"split": {
- "soft_serial_pin": "D2"
+ "soft_serial_pin": "D2",
+ "transport": {
+ "sync": {
+ "modifiers": true,
+ "wpm": true
+ }
+ }
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",