D keyboards/boardsource/5x12/5x12.c => keyboards/boardsource/5x12/5x12.c +0 -1
@@ 1,1 0,0 @@
-#include "5x12.h">
\ No newline at end of file
D keyboards/boardsource/5x12/5x12.h => keyboards/boardsource/5x12/5x12.h +0 -17
@@ 1,17 0,0 @@
-#pragma once
-#include "quantum.h"
-
-#define LAYOUT_ortho_5x12( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, \
- K12, K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, \
- K24, K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, K35, \
- K36, K37, K38, K39, K40, K41, K42, K43, K44, K45, K46, K47, \
- K48, K49, K50, K51, K52, K53, K54, K55, K56, K57, K58, K59 \
- ) { \
- {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11}, \
- {K12, K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23}, \
- {K24, K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, K35}, \
- {K36, K37, K38, K39, K40, K41, K42, K43, K44, K45, K46, K47}, \
- {K48, K49, K50, K51, K52, K53, K54, K55, K56, K57, K58, K59} \
- }
-
D keyboards/boardsource/5x12/config.h => keyboards/boardsource/5x12/config.h +0 -69
@@ 1,69 0,0 @@
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0x4273 // "Bs" - Boardsource
-#define PRODUCT_ID 0x0512
-#define DEVICE_VER 0x0000
-#define MANUFACTURER Boardsource
-#define PRODUCT 5x12
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 12
-#define MATRIX_ROW_PINS { D2, D3, D1, D0, D4 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, B5, B4, E6, D7 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
M keyboards/boardsource/5x12/info.json => keyboards/boardsource/5x12/info.json +88 -72
@@ 1,75 1,91 @@
{
- "keyboard_name": "boardsource 5x12",
- "url": "https://boardsource.xyz",
- "maintainer": "boardsource",
- "layouts": {
- "LAYOUT_ortho_5x12": {
- "layout": [
- { "label": "K01", "x": 0, "y": 0 },
- { "label": "K02", "x": 1, "y": 0 },
- { "label": "K03", "x": 2, "y": 0 },
- { "label": "K04", "x": 3, "y": 0 },
- { "label": "K05", "x": 4, "y": 0 },
- { "label": "K06", "x": 5, "y": 0 },
- { "label": "K07", "x": 6, "y": 0 },
- { "label": "K08", "x": 7, "y": 0 },
- { "label": "K09", "x": 8, "y": 0 },
- { "label": "K010", "x": 9, "y": 0 },
- { "label": "K011", "x": 10, "y": 0 },
- { "label": "K012", "x": 11, "y": 0 },
-
- { "label": "K11", "x": 0, "y": 1 },
- { "label": "K12", "x": 1, "y": 1 },
- { "label": "K13", "x": 2, "y": 1 },
- { "label": "K14", "x": 3, "y": 1 },
- { "label": "K15", "x": 4, "y": 1 },
- { "label": "K16", "x": 5, "y": 1 },
- { "label": "K17", "x": 6, "y": 1 },
- { "label": "K18", "x": 7, "y": 1 },
- { "label": "K19", "x": 8, "y": 1 },
- { "label": "K110", "x": 9, "y": 1 },
- { "label": "K111", "x": 10, "y": 1 },
- { "label": "K112", "x": 11, "y": 1 },
-
- { "label": "K21", "x": 0, "y": 2 },
- { "label": "K22", "x": 1, "y": 2 },
- { "label": "K23", "x": 2, "y": 2 },
- { "label": "K24", "x": 3, "y": 2 },
- { "label": "K25", "x": 4, "y": 2 },
- { "label": "K26", "x": 5, "y": 2 },
- { "label": "K27", "x": 6, "y": 2 },
- { "label": "K28", "x": 7, "y": 2 },
- { "label": "K29", "x": 8, "y": 2 },
- { "label": "K210", "x": 9, "y": 2 },
- { "label": "K211", "x": 10, "y": 2 },
- { "label": "K212", "x": 11, "y": 2 },
-
- { "label": "K31", "x": 0, "y": 3 },
- { "label": "K32", "x": 1, "y": 3 },
- { "label": "K33", "x": 2, "y": 3 },
- { "label": "K34", "x": 3, "y": 3 },
- { "label": "K35", "x": 4, "y": 3 },
- { "label": "K36", "x": 5, "y": 3 },
- { "label": "K37", "x": 6, "y": 3 },
- { "label": "K38", "x": 7, "y": 3 },
- { "label": "K39", "x": 8, "y": 3 },
- { "label": "K310", "x": 9, "y": 3 },
- { "label": "K311", "x": 10, "y": 3 },
- { "label": "K312", "x": 11, "y": 3 },
-
- { "label": "K41", "x": 0, "y": 4 },
- { "label": "K42", "x": 1, "y": 4 },
- { "label": "K43", "x": 2, "y": 4 },
- { "label": "K44", "x": 3, "y": 4 },
- { "label": "K45", "x": 4, "y": 4 },
- { "label": "K46", "x": 5, "y": 4 },
- { "label": "K47", "x": 6, "y": 4 },
- { "label": "K48", "x": 7, "y": 4 },
- { "label": "K49", "x": 8, "y": 4 },
- { "label": "K410", "x": 9, "y": 4 },
- { "label": "K411", "x": 10, "y": 4 },
- { "label": "K412", "x": 11, "y": 4 }
- ]
- }
+ "manufacturer": "Boardsource",
+ "keyboard_name": "5x12",
+ "maintainer": "waffle87",
+ "development_board": "promicro",
+ "diode_direction": "COL2ROW",
+ "features": {
+ "bootmagic": true,
+ "extrakey": true,
+ "mousekey": true
+ },
+ "matrix_pins": {
+ "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6", "B5", "B4", "E6", "D7"],
+ "rows": ["D2", "D3", "D1", "D0", "D4"]
+ },
+ "url": "https://boardsource.xyz/store/5ecb802c86879c9a0c22db61",
+ "usb": {
+ "device_version": "1.0.0",
+ "pid": "0x0512",
+ "vid": "0x4273"
+ },
+ "community_layouts": [
+ "ortho_5x12"
+ ],
+ "layouts": {
+ "LAYOUT_ortho_5x12": {
+ "layout": [
+ { "matrix": [0, 0], "x": 0, "y": 0 },
+ { "matrix": [0, 1], "x": 1, "y": 0 },
+ { "matrix": [0, 2], "x": 2, "y": 0 },
+ { "matrix": [0, 3], "x": 3, "y": 0 },
+ { "matrix": [0, 4], "x": 4, "y": 0 },
+ { "matrix": [0, 5], "x": 5, "y": 0 },
+ { "matrix": [0, 6], "x": 6, "y": 0 },
+ { "matrix": [0, 7], "x": 7, "y": 0 },
+ { "matrix": [0, 8], "x": 8, "y": 0 },
+ { "matrix": [0, 9], "x": 9, "y": 0 },
+ { "matrix": [0, 10], "x": 10, "y": 0 },
+ { "matrix": [0, 11], "x": 11, "y": 0 },
+ { "matrix": [1, 0], "x": 0, "y": 1 },
+ { "matrix": [1, 1], "x": 1, "y": 1 },
+ { "matrix": [1, 2], "x": 2, "y": 1 },
+ { "matrix": [1, 3], "x": 3, "y": 1 },
+ { "matrix": [1, 4], "x": 4, "y": 1 },
+ { "matrix": [1, 5], "x": 5, "y": 1 },
+ { "matrix": [1, 6], "x": 6, "y": 1 },
+ { "matrix": [1, 7], "x": 7, "y": 1 },
+ { "matrix": [1, 8], "x": 8, "y": 1 },
+ { "matrix": [1, 9], "x": 9, "y": 1 },
+ { "matrix": [1, 10], "x": 10, "y": 1 },
+ { "matrix": [1, 11], "x": 11, "y": 1 },
+ { "matrix": [2, 0], "x": 0, "y": 2 },
+ { "matrix": [2, 1], "x": 1, "y": 2 },
+ { "matrix": [2, 2], "x": 2, "y": 2 },
+ { "matrix": [2, 3], "x": 3, "y": 2 },
+ { "matrix": [2, 4], "x": 4, "y": 2 },
+ { "matrix": [2, 5], "x": 5, "y": 2 },
+ { "matrix": [2, 6], "x": 6, "y": 2 },
+ { "matrix": [2, 7], "x": 7, "y": 2 },
+ { "matrix": [2, 8], "x": 8, "y": 2 },
+ { "matrix": [2, 9], "x": 9, "y": 2 },
+ { "matrix": [2, 10], "x": 10, "y": 2 },
+ { "matrix": [2, 11], "x": 11, "y": 2 },
+ { "matrix": [3, 0], "x": 0, "y": 3 },
+ { "matrix": [3, 1], "x": 1, "y": 3 },
+ { "matrix": [3, 2], "x": 2, "y": 3 },
+ { "matrix": [3, 3], "x": 3, "y": 3 },
+ { "matrix": [3, 4], "x": 4, "y": 3 },
+ { "matrix": [3, 5], "x": 5, "y": 3 },
+ { "matrix": [3, 6], "x": 6, "y": 3 },
+ { "matrix": [3, 7], "x": 7, "y": 3 },
+ { "matrix": [3, 8], "x": 8, "y": 3 },
+ { "matrix": [3, 9], "x": 9, "y": 3 },
+ { "matrix": [3, 10], "x": 10, "y": 3 },
+ { "matrix": [3, 11], "x": 11, "y": 3 },
+ { "matrix": [4, 0], "x": 0, "y": 4 },
+ { "matrix": [4, 1], "x": 1, "y": 4 },
+ { "matrix": [4, 2], "x": 2, "y": 4 },
+ { "matrix": [4, 3], "x": 3, "y": 4 },
+ { "matrix": [4, 4], "x": 4, "y": 4 },
+ { "matrix": [4, 5], "x": 5, "y": 4 },
+ { "matrix": [4, 6], "x": 6, "y": 4 },
+ { "matrix": [4, 7], "x": 7, "y": 4 },
+ { "matrix": [4, 8], "x": 8, "y": 4 },
+ { "matrix": [4, 9], "x": 9, "y": 4 },
+ { "matrix": [4, 10], "x": 10, "y": 4 },
+ { "matrix": [4, 11], "x": 11, "y": 4 }
+ ]
}
+ }
}
M keyboards/boardsource/5x12/keymaps/default/keymap.c => keyboards/boardsource/5x12/keymaps/default/keymap.c +17 -20
@@ 1,3 1,5 @@
+// Copyright 2022 @waffle87
+// SPDX-License-Identifier: GPL-2.0-or-later
#include QMK_KEYBOARD_H
enum layers {
@@ 6,34 8,29 @@ enum layers {
_LOWER,
};
-// Readability keycodes
#define LOWER MO(_LOWER)
#define RAISE MO(_RAISE)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
[_MAIN] = LAYOUT_ortho_5x12(
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL,
- KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
- KC_PIPE, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL,
+ KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
+ KC_PIPE, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT
),
-
[_RAISE] = LAYOUT_ortho_5x12(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
- _______, KC_4, KC_5, KC_6, KC_PLUS, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______,
- KC_ENT, KC_7, KC_8, KC_9, KC_MINS, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_MUTE, _______, KC_BSLS,
- QK_BOOT, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
+ _______, KC_4, KC_5, KC_6, KC_PLUS, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______,
+ KC_ENT, KC_7, KC_8, KC_9, KC_MINS, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_MUTE, _______, KC_BSLS,
+ QK_BOOT, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
),
-
[_LOWER] = LAYOUT_ortho_5x12(
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
- _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,
- KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- QK_BOOT, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,
+ KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ QK_BOOT, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
)
-
};
M keyboards/boardsource/5x12/keymaps/via/keymap.c => keyboards/boardsource/5x12/keymaps/via/keymap.c +22 -26
@@ 1,3 1,5 @@
+// Copyright 2022 @gwillad
+// SPDX-License-Identifier: GPL-2.0-or-later
#include QMK_KEYBOARD_H
enum layers {
@@ 6,42 8,36 @@ enum layers {
_LOWER,
};
-// Readability keycodes
#define LOWER MO(_LOWER)
#define RAISE MO(_RAISE)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
[_MAIN] = LAYOUT_ortho_5x12(
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL,
- KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
- KC_PIPE, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL,
+ KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
+ KC_PIPE, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT
),
-
[_RAISE] = LAYOUT_ortho_5x12(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
- _______, KC_4, KC_5, KC_6, KC_PLUS, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______,
- KC_ENT, KC_7, KC_8, KC_9, KC_MINS, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_MUTE, _______, KC_BSLS,
- QK_BOOT, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
+ _______, KC_4, KC_5, KC_6, KC_PLUS, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______,
+ KC_ENT, KC_7, KC_8, KC_9, KC_MINS, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_MUTE, _______, KC_BSLS,
+ QK_BOOT, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
),
-
[_LOWER] = LAYOUT_ortho_5x12(
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
- _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,
- KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- QK_BOOT, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,
+ KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ QK_BOOT, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
),
-
[3] = LAYOUT_ortho_5x12(
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
)
-
};
D keyboards/boardsource/5x12/keymaps/via/readme.md => keyboards/boardsource/5x12/keymaps/via/readme.md +0 -5
@@ 1,5 0,0 @@
-# The via keymap for boardsource 5x12 ortholinear keyboard
-
-This folder contains the [VIA](https://caniusevia.com/) configuration for the boardsource 5x12 ortholinear keyboard
-
-Maintained by: [gwillad](https://github.com/gwillad)
M keyboards/boardsource/5x12/rules.mk => keyboards/boardsource/5x12/rules.mk +1 -24
@@ 1,24 1,1 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = yes # Console for debug
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = no # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-AUDIO_ENABLE = no # Audio output
-
-LAYOUTS = ortho_5x12
-
-# Disable unsupported hardware
-RGBLIGHT_SUPPORTED = no
-AUDIO_SUPPORTED = no
-BACKLIGHT_SUPPORTED = no
+# This file intentionally left blank