A keyboards/hardlineworks/otd_plus/config.h => keyboards/hardlineworks/otd_plus/config.h +33 -0
@@ 0,0 1,33 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x484C // "HL"
+#define PRODUCT_ID 0x0087 // "TKL"
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Hardlineworks
+#define PRODUCT OTD-PLUS
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 9
+
+#define MATRIX_ROW_PINS { D2, D4, D1, E6, F5, C6, B6, F6, F0, D0, D6, D3 }
+#define MATRIX_COL_PINS { B3, B2, B1, B7, B0, F1, D7, F7, C7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define CAPS_LOCK_LED_PIN F4
+#define SCROLL_LOCK_LED_PIN D5
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
A keyboards/hardlineworks/otd_plus/info.json => keyboards/hardlineworks/otd_plus/info.json +103 -0
@@ 0,0 1,103 @@
+{
+ "keyboard_name": "OTD-PLUS",
+ "url": "",
+ "maintainer": "Hardlineworks",
+ "width": 18.25,
+ "height": 6.25,
+ "layouts": {
+ "LAYOUT_tkl_ansi_wkl": {
+ "layout": [
+
+ {"label" : "Esc", "x":0, "y":0},
+ {"label" : "F1", "x":2, "y":0},
+ {"label" : "F2", "x":3, "y":0},
+ {"label" : "F3", "x":4, "y":0},
+ {"label" : "F4", "x":5, "y":0},
+ {"label" : "F5", "x":6.5, "y":0},
+ {"label" : "F6", "x":7.5, "y":0},
+ {"label" : "F7", "x":8.5, "y":0},
+ {"label" : "F8", "x":9.5, "y":0},
+ {"label" : "F9", "x":11, "y":0},
+ {"label" : "F10", "x":12, "y":0},
+ {"label" : "F11", "x":13, "y":0},
+ {"label" : "F12", "x":14, "y":0},
+ {"label" : "Print screen", "x":15.25, "y":0},
+ {"label" : "Scroll lock", "x":16.25, "y":0},
+ {"label" : "Pause", "x":17.25, "y":0},
+
+ {"label" : "`", "x":0, "y":1.25},
+ {"label" : "1", "x":1, "y":1.25},
+ {"label" : "2", "x":2, "y":1.25},
+ {"label" : "3", "x":3, "y":1.25},
+ {"label" : "4", "x":4, "y":1.25},
+ {"label" : "5", "x":5, "y":1.25},
+ {"label" : "6", "x":6, "y":1.25},
+ {"label" : "7", "x":7, "y":1.25},
+ {"label" : "8", "x":8, "y":1.25},
+ {"label" : "9", "x":9, "y":1.25},
+ {"label" : "0", "x":10, "y":1.25},
+ {"label" : "-", "x":11, "y":1.25},
+ {"label" : "=", "x":12, "y":1.25},
+ {"label" : "Backspace", "x":13, "y":1.25, "w":2},
+ {"label" : "Insert", "x":15.25, "y":1.25},
+ {"label" : "Home", "x":16.25, "y":1.25},
+ {"label" : "Page up", "x":17.25, "y":1.25},
+
+ {"label" : "Tab", "x":0, "y":2.25, "w":1.5},
+ {"label" : "Q", "x":1.5, "y":2.25},
+ {"label" : "W", "x":2.5, "y":2.25},
+ {"label" : "E", "x":3.5, "y":2.25},
+ {"label" : "R", "x":4.5, "y":2.25},
+ {"label" : "T", "x":5.5, "y":2.25},
+ {"label" : "Y", "x":6.5, "y":2.25},
+ {"label" : "U", "x":7.5, "y":2.25},
+ {"label" : "I", "x":8.5, "y":2.25},
+ {"label" : "O", "x":9.5, "y":2.25},
+ {"label" : "P", "x":10.5, "y":2.25},
+ {"label" : "[", "x":11.5, "y":2.25},
+ {"label" : "]", "x":12.5, "y":2.25},
+ {"label" : "|", "x":13.5, "y":2.25, "w":1.5},
+ {"label" : "Delete", "x":15.25, "y":2.25},
+ {"label" : "End", "x":16.25, "y":2.25},
+ {"label" : "Page down", "x":17.25, "y":2.25},
+
+ {"label" : "Caps lock", "x":0, "y":3.25, "w":1.75},
+ {"label" : "A", "x":1.75, "y":3.25},
+ {"label" : "S", "x":2.75, "y":3.25},
+ {"label" : "D", "x":3.75, "y":3.25},
+ {"label" : "F", "x":4.75, "y":3.25},
+ {"label" : "G", "x":5.75, "y":3.25},
+ {"label" : "H", "x":6.75, "y":3.25},
+ {"label" : "J", "x":7.75, "y":3.25},
+ {"label" : "K", "x":8.75, "y":3.25},
+ {"label" : "L", "x":9.75, "y":3.25},
+ {"label" : ";", "x":10.75, "y":3.25},
+ {"label" : "'", "x":11.75, "y":3.25},
+ {"label" : "Enter", "x":12.75, "y":3.25, "w":2.25},
+
+ {"label" : "Shift", "x":0, "y":4.25, "w":2.25},
+ {"label" : "Z", "x":2.25, "y":4.25},
+ {"label" : "X", "x":3.25, "y":4.25},
+ {"label" : "C", "x":4.25, "y":4.25},
+ {"label" : "V", "x":5.25, "y":4.25},
+ {"label" : "B", "x":6.25, "y":4.25},
+ {"label" : "N", "x":7.25, "y":4.25},
+ {"label" : "M", "x":8.25, "y":4.25},
+ {"label" : ",", "x":9.25, "y":4.25},
+ {"label" : ".", "x":10.25, "y":4.25},
+ {"label" : "/", "x":11.25, "y":4.25},
+ {"label" : "Shift", "x":12.25, "y":4.25, "w":2.75},
+ {"label" : "Up", "x":16.25, "y":4.25},
+
+ {"label" : "Ctrl", "x":0, "y":5.25, "w":1.5},
+ {"label" : "Alt", "x":2.5, "y":5.25, "w":1.5},
+ {"label" : "Space", "x":4, "y":5.25, "w":7},
+ {"label" : "Alt", "x":11, "y":5.25, "w":1.5},
+ {"label" : "Ctrl", "x":13.5, "y":5.25, "w":1.5},
+ {"label" : "Left", "x":15.25, "y":5.25 },
+ {"label" : "Down", "x":16.25, "y":5.25 },
+ {"label" : "Right", "x":17.25, "y":5.25 }
+ ]
+ }
+ }
+}
A keyboards/hardlineworks/otd_plus/keymaps/default/keymap.c => keyboards/hardlineworks/otd_plus/keymaps/default/keymap.c +22 -0
@@ 0,0 1,22 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [0] = LAYOUT_tkl_ansi_wkl(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
+ KC_LCTL, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ [1] = LAYOUT_tkl_ansi_wkl(
+ RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+};
A keyboards/hardlineworks/otd_plus/otd_plus.c => keyboards/hardlineworks/otd_plus/otd_plus.c +12 -0
@@ 0,0 1,12 @@
+#include "otd_plus.h"
+
+void keyboard_pre_init_kb(void) {
+ led_init_ports();
+ keyboard_pre_init_user();
+}
+void led_init_ports(void) {
+ setPinOutput(CAPS_LOCK_LED_PIN);
+ setPinOutput(SCROLL_LOCK_LED_PIN);
+}
+
+
A keyboards/hardlineworks/otd_plus/otd_plus.h => keyboards/hardlineworks/otd_plus/otd_plus.h +35 -0
@@ 0,0 1,35 @@
+
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_tkl_ansi_wkl( \
+ K00, K01, KB1, K02, KB2, K03, KB3, K04, KB4, KB5, K06, KB6, K07, KB7, K08, KB8, \
+ K10, KA0, K11, KA1, K12, KA2, K13, KA3, K14, KA4, K15, KA5, K16, KA6, KA7, K18, KA8, \
+ K20, K90, K21, K91, K22, K92, K23, K93, K24, K94, K25, K95, K26, K96, K97, K28, K98, \
+ K30, K80, K31, K81, K32, K82, K33, K83, K34, K84, K35, K85, K86, \
+ K40, K70, K41, K71, K42, K72, K43, K73, K44, K74, K45, K46, K48, \
+ K50, K51, K62, K55, K56, K67, K58, K68 \
+) \
+{ \
+ { K00, K01, K02, K03, K04, KC_NO, K06, K07, K08, }, \
+ { K10, K11, K12, K13, K14, K15, K16, KC_NO, K18, }, \
+ { K20, K21, K22, K23, K24, K25, K26, KC_NO, K28, }, \
+ { K30, K31, K32, K33, K34, K35, KC_NO, KC_NO, KC_NO, }, \
+ { K40, K41, K42, K43, K44, K45, K46, KC_NO, K48, }, \
+ { K50, K51, KC_NO, KC_NO, KC_NO, K55, K56, KC_NO, K58, }, \
+ { KC_NO, KC_NO, K62, KC_NO, KC_NO, KC_NO, KC_NO, K67, K68, }, \
+ { K70, K71, K72, K73, K74, KC_NO, KC_NO, KC_NO, KC_NO, }, \
+ { K80, K81, K82, K83, K84, K85, K86, KC_NO, KC_NO, }, \
+ { K90, K91, K92, K93, K94, K95, K96, K97, K98, }, \
+ { KA0, KA1, KA2, KA3, KA4, KA5, KA6, KA7, KA8, }, \
+ { KC_NO, KB1, KB2, KB3, KB4, KB5, KB6, KB7, KB8, }, \
+}
A keyboards/hardlineworks/otd_plus/readme.md => keyboards/hardlineworks/otd_plus/readme.md +16 -0
@@ 0,0 1,16 @@
+# [OTD PLUS](https://github.com/gadzkun/Hardlineworks/tree/master/otd%20plus)
+
+
+
+A modern PCB replacement for OTD keyboards, powered by HardLineWorks
+
+* Keyboard Maintainer : [Hardlineworks](https://github.com/gadzkun/Hardlineworks)
+* Hardware Supported : otd plus pcb
+* Hardware Availability : Private GB
+
+Make example for this keyboard (after setting up your build environment):
+
+ make hardlineworks/otd_plus:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
A keyboards/hardlineworks/otd_plus/rules.mk => keyboards/hardlineworks/otd_plus/rules.mk +22 -0
@@ 0,0 1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no # Enable Bluetooth
+AUDIO_ENABLE = no # Audio output