[Keyboard] Add RGB matrix to CK60 (#15817)
3 files changed, 70 insertions(+), 80 deletions(-) M keyboards/senselessclay/ck60/ck60.c M keyboards/senselessclay/ck60/config.h M keyboards/senselessclay/ck60/rules.mk
M keyboards/senselessclay/ck60/ck60.c => keyboards/senselessclay/ck60/ck60.c +28 -2
@@ 1,4 1,4 @@ /* Copyright 2020 Hadi Iskandarani /* Copyright 2022 kb-elmo<mail@elmo.space> * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ 14,4 14,30 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "ck60.h" \ No newline at end of file #include "ck60.h" #define __ NO_LED #ifdef RGB_MATRIX_ENABLE led_config_t g_led_config = { { //Key Matrix to LED Index { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 }, { 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14 }, { 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, __ }, { 53, 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, 42, 41, __ }, { 54, 55, 56, __, __, __, 57, __, __, __, 58, 59, 60, 61 } }, { //LED Index to Physical Positon { 0, 0 }, { 17, 0 }, { 34, 0 }, { 52, 0 }, { 69, 0 }, { 86, 0 }, { 103, 0 }, { 121, 0 }, { 138, 0 }, { 155, 0 }, { 172, 0 }, { 190, 0 }, { 207, 0 }, { 215, 0 }, { 224, 24 }, { 215, 16 }, { 198, 16 }, { 180, 16 }, { 164, 16 }, { 146, 16 }, { 129, 16 }, { 112, 16 }, { 95, 16 }, { 78, 16 }, { 60, 16 }, { 43, 16 }, { 26 , 16 }, { 0, 16 }, { 0, 32 }, { 30, 32 }, { 47, 32 }, { 65, 32 }, { 81, 32 }, { 99, 32 }, { 116, 32 }, { 133, 32 }, { 150, 32 }, { 168, 32 }, { 185, 32 }, { 202, 32 }, { 220, 32 }, { 207, 48 }, { 190, 48 }, { 172, 48 }, { 155, 48 }, { 138, 48 }, { 121, 48 }, { 103, 48 }, { 86, 48 }, { 69, 48 }, { 52, 48 }, { 34, 48 }, { 17, 48 }, { 0, 48 }, { 0, 64 }, { 17, 64 }, { 34, 64 }, { 103, 64 }, { 172, 64 }, { 190, 64 }, { 207, 64 }, { 224, 64 } }, { 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1, 4, 1, 1, 1, 1 } }; #endif
M keyboards/senselessclay/ck60/config.h => keyboards/senselessclay/ck60/config.h +36 -75
@@ 30,90 30,51 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROWS 5 #define MATRIX_COLS 14 /* * Keyboard Matrix Assignments * * Change this to how you wired your keyboard * COLS: AVR pins used for columns, left to right * ROWS: AVR pins used for rows, top to bottom * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * */ /* rev0 */ /* Keyboard Matrix Assignments */ #define MATRIX_ROW_PINS { B3, B2, F1, F4, F5 } #define MATRIX_COL_PINS { F0, D5, D3, D2, D1, D0, C7, C6, B6, B5, B4, D7, D6, D4 } //#define UNUSED_PINS { B0, B7, E6 } /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ /* Debounce reduces chatter */ #define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE /* If defined, GRAVE_ESC will always act as ESC when CTRL is held. * This is useful for the Windows task manager shortcut (ctrl+shift+esc). */ //#define GRAVE_ESC_CTRL_OVERRIDE /* * Force NKRO * * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the * makefile for this to work.) * * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) * until the next keyboard reset. * * NKRO may prevent your keystrokes from being detected in the BIOS, but it is * fully operational during normal computer usage. * * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by * bootmagic, NKRO mode will always be enabled until it is toggled again during a * power-up. * */ //#define FORCE_NKRO /* * Feature disable options * These options are also useful to firmware size reduction. */ /* disable debug print */ //#define NO_DEBUG /* disable print */ //#define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT /* RGB matrix lighting */ #define RGB_DI_PIN B1 #define DRIVER_LED_TOTAL 62 #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 160 // limit brightness to not overamp the USB #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // 16 is equivalent to limiting to 60fps #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL // RGB Matrix Animation modes. Explicitly enabled // For full list of effects, see: // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects # define ENABLE_RGB_MATRIX_ALPHAS_MODS # define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN # define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT # define ENABLE_RGB_MATRIX_BREATHING # define ENABLE_RGB_MATRIX_BAND_VAL # define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL # define ENABLE_RGB_MATRIX_CYCLE_ALL # define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT # define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN # define ENABLE_RGB_MATRIX_CYCLE_OUT_IN # define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL # define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS # define ENABLE_RGB_MATRIX_RAINDROPS // enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined # define ENABLE_RGB_MATRIX_TYPING_HEATMAP // enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined # define ENABLE_RGB_MATRIX_SOLID_REACTIVE # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE # define ENABLE_RGB_MATRIX_MULTISPLASH # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH /* disable these deprecated features by default */ #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION /* Bootmagic Lite key configuration */ //#define BOOTMAGIC_LITE_ROW 0 //#define BOOTMAGIC_LITE_COLUMN 0 /* RGB Backlighting */ #define RGB_DI_PIN B1 #define RGBLED_NUM 62 #define RGBLIGHT_ANIMATIONS #define RGBLIGHT_LIMIT_VAL 128 #define RGBLIGHT_SLEEP #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL+5 \ No newline at end of file
M keyboards/senselessclay/ck60/rules.mk => keyboards/senselessclay/ck60/rules.mk +6 -3
@@ 8,11 8,14 @@ BOOTLOADER = atmel-dfu # change yes to no to disable # BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output \ No newline at end of file RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # RGB matrix lighting RGB_MATRIX_DRIVER = WS2812 \ No newline at end of file