A keyboards/tkc/tkl_ab87/config.h => keyboards/tkc/tkl_ab87/config.h +151 -0
@@ 0,0 1,151 @@
+/*
+Copyright 2020 Terry Mathews
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x544B //TK
+#define PRODUCT_ID 0x0007
+#define DEVICE_VER 0x0001
+#define MANUFACTURER TKC
+#define PRODUCT TKL A/B87
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 16
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 2 //Reduced layer count due to memory space considerations
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B1, F5, F7, B0, B2, B3 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, E6, F6, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+#define BACKLIGHT_PIN B7
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+#endif
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+ #define RGBLED_NUM 22
+ #define RGBLIGHT_HUE_STEP 8
+ #define RGBLIGHT_SAT_STEP 8
+ #define RGBLIGHT_VAL_STEP 8
+ #define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */
+ #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+ #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+// #define RGBLIGHT_EFFECT_BREATHING
+// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+// #define RGBLIGHT_EFFECT_SNAKE
+// #define RGBLIGHT_EFFECT_KNIGHT
+// #define RGBLIGHT_EFFECT_CHRISTMAS
+// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+// #define RGBLIGHT_EFFECT_RGB_TEST
+// #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+// /*==== use exp() and sin() ====*/
+// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+#endif
+
+#define LED_SCROLL_LOCK_PIN F0
+#define LED_CAPS_LOCK_PIN F1
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
A keyboards/tkc/tkl_ab87/info.json => keyboards/tkc/tkl_ab87/info.json +103 -0
@@ 0,0 1,103 @@
+{
+ "keyboard_name": "TKC TKL A/B87",
+ "url": "",
+ "maintainer": "TerryMathews",
+ "width": 18.25,
+ "height": 6.5,
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [
+ {"label":"Esc", "x":0, "y":0},
+ {"label":"F1", "x":2, "y":0},
+ {"label":"F2", "x":3, "y":0},
+ {"label":"F3", "x":4, "y":0},
+ {"label":"F4", "x":5, "y":0},
+ {"label":"F5", "x":6.5, "y":0},
+ {"label":"F6", "x":7.5, "y":0},
+ {"label":"F7", "x":8.5, "y":0},
+ {"label":"F8", "x":9.5, "y":0},
+ {"label":"F9", "x":11, "y":0},
+ {"label":"F10", "x":12, "y":0},
+ {"label":"F11", "x":13, "y":0},
+ {"label":"F12", "x":14, "y":0},
+ {"label":"PrtSc", "x":15.25, "y":0},
+ {"label":"Scroll Lock", "x":16.25, "y":0},
+ {"label":"Pause", "x":17.25, "y":0},
+ {"label":"~", "x":0, "y":1.5},
+ {"label":"!", "x":1, "y":1.5},
+ {"label":"@", "x":2, "y":1.5},
+ {"label":"#", "x":3, "y":1.5},
+ {"label":"$", "x":4, "y":1.5},
+ {"label":"%", "x":5, "y":1.5},
+ {"label":"^", "x":6, "y":1.5},
+ {"label":"&", "x":7, "y":1.5},
+ {"label":"*", "x":8, "y":1.5},
+ {"label":"(", "x":9, "y":1.5},
+ {"label":")", "x":10, "y":1.5},
+ {"label":"_", "x":11, "y":1.5},
+ {"label":"+", "x":12, "y":1.5},
+ {"label":"Del", "x":13, "y":1.5},
+ {"label":"Bksp", "x":14, "y":1.5},
+ {"label":"Insert", "x":15.25, "y":1.5},
+ {"label":"Home", "x":16.25, "y":1.5},
+ {"label":"PgUp", "x":17.25, "y":1.5},
+ {"label":"Tab", "x":0, "y":2.5, "w":1.5},
+ {"label":"Q", "x":1.5, "y":2.5},
+ {"label":"W", "x":2.5, "y":2.5},
+ {"label":"E", "x":3.5, "y":2.5},
+ {"label":"R", "x":4.5, "y":2.5},
+ {"label":"T", "x":5.5, "y":2.5},
+ {"label":"Y", "x":6.5, "y":2.5},
+ {"label":"U", "x":7.5, "y":2.5},
+ {"label":"I", "x":8.5, "y":2.5},
+ {"label":"O", "x":9.5, "y":2.5},
+ {"label":"P", "x":10.5, "y":2.5},
+ {"label":"{", "x":11.5, "y":2.5},
+ {"label":"}", "x":12.5, "y":2.5},
+ {"label":"|", "x":13.5, "y":2.5, "w":1.5},
+ {"label":"Delete", "x":15.25, "y":2.5},
+ {"label":"End", "x":16.25, "y":2.5},
+ {"label":"PgDn", "x":17.25, "y":2.5},
+ {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
+ {"label":"A", "x":1.75, "y":3.5},
+ {"label":"S", "x":2.75, "y":3.5},
+ {"label":"D", "x":3.75, "y":3.5},
+ {"label":"F", "x":4.75, "y":3.5},
+ {"label":"G", "x":5.75, "y":3.5},
+ {"label":"H", "x":6.75, "y":3.5},
+ {"label":"J", "x":7.75, "y":3.5},
+ {"label":"K", "x":8.75, "y":3.5},
+ {"label":"L", "x":9.75, "y":3.5},
+ {"label":":", "x":10.75, "y":3.5},
+ {"label":"\"", "x":11.75, "y":3.5},
+ {"label":"Nuhs", "x":12.75, "y":3.5},
+ {"label":"Enter", "x":13.75, "y":3.5, "w":1.25},
+ {"label":"Shift", "x":0, "y":4.5, "w":1.25},
+ {"label":"Nubs", "x":1.25, "y":4.5},
+ {"label":"Z", "x":2.25, "y":4.5},
+ {"label":"X", "x":3.25, "y":4.5},
+ {"label":"C", "x":4.25, "y":4.5},
+ {"label":"V", "x":5.25, "y":4.5},
+ {"label":"B", "x":6.25, "y":4.5},
+ {"label":"N", "x":7.25, "y":4.5},
+ {"label":"M", "x":8.25, "y":4.5},
+ {"label":"<", "x":9.25, "y":4.5},
+ {"label":">", "x":10.25, "y":4.5},
+ {"label":"?", "x":11.25, "y":4.5},
+ {"label":"Shift", "x":12.25, "y":4.5, "w":1.75},
+ {"label":"Del", "x":14, "y":4.5},
+ {"label":"\u2191", "x":16.25, "y":4.5},
+ {"label":"Ctrl", "x":0, "y":5.5, "w":1.25},
+ {"label":"Win", "x":1.25, "y":5.5, "w":1.25},
+ {"label":"Alt", "x":2.5, "y":5.5, "w":1.25},
+ {"x":3.75, "y":5.5, "w":6.25},
+ {"label":"Alt", "x":10, "y":5.5, "w":1.25},
+ {"label":"Win", "x":11.25, "y":5.5, "w":1.25},
+ {"label":"Menu", "x":12.5, "y":5.5, "w":1.25},
+ {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25},
+ {"label":"\u2190", "x":15.25, "y":5.5},
+ {"label":"\u2193", "x":16.25, "y":5.5},
+ {"label":"\u2192", "x":17.25, "y":5.5}]
+ }
+ }
+}<
\ No newline at end of file
A keyboards/tkc/tkl_ab87/keymaps/default/keymap.c => keyboards/tkc/tkl_ab87/keymaps/default/keymap.c +28 -0
@@ 0,0 1,28 @@
+/* Copyright 2020 Terry Mathews
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_all( /* Base */
+
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL, KC_UP,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+};
A keyboards/tkc/tkl_ab87/keymaps/via/keymap.c => keyboards/tkc/tkl_ab87/keymaps/via/keymap.c +44 -0
@@ 0,0 1,44 @@
+/* Copyright 2020 Terry Mathews
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+//Layers
+
+enum {
+ BASE = 0,
+ FUNCTION,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [BASE] = LAYOUT_all( /* Base */
+
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL, KC_UP,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+ [FUNCTION] = LAYOUT_all( /* Function */
+
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+};
A keyboards/tkc/tkl_ab87/keymaps/via/rules.mk => keyboards/tkc/tkl_ab87/keymaps/via/rules.mk +1 -0
@@ 0,0 1,1 @@
+VIA_ENABLE = yes
A keyboards/tkc/tkl_ab87/readme.md => keyboards/tkc/tkl_ab87/readme.md +27 -0
@@ 0,0 1,27 @@
+# TKC TKL A/B87
+
+
+
+A fairly typical TKL
+
+* Keyboard Maintainer: [TerryMathews](https://github.com/TerryMathews)
+* Hardware Supported: TKC TKL A/B87 PCB
+* Hardware Availability: TBA
+
+
+Reset board in one of two ways:
+
+ 1) Short reset header to right of up arrow key
+
+
+ 2) Hold down Esc key while plugging in USB-C
+
+Make example for this keyboard (after setting up your build environment):
+
+ make tkc/tkl_ab87:default
+
+Flashing example for this keyboard:
+
+ make tkc/tkl_ab87:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
A keyboards/tkc/tkl_ab87/rules.mk => keyboards/tkc/tkl_ab87/rules.mk +22 -0
@@ 0,0 1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no # Enable Bluetooth
+AUDIO_ENABLE = no # Audio output
A keyboards/tkc/tkl_ab87/tkl_ab87.c => keyboards/tkc/tkl_ab87/tkl_ab87.c +16 -0
@@ 0,0 1,16 @@
+/* Copyright 2020 Terry Mathews
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "tkl_ab87.h"
A keyboards/tkc/tkl_ab87/tkl_ab87.h => keyboards/tkc/tkl_ab87/tkl_ab87.h +42 -0
@@ 0,0 1,42 @@
+/* Copyright 2020 Terry Mathews
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_all( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K0F, K56, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K0D, K1D, K1E, K1F, K55, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K54, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+ K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4F, \
+ K50, K51, K52, K57, K5A, K5B, K5C, K5D, K5E, K5F, K53 \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,KC_NO,KC_NO }, \
+ { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D,KC_NO,K4F }, \
+ { K50, K51, K52, K53, K54, K55, K56, K57, KC_NO,KC_NO,K5A, K5B, K5C, K5D, K5E, K5F }, \
+}