10 files changed, 48 insertions(+), 60 deletions(-)

D keyboards/alice/readme.md
R keyboards/{ => tgr}/alice/alice.c
R keyboards/{ => tgr}/alice/alice.h
R keyboards/{ => tgr}/alice/config.h
R keyboards/{ => tgr}/alice/info.json
R keyboards/{ => tgr}/alice/keymaps/default/keymap.c
R keyboards/{ => tgr}/alice/keymaps/mrkeebs/keymap.c
A keyboards/tgr/alice/readme.md
R keyboards/{ => tgr}/alice/rules.mk
R keyboards/{ => tgr}/alice/usbconfig.h

@@ 1,60 0,0 @@
-# TGR Alice
-
-![TGR Alice](https://i.imgur.com/cJohEqS.jpg)
-
-An ergonomic 60% keyboard.
-
-Keyboard Maintainer: [Felipe Coury](https://github.com/fcoury)  
-Hardware Supported: TGR Alice  
-Hardware Availability: Group buy finished  
-
-Make example for this keyboard (after setting up your build environment):
-
-    make alice:default
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
-
-
-ps2avrGB keyboard firmware
-==========================
-
-This keyboard uses the port of the QMK firmware for boards that are based on the
-ps2avrGB firmware.
-
-Note that this is a complete replacement for the firmware, so you won't be
-using Bootmapper Client to change any keyboard settings, since not all the
-USB report options are supported.
-
-## Installing
-
-First, install the requirements. These commands are for OSX, but all you
-need is the AVR toolchain and `bootloadHID` for flashing:
-
-```
-$ brew cask install crosspack-avr
-$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
-$ pip install pyusb
-```
-
-Then, with the keyboard plugged in, simply run this command from the
-`qmk_firmware` directory:
-
-```
-$ make alice
-$ bootloadHID -r alice_default.hex
-```
-
-## Setting the board to bootloader mode
-
-Hold the ESC key (the one before the 1! key, in case you remaped it).
-
-## Troubleshooting
-
-From my experience, it's really hard to brick these boards. But these
-tricks have been useful when it got stuck in a weird scenario.
-
-1. Try plugging the board in while holding the bootloader key. This will force
-   it to boot only the bootloader without loading the firmware. Once this is
-   done, just reflash the board with the original firmware.
-2. Sometimes USB hubs can act weird, so try connecting the board directly
-   to your computer or plugging/unplugging the USB hub.

@@ 0,0 1,48 @@
+# Alice
+
+![TGR Alice](https://i.imgur.com/cJohEqS.jpg)
+
+An ergonomic 60% keyboard.
+
+Keyboard Maintainer: [Felipe Coury](https://github.com/fcoury)  
+Hardware Supported: TGR Alice  
+Hardware Availability: Group buy finished  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make tgr/alice:default
+
+Flashing
+
+ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
+
+**Reset Key:** Hold down the key located at `K00`, commonly programmed as `Esc` while plugging in the keyboard.
+
+Windows: 
+1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
+2. Place your keyboard into reset. 
+3. Press the `Find Device` button and ensure that your keyboard is found.
+4. Press the `Open .hex File` button and locate the `.hex` file you created.
+5. Press the `Flash Device` button and wait for the process to complete. 
+
+macOS:
+1. Install homebrew by typing the following:   
+    ```
+    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+    ```
+2. Install `crosspack-avr`.  
+    ```
+    brew cask install crosspack-avr
+    ```
+3. Install the following packages:
+    ```
+    brew install python3
+    pip3 install pyusb
+    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+    ```
+
+4. Place your keyboard into reset. 
+5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
+
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).