A keyboards/mechlovin/jay60/config.h => keyboards/mechlovin/jay60/config.h +147 -0
@@ 0,0 1,147 @@
+/*
+Copyright 2021 Mechlovin'
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x4D4C
+#define PRODUCT_ID 0x0600
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Mechlovin Studio
+#define PRODUCT Jay60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { C2, C1, C0, D7, A1 }
+#define MATRIX_COL_PINS { B6, B5, B3, B2, B1, B0, A0, A6, A7, C7, C6, C5, C4, C3 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+//#define LED_NUM_LOCK_PIN B0
+#define LED_CAPS_LOCK_PIN D4
+//#define LED_SCROLL_LOCK_PIN B2
+//#define LED_COMPOSE_PIN B3
+//#define LED_KANA_PIN B4
+
+//#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_LEVELS 3
+//#define BACKLIGHT_BREATHING
+
+//#define RGB_DI_PIN E2
+//#ifdef RGB_DI_PIN
+//# define RGBLED_NUM 16
+//# define RGBLIGHT_HUE_STEP 8
+//# define RGBLIGHT_SAT_STEP 8
+//# define RGBLIGHT_VAL_STEP 8
+//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+//# define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//# define RGBLIGHT_EFFECT_BREATHING
+//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//# define RGBLIGHT_EFFECT_SNAKE
+//# define RGBLIGHT_EFFECT_KNIGHT
+//# define RGBLIGHT_EFFECT_CHRISTMAS
+//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//# define RGBLIGHT_EFFECT_RGB_TEST
+//# define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+//#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0
A keyboards/mechlovin/jay60/info.json => keyboards/mechlovin/jay60/info.json +78 -0
@@ 0,0 1,78 @@
+{
+ "keyboard_name": "Jay60",
+ "url": "",
+ "maintainer": "Mechlovin' Studio",
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [
+ {"x": 0, "y": 0},
+ {"x": 1, "y": 0},
+ {"x": 2, "y": 0},
+ {"x": 3, "y": 0},
+ {"x": 4, "y": 0},
+ {"x": 5, "y": 0},
+ {"x": 6, "y": 0},
+ {"x": 7, "y": 0},
+ {"x": 8, "y": 0},
+ {"x": 9, "y": 0},
+ {"x": 10, "y": 0},
+ {"x": 11, "y": 0},
+ {"x": 12, "y": 0},
+ {"x": 13, "y": 0},
+ {"x": 14, "y": 0},
+
+ {"x": 0, "y": 1, "w": 1.5},
+ {"x": 1.5, "y": 1},
+ {"x": 2.5, "y": 1},
+ {"x": 3.5, "y": 1},
+ {"x": 4.5, "y": 1},
+ {"x": 5.5, "y": 1},
+ {"x": 6.5, "y": 1},
+ {"x": 7.5, "y": 1},
+ {"x": 8.5, "y": 1},
+ {"x": 9.5, "y": 1},
+ {"x": 10.5, "y": 1},
+ {"x": 11.5, "y": 1},
+ {"x": 12.5, "y": 1},
+ {"x": 13.5, "y": 1, "w": 1.5},
+
+ {"x": 0, "y": 2, "w": 1.75},
+ {"x": 1.75, "y": 2},
+ {"x": 2.75, "y": 2},
+ {"x": 3.75, "y": 2},
+ {"x": 4.75, "y": 2},
+ {"x": 5.75, "y": 2},
+ {"x": 6.75, "y": 2},
+ {"x": 7.75, "y": 2},
+ {"x": 8.75, "y": 2},
+ {"x": 9.75, "y": 2},
+ {"x": 10.75, "y": 2},
+ {"x": 11.75, "y": 2},
+ {"x": 12.75, "y": 2, "w": 2.25},
+
+ {"x": 0, "y": 3, "w": 2.25},
+ {"x": 2.25, "y": 3},
+ {"x": 3.25, "y": 3},
+ {"x": 4.25, "y": 3},
+ {"x": 5.25, "y": 3},
+ {"x": 6.25, "y": 3},
+ {"x": 7.25, "y": 3},
+ {"x": 8.25, "y": 3},
+ {"x": 9.25, "y": 3},
+ {"x": 10.25, "y": 3},
+ {"x": 11.25, "y": 3},
+ {"x": 12.25, "y": 3, "w": 1.75},
+ {"x": 14, "y": 3},
+
+ {"x": 0, "y": 4, "w": 1.25},
+ {"x": 1.25, "y": 4, "w": 1.25},
+ {"x": 2.5, "y": 4, "w": 1.25},
+ {"x": 3.75, "y": 4, "w": 6.25},
+ {"x": 10, "y": 4, "w": 1.25},
+ {"x": 11.25, "y": 4, "w": 1.25},
+ {"x": 12.5, "y": 4, "w": 1.25},
+ {"x": 13.75, "y": 4, "w": 1.25}
+ ]
+ }
+ }
+}
A keyboards/mechlovin/jay60/jay60.c => keyboards/mechlovin/jay60/jay60.c +17 -0
@@ 0,0 1,17 @@
+/* Copyright 2021 Mechlovin'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "jay60.h"
A keyboards/mechlovin/jay60/jay60.h => keyboards/mechlovin/jay60/jay60.h +41 -0
@@ 0,0 1,41 @@
+/* Copyright 2021 Mechlovin'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_all( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2C, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+ K40, K41, K42, K46, K4A, K4B, K4C, K4D \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+ { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
+ { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D }, \
+}
A keyboards/mechlovin/jay60/keymaps/default/keymap.c => keyboards/mechlovin/jay60/keymaps/default/keymap.c +36 -0
@@ 0,0 1,36 @@
+/* Copyright 2021 Mechlovin' Studio
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define LT1_CAP LT(1, KC_CAPS)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_all(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+ LT1_CAP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, TO(1),
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_MENU, KC_LCTL
+ ),
+ [1] = LAYOUT_all(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PENT,
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_P0, KC_P1, KC_P2, KC_P3, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+
+};
A keyboards/mechlovin/jay60/keymaps/default/readme.md => keyboards/mechlovin/jay60/keymaps/default/readme.md +1 -0
@@ 0,0 1,1 @@
+# The default keymap for common60
A keyboards/mechlovin/jay60/keymaps/via/keymap.c => keyboards/mechlovin/jay60/keymaps/via/keymap.c +50 -0
@@ 0,0 1,50 @@
+/* Copyright 2020 Mechlovin'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define LT1_CAP LT(1, KC_CAPS)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_all(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+ LT1_CAP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, TO(1),
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_MENU, KC_LCTL
+ ),
+ [1] = LAYOUT_all(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PENT,
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_P0, KC_P1, KC_P2, KC_P3, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ [2] = LAYOUT_all(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ [3] = LAYOUT_all(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+
+};
A keyboards/mechlovin/jay60/keymaps/via/rules.mk => keyboards/mechlovin/jay60/keymaps/via/rules.mk +1 -0
@@ 0,0 1,1 @@
+VIA_ENABLE = yes<
\ No newline at end of file
A keyboards/mechlovin/jay60/readme.md => keyboards/mechlovin/jay60/readme.md +26 -0
@@ 0,0 1,26 @@
+# jay60
+
+
+
+Jay60 PCB, Unikorn PCB compatible
+* Keyboard Maintainer: [Mechlovin'](https://mechlovin.studio)
+* Hardware Supported: Jay60, Atmega32A
+* Hardware Availability: [Mechlovin'](https://mechlovin.studio)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make mechlovin/jay60:default
+
+Flashing example for this keyboard:
+
+ make mechlovin/jay60:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Bootloader reset**: Hold down the key at (0,13) in the matrix (Backspace) and plug in the keyboard
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
A keyboards/mechlovin/jay60/rules.mk => keyboards/mechlovin/jay60/rules.mk +24 -0
@@ 0,0 1,24 @@
+# MCU name
+MCU = atmega32a
+
+# Processor frequency
+F_CPU = 16000000
+
+# Bootloader selection
+BOOTLOADER = usbasploader
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output