A keyboards/idb_60/config.h => keyboards/idb_60/config.h +170 -0
@@ 0,0 1,170 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x6060 // 24672
+#define PRODUCT_ID 0x6060 // 24672
+#define DEVICE_VER 0x0001
+#define MANUFACTURER pngu
+#define PRODUCT idb 60
+#define DESCRIPTION QMK keyboard firmware for idb 60
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { C2, D0, D1, D2, D3, D4, D5, D6, B0, B1 }
+#define MATRIX_COL_PINS { B2, B3, B4, C6, B6, B7, C7, B5 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 0
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
+
+// Dynamic keymap starts after EEPROM version
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
+// Dynamic macro starts after dynamic keymaps (35+(4*10*6*2)) = (35+480)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 675 // **** CHANGE THIS BASED ON MATRIX_ROWS & MATRIX_COLS ****
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 349 // **** CHANGE THIS BASED ON 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR ****
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
A keyboards/idb_60/idb_60.c => keyboards/idb_60/idb_60.c +23 -0
@@ 0,0 1,23 @@
+#include "idb_60.h"
+
+extern inline void _idb_60_caps_led_on(void);
+extern inline void _idb_60_esc_led_on(void);
+
+extern inline void _idb_60_caps_led_off(void);
+extern inline void _idb_60_esc_led_off(void);
+
+void keyboard_pre_init_kb(void) {
+ setPinOutput(C4);
+ setPinOutput(C5);
+}
+
+void led_set_kb(uint8_t usb_led) {
+
+ if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+ _idb_60_caps_led_on();
+ } else {
+ _idb_60_caps_led_off();
+ }
+
+ led_set_user(usb_led);
+}
A keyboards/idb_60/idb_60.h => keyboards/idb_60/idb_60.h +38 -0
@@ 0,0 1,38 @@
+#pragma once
+
+#include "quantum.h"
+
+inline void _idb_60_caps_led_on(void) {
+ writePinLow(C5);
+}
+
+inline void _idb_60_esc_led_on(void) {
+ writePinLow(C4);
+}
+
+inline void _idb_60_caps_led_off(void) {
+ writePinLow(C5);
+}
+
+inline void _idb_60_esc_led_off(void) {
+ writePinLow(C4);
+}
+
+#define LAYOUT( \
+ K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K07,\
+ K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36,\
+ K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K56,\
+ K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K66, K76,\
+ K80, K90, K81, K93, K95, K86, K96\
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07 }, \
+ { K10, K11, K12, K13, K14, K15, K16 }, \
+ { K20, K21, K22, K23, K24, K25, K26 }, \
+ { K30, K31, K32, K33, K34, K35, K36 }, \
+ { K40, K41, K42, K43, K44, K45, KC_NO }, \
+ { K50, K51, K52, K53, K54, K55, K56 }, \
+ { K60, K61, K62, K63, K64, K65, K66 }, \
+ { K70, K71, K72, K73, K74, K75, K76 }, \
+ { K80, K81, KC_NO, KC_NO, KC_NO, KC_NO, K86 }, \
+ { K90, KC_NO, KC_NO, K93, KC_NO, K95, K96 } \
+}
A keyboards/idb_60/info.json => keyboards/idb_60/info.json +76 -0
@@ 0,0 1,76 @@
+{
+ "keyboard_name": "idb_60",
+ "url": "https://idb-keyboards.xyz/60",
+ "maintainer": "pngu",
+ "width": 15,
+ "height": 5,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {"label":"Esc","x":0,"y":0},
+ {"label":"!\n1","x":1,"y":0},
+ {"label":"@\n2","x":2,"y":0},
+ {"label":"#\n3","x":3,"y":0},
+ {"label":"$\n4","x":4,"y":0},
+ {"label":"%\n5","x":5,"y":0},
+ {"label":"^\n6","x":6,"y":0},
+ {"label":"&\n7","x":7,"y":0},
+ {"label":"*\n8","x":8,"y":0},
+ {"label":"(\n9","x":9,"y":0},
+ {"label":")\n0","x":10,"y":0},
+ {"label":"_\n-","x":11,"y":0},
+ {"label":"+\n=","x":12,"y":0},
+ {"label":"BS","x":13,"y":0},
+ {"label":"~\n`","x":14,"y":0},
+ {"label":"Tab","x":0,"y":1,"w":1.5},
+ {"label":"Q","x":1.5,"y":1},
+ {"label":"W","x":2.5,"y":1},
+ {"label":"E","x":3.5,"y":1},
+ {"label":"R","x":4.5,"y":1},
+ {"label":"T","x":5.5,"y":1},
+ {"label":"Y","x":6.5,"y":1},
+ {"label":"U","x":7.5,"y":1},
+ {"label":"I","x":8.5,"y":1},
+ {"label":"O","x":9.5,"y":1},
+ {"label":"P","x":10.5,"y":1},
+ {"label":"{\n[","x":11.5,"y":1},
+ {"label":"}\n]","x":12.5,"y":1},
+ {"label":"|\n\\","x":13.5,"y":1,"w":1.5},
+ {"label":"Caps Lock","x":0,"y":2,"w":1.75},
+ {"label":"A","x":1.75,"y":2},
+ {"label":"S","x":2.75,"y":2},
+ {"label":"D","x":3.75,"y":2},
+ {"label":"F","x":4.75,"y":2},
+ {"label":"G","x":5.75,"y":2},
+ {"label":"H","x":6.75,"y":2},
+ {"label":"J","x":7.75,"y":2},
+ {"label":"K","x":8.75,"y":2},
+ {"label":"L","x":9.75,"y":2},
+ {"label":":\n;","x":10.75,"y":2},
+ {"label":"\"\n'","x":11.75,"y":2},
+ {"label":"Enter","x":12.75,"y":2,"w":2.25},
+ {"label":"Shift","x":0,"y":3,"w":1.25},
+ {"label":">\n<\n\n|","x":1.25,"y":3},
+ {"label":"Z","x":2.25,"y":3},
+ {"label":"X","x":3.25,"y":3},
+ {"label":"C","x":4.25,"y":3},
+ {"label":"V","x":5.25,"y":3},
+ {"label":"B","x":6.25,"y":3},
+ {"label":"N","x":7.25,"y":3},
+ {"label":"M","x":8.25,"y":3},
+ {"label":"<\n,","x":9.25,"y":3},
+ {"label":">\n.","x":10.25,"y":3},
+ {"label":"?\n/","x":11.25,"y":3},
+ {"label":"Shift","x":12.25,"y":3,"w":1.75},
+ {"label":"Fn","x":14,"y":3},
+ {"label":"Ctrl","x":0,"y":4,"w":1.5},
+ {"label":"Win","x":1.5,"y":4},
+ {"label":"Alt","x":2.5,"y":4,"w":1.5},
+ {"label":"","x":4,"y":4,"w":7},
+ {"label":"Alt","x":11,"y":4,"w":1.5},
+ {"label":"Win","x":12.5,"y":4},
+ {"label":"Ctrl","x":13.5,"y":4,"w":1.5}
+ ]
+ }
+ }
+}
A keyboards/idb_60/keymaps/default/keymap.c => keyboards/idb_60/keymaps/default/keymap.c +32 -0
@@ 0,0 1,32 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [0] = LAYOUT(
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NO,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_MENU, KC_RCTL
+ ),
+ [1] = LAYOUT(
+ RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______
+ )
+
+};
+
+// Layer LED indicators
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+ if (layer_state_cmp(state, 1)) {
+ _idb_60_esc_led_on();
+ } else {
+ _idb_60_esc_led_off();
+ }
+
+ return state;
+}<
\ No newline at end of file
A keyboards/idb_60/keymaps/pngu/keymap.c => keyboards/idb_60/keymaps/pngu/keymap.c +39 -0
@@ 0,0 1,39 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [0] = LAYOUT(
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NO,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Z, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+ LT(2, KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_NUBS, KC_Y, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_MENU, MO(1)
+ ),
+ [1] = LAYOUT(
+ RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______
+ ),
+ [2] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______
+ )
+
+};
+
+// Layer LED indicators
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+ if (layer_state_cmp(state, 1)) {
+ _idb_60_esc_led_on();
+ } else {
+ _idb_60_esc_led_off();
+ }
+
+ return state;
+}<
\ No newline at end of file
A keyboards/idb_60/readme.md => keyboards/idb_60/readme.md +17 -0
@@ 0,0 1,17 @@
+# idb 60 PCB
+
+Firmware for the idb 60 PCB
+
+Keyboard Maintainer: [/u/omgitspngu](https://github.com/itspngu)
+Hardware Supported: idb 60 PCB
+Hardware Availability: [/u/omgitspngu](https://www.reddit.com/user/omgitspngu/)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make idb_60:default
+
+Or to make and flash:
+
+ make idb_60:default:dfu
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
A keyboards/idb_60/rules.mk => keyboards/idb_60/rules.mk +65 -0
@@ 0,0 1,65 @@
+# MCU name
+MCU = atmega32u2
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+# comment out to disable the options.
+#
+# BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+# MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+# EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+# CONSOLE_ENABLE = yes # Console for debug(+400)
+# COMMAND_ENABLE = yes # Commands for debug and configuration
+# KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+# MIDI_ENABLE = YES # MIDI controls
+# UNICODE_ENABLE = YES # Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID<
\ No newline at end of file