M keyboards/0xcb/1337/config.h => keyboards/0xcb/1337/config.h +0 -1
@@ 24,7 24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/0xcb/1337/info.json => keyboards/0xcb/1337/info.json +3 -0
@@ 21,6 21,9 @@
"qmk_lufa_bootloader": {
"led": "B0"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/0xcb/tutelpad/config.h => keyboards/0xcb/tutelpad/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 10 // The number of steps to cycle through the hue by
#define RGBLIGHT_SAT_STEP 17 // The number of steps to increment the saturation by
#define RGBLIGHT_VAL_STEP 17 // The number of steps to increment the brightness by
-#define RGBLIGHT_SLEEP // RGB will switch off when host goes to sleep
#define RGBLIGHT_EFFECT_BREATHING // Enable all additional RGB animation modes
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/0xcb/tutelpad/info.json => keyboards/0xcb/tutelpad/info.json +3 -0
@@ 11,6 11,9 @@
"bootmagic": {
"matrix": [1, 0]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/1upkeyboards/1up60hse/config.h => keyboards/1upkeyboards/1up60hse/config.h +0 -1
@@ 31,7 31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/1upkeyboards/1up60hse/info.json => keyboards/1upkeyboards/1up60hse/info.json +3 -0
@@ 18,6 18,9 @@
"levels": 5,
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F0"
},
M keyboards/1upkeyboards/super16/config.h => keyboards/1upkeyboards/super16/config.h +0 -1
@@ 23,7 23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/1upkeyboards/super16/info.json => keyboards/1upkeyboards/super16/info.json +3 -0
@@ 11,6 11,9 @@
"ws2812": {
"pin": "D3"
},
+ "rgblight": {
+ "sleep": true
+ },
"rgb_matrix": {
"driver": "WS2812"
},
M keyboards/25keys/aleth42/rev0/config.h => keyboards/25keys/aleth42/rev0/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/25keys/aleth42/rev0/info.json => keyboards/25keys/aleth42/rev0/info.json +3 -0
@@ 13,6 13,9 @@
{"pin_a": "B5", "pin_b": "B4"}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "C7"
},
M keyboards/25keys/aleth42/rev1/config.h => keyboards/25keys/aleth42/rev1/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/25keys/aleth42/rev1/info.json => keyboards/25keys/aleth42/rev1/info.json +3 -0
@@ 13,6 13,9 @@
{"pin_a": "F5", "pin_b": "F6"}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B3"
},
M keyboards/25keys/cassette42/config.h => keyboards/25keys/cassette42/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/25keys/cassette42/info.json => keyboards/25keys/cassette42/info.json +3 -0
@@ 14,6 14,9 @@
{"pin_a": "B3", "pin_b": "B1"}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/abacus/config.h => keyboards/abacus/config.h +0 -1
@@ 23,7 23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== choose animations ==*/
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/abacus/info.json => keyboards/abacus/info.json +3 -0
@@ 18,6 18,9 @@
{"pin_a": "F1", "pin_b": "F0"}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D1"
},
M keyboards/abstract/ellipse/rev1/config.h => keyboards/abstract/ellipse/rev1/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/abstract/ellipse/rev1/info.json => keyboards/abstract/ellipse/rev1/info.json +3 -0
@@ 24,6 24,9 @@
"pin": "C6",
"levels": 15
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E6"
},
M keyboards/acekeyboard/titan60/config.h => keyboards/acekeyboard/titan60/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/acekeyboard/titan60/info.json => keyboards/acekeyboard/titan60/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B7",
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D0"
},
M keyboards/acheron/elongate/beta/config.h => keyboards/acheron/elongate/beta/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/acheron/elongate/beta/info.json => keyboards/acheron/elongate/beta/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x454C",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D7"
},
M keyboards/acheron/elongate/delta/config.h => keyboards/acheron/elongate/delta/config.h +0 -1
@@ 22,7 22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define BACKLIGHT_PAL_MODE 1
#define RGBLED_NUM 16
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/acheron/elongate/delta/info.json => keyboards/acheron/elongate/delta/info.json +2 -1
@@ 20,7 20,8 @@
"breathing_period": 3
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"ws2812": {
"pin": "B15"
M keyboards/ada/ada1800mini/config.h => keyboards/ada/ada1800mini/config.h +0 -1
@@ 21,7 21,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/ada/ada1800mini/info.json => keyboards/ada/ada1800mini/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "F0"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"matrix_pins": {
"cols": ["F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "B3", "B2", "B1"],
M keyboards/ada/infinity81/config.h => keyboards/ada/infinity81/config.h +0 -1
@@ 7,7 7,6 @@
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/ada/infinity81/info.json => keyboards/ada/infinity81/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0081",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D0"
},
M keyboards/adpenrose/kintsugi/config.h => keyboards/adpenrose/kintsugi/config.h +0 -1
@@ 24,7 24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/adpenrose/kintsugi/info.json => keyboards/adpenrose/kintsugi/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0001",
"device_version": "1.0.0"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F1"
},
M keyboards/adpenrose/obi/config.h => keyboards/adpenrose/obi/config.h +0 -1
@@ 10,7 10,6 @@
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/adpenrose/obi/info.json => keyboards/adpenrose/obi/info.json +3 -0
@@ 7,6 7,9 @@
"pid": "0x0002",
"vid": "0x4450"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F7"
},
M keyboards/ai03/polaris/config.h => keyboards/ai03/polaris/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/ai03/polaris/info.json => keyboards/ai03/polaris/info.json +2 -1
@@ 19,7 19,8 @@
"breathing": true
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"ws2812": {
"pin": "D2"
M keyboards/ai03/voyager60_alps/config.h => keyboards/ai03/voyager60_alps/config.h +0 -1
@@ 18,7 18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*
* Feature disable options
M keyboards/ai03/voyager60_alps/info.json => keyboards/ai03/voyager60_alps/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x060A",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D2"
},
M keyboards/alf/x11/config.h => keyboards/alf/x11/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/alf/x11/info.json => keyboards/alf/x11/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B7",
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F7"
},
M keyboards/alfredslab/swift65/hotswap/config.h => keyboards/alfredslab/swift65/hotswap/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/alfredslab/swift65/hotswap/info.json => keyboards/alfredslab/swift65/hotswap/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0xD4C4",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D2"
},
M keyboards/alfredslab/swift65/solder/config.h => keyboards/alfredslab/swift65/solder/config.h +0 -1
@@ 21,7 21,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/alfredslab/swift65/solder/info.json => keyboards/alfredslab/swift65/solder/info.json +2 -1
@@ 9,7 9,8 @@
"device_version": "0.0.1"
},
"rgblight": {
- "max_brightness": 100
+ "max_brightness": 100,
+ "sleep": true
},
"ws2812": {
"pin": "D2"
M keyboards/alpine65/config.h => keyboards/alpine65/config.h +0 -1
@@ 23,7 23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LOCKING_RESYNC_ENABLE
#define RGBLED_NUM 68
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/alpine65/info.json => keyboards/alpine65/info.json +2 -1
@@ 9,7 9,8 @@
"device_version": "0.0.1"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"ws2812": {
"pin": "B15"
M keyboards/amjkeyboard/amj60/config.h => keyboards/amjkeyboard/amj60/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 10
# define RGBLIGHT_SAT_STEP 17
# define RGBLIGHT_VAL_STEP 17
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/amjkeyboard/amj96/config.h => keyboards/amjkeyboard/amj96/config.h +0 -1
@@ 40,7 40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/anavi/macropad8/config.h => keyboards/anavi/macropad8/config.h +0 -3
@@ 17,9 17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define RGBLIGHT_SLEEP
-
-
/* ws2812B RGB LED */
#ifdef RGBLIGHT_ENABLE
# define RGBLIGHT_EFFECT_BREATHING
M keyboards/anavi/macropad8/info.json => keyboards/anavi/macropad8/info.json +3 -0
@@ 12,6 12,9 @@
"pin": "D7",
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F4"
},
M keyboards/atxkb/1894/config.h => keyboards/atxkb/1894/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/atxkb/1894/info.json => keyboards/atxkb/1894/info.json +3 -0
@@ 18,6 18,9 @@
"levels": 5,
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D2"
},
M keyboards/aves60/config.h => keyboards/aves60/config.h +0 -1
@@ 7,7 7,6 @@
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== or choose animations ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/bioi/f60/config.h => keyboards/bioi/f60/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/bioi/f60/info.json => keyboards/bioi/f60/info.json +3 -0
@@ 18,6 18,9 @@
"levels": 8,
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B1"
},
M keyboards/blackplum/config.h => keyboards/blackplum/config.h +0 -1
@@ 22,4 22,3 @@
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 10
#define RGBLIGHT_VAL_STEP 10
-#define RGBLIGHT_SLEEP
M keyboards/blackplum/info.json => keyboards/blackplum/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x4250",
"device_version": "10.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "C7"
},
M keyboards/bluebell/swoop/config.h => keyboards/bluebell/swoop/config.h +0 -1
@@ 32,4 32,3 @@
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
- #define RGBLIGHT_SLEEP
M keyboards/bluebell/swoop/info.json => keyboards/bluebell/swoop/info.json +1 -0
@@ 13,6 13,7 @@
},
"rgblight": {
"max_brightness": 150,
+ "sleep": true,
"split_count": [18, 18]
},
"matrix_pins": {
M keyboards/bolsa/bolsalice/config.h => keyboards/bolsa/bolsalice/config.h +0 -2
@@ 20,8 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/bolsa/bolsalice/info.json => keyboards/bolsa/bolsalice/info.json +3 -0
@@ 6,6 6,9 @@
"vid": "0x4253",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B1"
},
M keyboards/buildakb/potato65/config.h => keyboards/buildakb/potato65/config.h +0 -1
@@ 52,4 52,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
M keyboards/buildakb/potato65/info.json => keyboards/buildakb/potato65/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "B1"
},
"rgblight": {
- "max_brightness": 240
+ "max_brightness": 240,
+ "sleep": true
},
"matrix_pins": {
"cols": ["F6", "B0", "F1", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1", "D0"],
M keyboards/buildakb/potato65hs/config.h => keyboards/buildakb/potato65hs/config.h +0 -1
@@ 37,4 37,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP
M keyboards/buildakb/potato65hs/info.json => keyboards/buildakb/potato65hs/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "D5"
},
"rgblight": {
- "max_brightness": 240
+ "max_brightness": 240,
+ "sleep": true
},
"matrix_pins": {
"cols": ["D3", "D4", "D6", "D7", "B4", "B5", "B6", "F1", "B0", "B1", "B2", "B3", "B7", "D0", "D1"],
M keyboards/buildakb/potato65s/config.h => keyboards/buildakb/potato65s/config.h +0 -1
@@ 37,4 37,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP
M keyboards/buildakb/potato65s/info.json => keyboards/buildakb/potato65s/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "D5"
},
"rgblight": {
- "max_brightness": 240
+ "max_brightness": 240,
+ "sleep": true
},
"matrix_pins": {
"cols": ["D3", "D4", "D6", "D7", "B4", "B5", "B6", "F1", "B0", "B1", "B2", "B3", "B7", "D0", "D1"],
M keyboards/cablecardesigns/cypher/rev6/config.h => keyboards/cablecardesigns/cypher/rev6/config.h +0 -1
@@ 11,7 11,6 @@
#define RGBLIGHT_HUE_STEP 12
#define RGBLIGHT_SAT_STEP 25
#define RGBLIGHT_VAL_STEP 12
- #define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/cablecardesigns/cypher/rev6/info.json => keyboards/cablecardesigns/cypher/rev6/info.json +3 -0
@@ 18,6 18,9 @@
"levels": 5,
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D5"
},
M keyboards/canary/canary60rgb/info.json => keyboards/canary/canary60rgb/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0621",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B6"
},
M keyboards/canary/canary60rgb/v1/config.h => keyboards/canary/canary60rgb/v1/config.h +0 -1
@@ 29,7 29,6 @@
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP
#ifdef RGB_MATRIX_ENABLE
# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
M keyboards/cannonkeys/adelie/config.h => keyboards/cannonkeys/adelie/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/cannonkeys/adelie/info.json => keyboards/cannonkeys/adelie/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0005",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F0"
},
M keyboards/chalice/config.h => keyboards/chalice/config.h +0 -1
@@ 19,7 19,6 @@
#ifdef RGBLIGHT_ENABLE
#define RGBLED_NUM 14
- #define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/chalice/info.json => keyboards/chalice/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x000C",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/chlx/str_merro60/config.h => keyboards/chlx/str_merro60/config.h +0 -1
@@ 32,7 32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/chlx/str_merro60/info.json => keyboards/chlx/str_merro60/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0602",
"device_version": "1.0.0"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/ck60i/config.h => keyboards/ck60i/config.h +0 -1
@@ 27,7 27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LOCKING_RESYNC_ENABLE
#define RGBLED_NUM 16
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/ck60i/info.json => keyboards/ck60i/info.json +2 -1
@@ 24,7 24,8 @@
"breathing": true
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"ws2812": {
"pin": "B15"
M keyboards/cmm_studio/fuji65/config.h => keyboards/cmm_studio/fuji65/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/cmm_studio/fuji65/info.json => keyboards/cmm_studio/fuji65/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x364D",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E6"
},
M keyboards/contender/config.h => keyboards/contender/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/contender/info.json => keyboards/contender/info.json +1 -0
@@ 13,6 13,7 @@
},
"rgblight": {
"max_brightness": 32,
+ "sleep": true,
"led_map": [0, 1, 2, 3, 7, 6, 5, 4, 8, 9, 10, 11, 15, 14, 13, 12, 16, 17, 18, 19, 22, 21, 20, 25, 24, 23, 26, 27, 28, 29, 30, 31, 32]
},
"matrix_pins": {
M keyboards/coseyfannitutti/mullet/config.h => keyboards/coseyfannitutti/mullet/config.h +0 -1
@@ 31,7 31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
/*
* Feature disable options
M keyboards/coseyfannitutti/mullet/info.json => keyboards/coseyfannitutti/mullet/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x6969",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D5"
},
M keyboards/cozykeys/bloomer/config.h => keyboards/cozykeys/bloomer/config.h +0 -1
@@ 23,7 23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/cozykeys/bloomer/info.json => keyboards/cozykeys/bloomer/info.json +3 -0
@@ 7,6 7,9 @@
"vid": "0xFEED",
"pid": "0x1191"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D7"
}
M keyboards/cozykeys/speedo/v3/config.h => keyboards/cozykeys/speedo/v3/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/cozykeys/speedo/v3/info.json => keyboards/cozykeys/speedo/v3/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x1192",
"device_version": "0.0.3"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B5"
},
M keyboards/craftwalk/config.h => keyboards/craftwalk/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== or choose animations ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/craftwalk/info.json => keyboards/craftwalk/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x2E8F",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/crazy_keyboard_68/config.h => keyboards/crazy_keyboard_68/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/crazy_keyboard_68/info.json => keyboards/crazy_keyboard_68/info.json +3 -0
@@ 17,6 17,9 @@
"caps_lock": "B0",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F6"
},
M keyboards/delikeeb/flatbread60/config.h => keyboards/delikeeb/flatbread60/config.h +0 -2
@@ 21,8 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/delikeeb/flatbread60/info.json => keyboards/delikeeb/flatbread60/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F7"
},
M keyboards/delikeeb/vaguettelite/config.h => keyboards/delikeeb/vaguettelite/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// # define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/delikeeb/vaguettelite/info.json => keyboards/delikeeb/vaguettelite/info.json +3 -0
@@ 19,6 19,9 @@
{"pin_a": "F1", "pin_b": "F0"}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "C7"
},
M keyboards/delikeeb/vanana/rev1/config.h => keyboards/delikeeb/vanana/rev1/config.h +0 -1
@@ 23,7 23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
//# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/delikeeb/vanana/rev1/info.json => keyboards/delikeeb/vanana/rev1/info.json +3 -0
@@ 3,6 3,9 @@
"usb": {
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F0"
},
M keyboards/delikeeb/vanana/rev2/config.h => keyboards/delikeeb/vanana/rev2/config.h +0 -1
@@ 23,7 23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
//# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/delikeeb/vanana/rev2/info.json => keyboards/delikeeb/vanana/rev2/info.json +3 -0
@@ 3,6 3,9 @@
"usb": {
"device_version": "0.0.2"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "C7"
},
M keyboards/delikeeb/waaffle/rev3/config.h => keyboards/delikeeb/waaffle/rev3/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// # define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/delikeeb/waaffle/rev3/info.json => keyboards/delikeeb/waaffle/rev3/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0012",
"device_version": "0.0.3"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "C7"
},
M keyboards/draculad/config.h => keyboards/draculad/config.h +0 -1
@@ 30,7 30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
#define EE_HANDS
M keyboards/draculad/info.json => keyboards/draculad/info.json +1 -0
@@ 9,6 9,7 @@
"device_version": "0.0.1"
},
"rgblight": {
+ "sleep": true,
"split": true
},
"ws2812": {
M keyboards/draytronics/daisy/config.h => keyboards/draytronics/daisy/config.h +0 -1
@@ 43,7 43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/draytronics/daisy/info.json => keyboards/draytronics/daisy/info.json +3 -0
@@ 19,6 19,9 @@
{"pin_a": "D0", "pin_b": "D1"}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D4"
},
M keyboards/draytronics/elise/config.h => keyboards/draytronics/elise/config.h +0 -1
@@ 28,7 28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/draytronics/elise/info.json => keyboards/draytronics/elise/info.json +3 -0
@@ 13,6 13,9 @@
"rows": ["B2", "B3", "B1", "F0", "F1"]
},
"diode_direction": "COL2ROW",
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D1"
},
M keyboards/draytronics/elise_v2/config.h => keyboards/draytronics/elise_v2/config.h +0 -1
@@ 28,7 28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/draytronics/elise_v2/info.json => keyboards/draytronics/elise_v2/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x454C",
"device_version": "2.0.0"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D1"
},
M keyboards/dz60/config.h => keyboards/dz60/config.h +0 -1
@@ 14,7 14,6 @@
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/dz60/info.json => keyboards/dz60/info.json +3 -0
@@ 21,6 21,9 @@
"caps_lock": "B2",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/dztech/bocc/config.h => keyboards/dztech/bocc/config.h +0 -1
@@ 29,7 29,6 @@
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/dztech/bocc/info.json => keyboards/dztech/bocc/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B7",
"levels": 5
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/dztech/duo_s/config.h => keyboards/dztech/duo_s/config.h +0 -1
@@ 32,7 32,6 @@
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 10
#define RGBLIGHT_VAL_STEP 10
-#define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/dztech/duo_s/info.json => keyboards/dztech/duo_s/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x1012",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B15"
},
M keyboards/ealdin/quadrant/config.h => keyboards/ealdin/quadrant/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/ealdin/quadrant/info.json => keyboards/ealdin/quadrant/info.json +3 -0
@@ 18,6 18,9 @@
{"pin_a": "D5", "pin_b": "F1"}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "C7"
},
M keyboards/ebastler/isometria_75/rev1/config.h => keyboards/ebastler/isometria_75/rev1/config.h +0 -1
@@ 30,7 30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define WS2812_PWM_PAL_MODE 2
#define WS2812_DMA_STREAM STM32_DMA1_STREAM2
#define WS2812_DMA_CHANNEL 2
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/ebastler/isometria_75/rev1/info.json => keyboards/ebastler/isometria_75/rev1/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x1337",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B3",
"driver": "pwm"
M keyboards/eek/config.h => keyboards/eek/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 4
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/eek/info.json => keyboards/eek/info.json +2 -1
@@ 20,7 20,8 @@
"pin": "D3"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "qmk-dfu",
M keyboards/ein_60/config.h => keyboards/ein_60/config.h +0 -1
@@ 33,7 33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 4
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/ein_60/info.json => keyboards/ein_60/info.json +2 -1
@@ 12,7 12,8 @@
"driver": "WS2812"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"matrix_pins": {
"cols": ["A3", "A2", "A1", "A0", "F6", "F5", "F0", "E0", "E1", "C0", "C1", "C2", "C3"],
M keyboards/ergodox_ez/config.h => keyboards/ergodox_ez/config.h +0 -2
@@ 94,8 94,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBW
-#define RGBLIGHT_SLEEP
-
/*
* The debounce filtering reports a key/switch change directly,
* without any extra delay. After that the debounce logic will filter
M keyboards/ergodox_ez/info.json => keyboards/ergodox_ez/info.json +3 -0
@@ 6,6 6,9 @@
"vid": "0x3297",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D7"
},
M keyboards/eternal_keypad/config.h => keyboards/eternal_keypad/config.h +0 -1
@@ 18,7 18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
#define RGBLED_NUM 8
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/eternal_keypad/info.json => keyboards/eternal_keypad/info.json +3 -0
@@ 16,6 16,9 @@
"bootmagic": {
"matrix": [0, 1]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/evolv/config.h => keyboards/evolv/config.h +0 -1
@@ 23,7 23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LOCKING_RESYNC_ENABLE
#define RGBLED_NUM 16
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/evolv/info.json => keyboards/evolv/info.json +2 -1
@@ 22,7 22,8 @@
"pin": "B15"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "STM32F072",
"bootloader": "stm32-dfu",
M keyboards/exclusive/e7v1se/config.h => keyboards/exclusive/e7v1se/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/exclusive/e7v1se/info.json => keyboards/exclusive/e7v1se/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B7",
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/exclusive/e85/config.h => keyboards/exclusive/e85/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/exclusive/e85/hotswap/info.json => keyboards/exclusive/e85/hotswap/info.json +3 -0
@@ 18,6 18,9 @@
"levels": 6,
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/exclusive/e85/soldered/info.json => keyboards/exclusive/e85/soldered/info.json +3 -0
@@ 18,6 18,9 @@
"levels": 6,
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/eyeohdesigns/babyv/config.h => keyboards/eyeohdesigns/babyv/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/eyeohdesigns/babyv/info.json => keyboards/eyeohdesigns/babyv/info.json +3 -0
@@ 16,6 16,9 @@
"backlight": {
"pin": "B6"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B7"
},
M keyboards/eyeohdesigns/theboulevard/config.h => keyboards/eyeohdesigns/theboulevard/config.h +0 -1
@@ 21,5 21,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
M keyboards/eyeohdesigns/theboulevard/info.json => keyboards/eyeohdesigns/theboulevard/info.json +3 -0
@@ 18,6 18,9 @@
{"pin_a": "F5", "pin_b": "F4", "resolution": 2}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F6"
},
M keyboards/flx/virgo/config.h => keyboards/flx/virgo/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/flx/virgo/info.json => keyboards/flx/virgo/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B7",
"levels": 5
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B3"
},
M keyboards/foxlab/key65/hotswap/config.h => keyboards/foxlab/key65/hotswap/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/foxlab/key65/hotswap/info.json => keyboards/foxlab/key65/hotswap/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B7",
"levels": 5
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/foxlab/key65/universal/config.h => keyboards/foxlab/key65/universal/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/foxlab/key65/universal/info.json => keyboards/foxlab/key65/universal/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B7",
"levels": 5
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/foxlab/leaf60/hotswap/config.h => keyboards/foxlab/leaf60/hotswap/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/foxlab/leaf60/hotswap/info.json => keyboards/foxlab/leaf60/hotswap/info.json +3 -0
@@ 22,6 22,9 @@
"caps_lock": "E6",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/foxlab/leaf60/universal/config.h => keyboards/foxlab/leaf60/universal/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/foxlab/leaf60/universal/info.json => keyboards/foxlab/leaf60/universal/info.json +3 -0
@@ 21,6 21,9 @@
"caps_lock": "E6",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/foxlab/time80/config.h => keyboards/foxlab/time80/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define RGBLIGHT_HUE_STEP 8
//#define RGBLIGHT_SAT_STEP 8
//#define RGBLIGHT_VAL_STEP 8
-//#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/foxlab/time_re/hotswap/config.h => keyboards/foxlab/time_re/hotswap/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/foxlab/time_re/hotswap/info.json => keyboards/foxlab/time_re/hotswap/info.json +2 -1
@@ 24,7 24,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/foxlab/time_re/universal/config.h => keyboards/foxlab/time_re/universal/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/foxlab/time_re/universal/info.json => keyboards/foxlab/time_re/universal/info.json +2 -1
@@ 20,7 20,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"indicators": {
"caps_lock": "E6",
M keyboards/frooastboard/nano/config.h => keyboards/frooastboard/nano/config.h +0 -2
@@ 18,8 18,6 @@
#define RGBLED_NUM 8
-#define RGBLIGHT_SLEEP
-
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
M keyboards/frooastboard/nano/info.json => keyboards/frooastboard/nano/info.json +3 -0
@@ 24,6 24,9 @@
"pid": "0x6F21",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B4"
},
M keyboards/ft/mars65/config.h => keyboards/ft/mars65/config.h +0 -1
@@ 7,7 7,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/ft/mars65/info.json => keyboards/ft/mars65/info.json +2 -1
@@ 20,7 20,8 @@
"pin": "E6"
},
"rgblight": {
- "max_brightness": 130
+ "max_brightness": 130,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/gh60/v1p3/config.h => keyboards/gh60/v1p3/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/gh60/v1p3/info.json => keyboards/gh60/v1p3/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B6",
"levels": 15
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F0"
},
M keyboards/gkeyboard/gkb_m16/config.h => keyboards/gkeyboard/gkb_m16/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/gkeyboard/gkb_m16/info.json => keyboards/gkeyboard/gkb_m16/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x4201",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F1"
},
M keyboards/gray_studio/aero75/config.h => keyboards/gray_studio/aero75/config.h +0 -1
@@ 9,7 9,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/gray_studio/aero75/info.json => keyboards/gray_studio/aero75/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "B10"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"matrix_pins": {
"cols": ["A3", "A5", "A4", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "B1", "A8", "B15", "B14", "B13"],
M keyboards/gray_studio/apollo80/config.h => keyboards/gray_studio/apollo80/config.h +0 -2
@@ 20,8 20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-
#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_MOOD
/*== or choose animations ==*/
#define RGBLIGHT_EFFECT_BREATHING
M keyboards/gray_studio/apollo80/info.json => keyboards/gray_studio/apollo80/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 180
+ "max_brightness": 180,
+ "sleep": true
},
"matrix_pins": {
"cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D4", "D6", "D2", "D3", "D5"],
M keyboards/gray_studio/cod67/config.h => keyboards/gray_studio/cod67/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/gray_studio/cod67/info.json => keyboards/gray_studio/cod67/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x1000",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B2"
},
M keyboards/gray_studio/space65/config.h => keyboards/gray_studio/space65/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/gray_studio/space65/info.json => keyboards/gray_studio/space65/info.json +3 -0
@@ 18,6 18,9 @@
"levels": 5,
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/gray_studio/space65r3/config.h => keyboards/gray_studio/space65r3/config.h +0 -1
@@ 8,7 8,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/gray_studio/space65r3/info.json => keyboards/gray_studio/space65r3/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "B10"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"matrix_pins": {
"cols": ["A3", "A5", "A4", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15", "B0", "A8", "B15", "B14", "B13"],
M keyboards/gray_studio/think65/hotswap/config.h => keyboards/gray_studio/think65/hotswap/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/gray_studio/think65/hotswap/info.json => keyboards/gray_studio/think65/hotswap/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x4001",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/gray_studio/think65/solder/config.h => keyboards/gray_studio/think65/solder/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/gray_studio/think65/solder/info.json => keyboards/gray_studio/think65/solder/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x4000",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/grid600/press/config.h => keyboards/grid600/press/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/grid600/press/info.json => keyboards/grid600/press/info.json +3 -0
@@ 12,6 12,9 @@
"cols": ["F1", "F4", "F5", "F6"],
"rows": ["F0"]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B6"
},
M keyboards/halfcliff/config.h => keyboards/halfcliff/config.h +0 -1
@@ 29,7 29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/halfcliff/info.json => keyboards/halfcliff/info.json +1 -0
@@ 17,6 17,7 @@
"soft_serial_pin": "D2"
},
"rgblight": {
+ "sleep": true,
"split_count": [5, 5]
},
"ws2812": {
M keyboards/halokeys/elemental75/config.h => keyboards/halokeys/elemental75/config.h +0 -1
@@ 18,7 18,6 @@
#define TAP_CODE_DELAY 10 // tap_code function delay for register and unregister
#define RGBLED_NUM 22
-#define RGBLIGHT_SLEEP
/* animations enabled */
#define RGBLIGHT_EFFECT_BREATHING
M keyboards/halokeys/elemental75/info.json => keyboards/halokeys/elemental75/info.json +2 -1
@@ 22,7 22,8 @@
"pin": "A10"
},
"rgblight": {
- "max_brightness": 225
+ "max_brightness": 225,
+ "sleep": true
},
"processor": "STM32F303",
"bootloader": "stm32-dfu",
M keyboards/handwired/6macro/config.h => keyboards/handwired/6macro/config.h +0 -1
@@ 22,7 22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/handwired/bento/rev1/config.h => keyboards/handwired/bento/rev1/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/handwired/bento/rev1/info.json => keyboards/handwired/bento/rev1/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0xDAD3",
"device_version": "1.0.0"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/handwired/consolekeyboard/18key/config.h => keyboards/handwired/consolekeyboard/18key/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/handwired/consolekeyboard/18key/info.json => keyboards/handwired/consolekeyboard/18key/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x3332",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F4"
},
M keyboards/handwired/consolekeyboard/20key/config.h => keyboards/handwired/consolekeyboard/20key/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/handwired/consolekeyboard/20key/info.json => keyboards/handwired/consolekeyboard/20key/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x3432",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F4"
},
M keyboards/handwired/consolekeyboard/27key/config.h => keyboards/handwired/consolekeyboard/27key/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/handwired/consolekeyboard/27key/info.json => keyboards/handwired/consolekeyboard/27key/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x3433",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F4"
},
M keyboards/handwired/consolekeyboard/30key/config.h => keyboards/handwired/consolekeyboard/30key/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/handwired/consolekeyboard/30key/info.json => keyboards/handwired/consolekeyboard/30key/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x3433",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F4"
},
M keyboards/handwired/croxsplit44/config.h => keyboards/handwired/croxsplit44/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/handwired/croxsplit44/info.json => keyboards/handwired/croxsplit44/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x6146",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "C4"
},
M keyboards/handwired/freoduo/config.h => keyboards/handwired/freoduo/config.h +0 -1
@@ 32,7 32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_HUE_STEP 16
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
M keyboards/handwired/freoduo/info.json => keyboards/handwired/freoduo/info.json +1 -0
@@ 17,6 17,7 @@
"soft_serial_pin": "D0"
},
"rgblight": {
+ "sleep": true,
"led_map": [15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30],
"split_count": [16, 14]
},
M keyboards/handwired/heisenberg/config.h => keyboards/handwired/heisenberg/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/handwired/macroboard/config.h => keyboards/handwired/macroboard/config.h +0 -1
@@ 28,7 28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/handwired/macroboard/info.json => keyboards/handwired/macroboard/info.json +1 -0
@@ 9,6 9,7 @@
"device_version": "0.0.1"
},
"rgblight": {
+ "sleep": true,
"led_map": [0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 23, 21, 19, 17, 15, 13, 11, 9, 7, 5, 3, 1]
},
"ws2812": {
M keyboards/handwired/marauder/config.h => keyboards/handwired/marauder/config.h +0 -1
@@ 22,4 22,3 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
M keyboards/handwired/marauder/info.json => keyboards/handwired/marauder/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/handwired/owlet60/config.h => keyboards/handwired/owlet60/config.h +0 -1
@@ 44,7 44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/handwired/owlet60/info.json => keyboards/handwired/owlet60/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "D0"
},
"rgblight": {
- "max_brightness": 128
+ "max_brightness": 128,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "caterina",
M keyboards/handwired/tennie/config.h => keyboards/handwired/tennie/config.h +0 -1
@@ 22,7 22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/handwired/traveller/config.h => keyboards/handwired/traveller/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 10
# define RGBLIGHT_SAT_STEP 17
# define RGBLIGHT_VAL_STEP 17
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*
* Feature disable options
M keyboards/helix/rev3_4rows/config.h => keyboards/helix/rev3_4rows/config.h +0 -1
@@ 67,7 67,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/helix/rev3_5rows/config.h => keyboards/helix/rev3_5rows/config.h +0 -1
@@ 67,7 67,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/hillside/46/0_1/config.h => keyboards/hillside/46/0_1/config.h +0 -2
@@ 8,8 8,6 @@
#define SPLIT_HAND_MATRIX_GRID B5, F6
#define MATRIX_MASKED
-#define RGBLIGHT_SLEEP
-
/* Haptic hardware */
// The Pimoroni is the likely hardware, for which these settings work
#define FB_ERM_LRA 1
M keyboards/hillside/46/0_1/info.json => keyboards/hillside/46/0_1/info.json +2 -1
@@ 36,7 36,8 @@
"split": true,
"hue_steps": 8,
"saturation_steps": 8,
- "brightness_steps": 8
+ "brightness_steps": 8,
+ "sleep": true
},
"ws2812": {
"pin": "D3"
M keyboards/hillside/48/0_1/config.h => keyboards/hillside/48/0_1/config.h +0 -2
@@ 3,8 3,6 @@
#pragma once
-#define RGBLIGHT_SLEEP
-
/* Haptic hardware */
// The Pimoroni is the likely hardware, for which these settings work
#define FB_ERM_LRA 1
M keyboards/hillside/48/0_1/info.json => keyboards/hillside/48/0_1/info.json +2 -1
@@ 37,7 37,8 @@
"split": true,
"hue_steps": 8,
"saturation_steps": 8,
- "brightness_steps": 8
+ "brightness_steps": 8,
+ "sleep": true
},
"ws2812": {
"pin": "D3"
M keyboards/hillside/52/0_1/config.h => keyboards/hillside/52/0_1/config.h +0 -2
@@ 8,8 8,6 @@
#define SPLIT_HAND_MATRIX_GRID B5, F6
#define MATRIX_MASKED
-#define RGBLIGHT_SLEEP
-
/* Haptic hardware */
// The Pimoroni is the likely hardware, for which these settings work
#define FB_ERM_LRA 1
M keyboards/hillside/52/0_1/info.json => keyboards/hillside/52/0_1/info.json +2 -1
@@ 36,7 36,8 @@
"split": true,
"hue_steps": 8,
"saturation_steps": 8,
- "brightness_steps": 8
+ "brightness_steps": 8,
+ "sleep": true
},
"ws2812": {
"pin": "D3"
M keyboards/hineybush/h08_ocelot/config.h => keyboards/hineybush/h08_ocelot/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/hineybush/h08_ocelot/info.json => keyboards/hineybush/h08_ocelot/info.json +2 -1
@@ 17,7 17,8 @@
"pin": "F1"
},
"rgblight": {
- "max_brightness": 220
+ "max_brightness": 220,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/hineybush/h60/config.h => keyboards/hineybush/h60/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/hineybush/h60/info.json => keyboards/hineybush/h60/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B7",
"levels": 12
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B0"
},
M keyboards/hineybush/h65/config.h => keyboards/hineybush/h65/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/hineybush/h65/info.json => keyboards/hineybush/h65/info.json +3 -0
@@ 20,6 20,9 @@
"indicators": {
"caps_lock": "E6"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D2"
},
M keyboards/hineybush/h65_hotswap/config.h => keyboards/hineybush/h65_hotswap/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/hineybush/h65_hotswap/info.json => keyboards/hineybush/h65_hotswap/info.json +3 -0
@@ 20,6 20,9 @@
"indicators": {
"caps_lock": "E6"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D2"
},
M keyboards/hineybush/h660s/config.h => keyboards/hineybush/h660s/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/hineybush/h660s/info.json => keyboards/hineybush/h660s/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B7",
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B0"
},
M keyboards/hineybush/h75_singa/config.h => keyboards/hineybush/h75_singa/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/hineybush/h75_singa/info.json => keyboards/hineybush/h75_singa/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B7",
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B3"
},
M keyboards/hineybush/h87a/config.h => keyboards/hineybush/h87a/config.h +0 -1
@@ 36,4 36,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP // RGB will turn off when PC is put to sleep
M keyboards/hineybush/h87a/info.json => keyboards/hineybush/h87a/info.json +2 -1
@@ 20,7 20,8 @@
"pin": "D3"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/hineybush/h88/config.h => keyboards/hineybush/h88/config.h +0 -1
@@ 36,4 36,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP // RGB will turn off when PC is put to sleep
M keyboards/hineybush/h88/info.json => keyboards/hineybush/h88/info.json +3 -0
@@ 16,6 16,9 @@
"backlight": {
"pin": "B7"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/hineybush/hbcp/config.h => keyboards/hineybush/hbcp/config.h +0 -1
@@ 42,7 42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/hineybush/hbcp/info.json => keyboards/hineybush/hbcp/info.json +2 -1
@@ 16,7 16,8 @@
"pin": "B0"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "at90usb1286",
"bootloader": "atmel-dfu",
M keyboards/hineybush/physix/config.h => keyboards/hineybush/physix/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/hineybush/physix/info.json => keyboards/hineybush/physix/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B7",
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E6"
},
M keyboards/hineybush/sm68/config.h => keyboards/hineybush/sm68/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/hineybush/sm68/info.json => keyboards/hineybush/sm68/info.json +3 -0
@@ 13,6 13,9 @@
"rows": ["B2", "B1", "B0", "D4", "D1"]
},
"diode_direction": "COL2ROW",
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D0"
},
M keyboards/hnahkb/vn66/config.h => keyboards/hnahkb/vn66/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/hnahkb/vn66/info.json => keyboards/hnahkb/vn66/info.json +3 -0
@@ 27,6 27,9 @@
"caps_lock": "E6",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/hp69/config.h => keyboards/hp69/config.h +0 -1
@@ 28,7 28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_SLEEP
#define AUDIO_PIN A5
#define AUDIO_PIN_ALT A4
M keyboards/hp69/info.json => keyboards/hp69/info.json +3 -0
@@ 17,6 17,9 @@
"caps_lock": "A6",
"scroll_lock": "A7"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "A3"
},
M keyboards/hub16/config.h => keyboards/hub16/config.h +0 -1
@@ 30,7 30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/hub16/info.json => keyboards/hub16/info.json +3 -0
@@ 14,6 14,9 @@
{"pin_a": "B5", "pin_b": "B4"}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D1"
},
M keyboards/hubble/config.h => keyboards/hubble/config.h +0 -1
@@ 6,7 6,6 @@
/* rgb */
#define RGBLED_NUM 7
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/hubble/info.json => keyboards/hubble/info.json +3 -0
@@ 14,6 14,9 @@
"rgblight": true,
"velocikey": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D2"
},
M keyboards/idobao/id80/v2/config.h => keyboards/idobao/id80/v2/config.h +0 -2
@@ 21,8 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_CHRISTMAS
M keyboards/idobao/id80/v2/info.json => keyboards/idobao/id80/v2/info.json +2 -1
@@ 19,7 19,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 180
+ "max_brightness": 180,
+ "sleep": true
},
"indicators": {
"caps_lock": "C7",
M keyboards/irene/config.h => keyboards/irene/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/jacky_studio/bear_65/config.h => keyboards/jacky_studio/bear_65/config.h +0 -2
@@ 24,5 24,3 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-/* If defined, the RGB lighting will be switched off when the host goes to sleep */
-#define RGBLIGHT_SLEEP
M keyboards/jacky_studio/bear_65/rev1/info.json => keyboards/jacky_studio/bear_65/rev1/info.json +2 -1
@@ 25,7 25,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"indicators": {
"caps_lock": "C7",
M keyboards/jacky_studio/bear_65/rev2/info.json => keyboards/jacky_studio/bear_65/rev2/info.json +2 -1
@@ 25,7 25,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"indicators": {
"caps_lock": "C7",
M keyboards/jacky_studio/s7_elephant/rev1/config.h => keyboards/jacky_studio/s7_elephant/rev1/config.h +0 -1
@@ 30,7 30,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/jacky_studio/s7_elephant/rev1/info.json => keyboards/jacky_studio/s7_elephant/rev1/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0007",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E6"
},
M keyboards/jacky_studio/s7_elephant/rev2/config.h => keyboards/jacky_studio/s7_elephant/rev2/config.h +0 -1
@@ 30,7 30,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/jacky_studio/s7_elephant/rev2/info.json => keyboards/jacky_studio/s7_elephant/rev2/info.json +3 -0
@@ 12,6 12,9 @@
"cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "F7", "F6", "F5", "F4", "F1", "F0", "E6"],
"rows": ["B0", "B1", "B2", "B3", "B7"]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/jels/jels88/config.h => keyboards/jels/jels88/config.h +0 -1
@@ 18,7 18,6 @@
#ifdef RGBLIGHT_ENABLE
#define RGBLED_NUM 20 // Number of LEDs
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/jels/jels88/info.json => keyboards/jels/jels88/info.json +2 -1
@@ 20,7 20,8 @@
"pin": "B6"
},
"rgblight": {
- "max_brightness": 225
+ "max_brightness": 225,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/jian/nsrev2/config.h => keyboards/jian/nsrev2/config.h +0 -2
@@ 33,8 33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_SLEEP
-
#ifndef IOS_DEVICE_ENABLE
#if RGBLED_NUM <= 6
#define RGBLIGHT_LIMIT_VAL 255
M keyboards/jian/nsrev2/info.json => keyboards/jian/nsrev2/info.json +1 -0
@@ 14,6 14,7 @@
"breathing": true
},
"rgblight": {
+ "sleep": true,
"split": true
},
"ws2812": {
M keyboards/jian/rev1/config.h => keyboards/jian/rev1/config.h +0 -3
@@ 85,9 85,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-
-#define RGBLIGHT_SLEEP
-
#ifndef IOS_DEVICE_ENABLE
#if RGBLED_NUM <= 6
#define RGBLIGHT_LIMIT_VAL 255
M keyboards/jian/rev1/info.json => keyboards/jian/rev1/info.json +1 -0
@@ 13,6 13,7 @@
"levels": 5
},
"rgblight": {
+ "sleep": true,
"split": true
},
"ws2812": {
M keyboards/jian/rev2/config.h => keyboards/jian/rev2/config.h +0 -2
@@ 37,8 37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_SLEEP
-
#ifndef IOS_DEVICE_ENABLE
#if RGBLED_NUM <= 6
#define RGBLIGHT_LIMIT_VAL 255
M keyboards/jian/rev2/info.json => keyboards/jian/rev2/info.json +1 -0
@@ 13,6 13,7 @@
"levels": 5
},
"rgblight": {
+ "sleep": true,
"split": true
},
"ws2812": {
M keyboards/jones/v03/config.h => keyboards/jones/v03/config.h +0 -1
@@ 52,7 52,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== Lighting Layers ==*/
#define RGBLIGHT_LAYERS
// #define RGBLIGHT_MAX_LAYERS 2
M keyboards/jones/v03_1/config.h => keyboards/jones/v03_1/config.h +0 -1
@@ 52,7 52,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== Lighting Layers ==*/
#define RGBLIGHT_LAYERS
// #define RGBLIGHT_MAX_LAYERS 2
M keyboards/kakunpc/angel17/rev1/config.h => keyboards/kakunpc/angel17/rev1/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/kakunpc/angel17/rev1/info.json => keyboards/kakunpc/angel17/rev1/info.json +3 -0
@@ 3,6 3,9 @@
"cols": ["F4", "F5", "F6", "F7", "B1"],
"rows": ["D4", "C6", "D7", "E6"]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/kakunpc/angel64/alpha/config.h => keyboards/kakunpc/angel64/alpha/config.h +0 -1
@@ 33,7 33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kakunpc/angel64/alpha/info.json => keyboards/kakunpc/angel64/alpha/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "D3"
},
"rgblight": {
- "max_brightness": 25
+ "max_brightness": 25,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/kakunpc/angel64/rev1/config.h => keyboards/kakunpc/angel64/rev1/config.h +0 -1
@@ 33,7 33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kakunpc/angel64/rev1/info.json => keyboards/kakunpc/angel64/rev1/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "D3"
},
"rgblight": {
- "max_brightness": 25
+ "max_brightness": 25,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/kakunpc/business_card/alpha/config.h => keyboards/kakunpc/business_card/alpha/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/kakunpc/business_card/alpha/info.json => keyboards/kakunpc/business_card/alpha/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/kakunpc/business_card/beta/config.h => keyboards/kakunpc/business_card/beta/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/kakunpc/business_card/beta/info.json => keyboards/kakunpc/business_card/beta/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/kakunpc/rabbit_capture_plan/config.h => keyboards/kakunpc/rabbit_capture_plan/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kakunpc/rabbit_capture_plan/info.json => keyboards/kakunpc/rabbit_capture_plan/info.json +1 -0
@@ 13,6 13,7 @@
},
"rgblight": {
"max_brightness": 200,
+ "sleep": true,
"split_count": [32, 37]
},
"matrix_pins": {
M keyboards/kakunpc/suihankey/alpha/config.h => keyboards/kakunpc/suihankey/alpha/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kakunpc/suihankey/alpha/info.json => keyboards/kakunpc/suihankey/alpha/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/kakunpc/suihankey/rev1/config.h => keyboards/kakunpc/suihankey/rev1/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kakunpc/suihankey/rev1/info.json => keyboards/kakunpc/suihankey/rev1/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/kakunpc/suihankey/split/alpha/config.h => keyboards/kakunpc/suihankey/split/alpha/config.h +0 -1
@@ 25,7 25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/kakunpc/suihankey/split/alpha/info.json => keyboards/kakunpc/suihankey/split/alpha/info.json +3 -0
@@ 1,4 1,7 @@
{
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/kakunpc/suihankey/split/rev1/config.h => keyboards/kakunpc/suihankey/split/rev1/config.h +0 -1
@@ 25,7 25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kakunpc/suihankey/split/rev1/info.json => keyboards/kakunpc/suihankey/split/rev1/info.json +3 -0
@@ 1,4 1,7 @@
{
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/kakunpc/thedogkeyboard/config.h => keyboards/kakunpc/thedogkeyboard/config.h +0 -1
@@ 39,7 39,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/kakunpc/thedogkeyboard/info.json => keyboards/kakunpc/thedogkeyboard/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "D3"
},
"rgblight": {
- "max_brightness": 50
+ "max_brightness": 50,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/kb_elmo/isolation/config.h => keyboards/kb_elmo/isolation/config.h +0 -1
@@ 22,7 22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kb_elmo/isolation/info.json => keyboards/kb_elmo/isolation/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x4EE6",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B2"
},
M keyboards/kb_elmo/noah_avr/config.h => keyboards/kb_elmo/noah_avr/config.h +0 -1
@@ 29,5 29,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
#define RGBLED_NUM 7
-#define RGBLIGHT_SLEEP // RGB will turn off when PC is put to sleep
#define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_BGR // RGB on the Noah is different order
M keyboards/kb_elmo/noah_avr/info.json => keyboards/kb_elmo/noah_avr/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x1DB0",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B5"
},
M keyboards/kbdfans/bounce/75/hotswap/config.h => keyboards/kbdfans/bounce/75/hotswap/config.h +0 -1
@@ 32,6 32,5 @@
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 10
#define RGBLIGHT_VAL_STEP 10
-#define RGBLIGHT_SLEEP
#define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2=
\ No newline at end of file
M keyboards/kbdfans/bounce/75/hotswap/info.json => keyboards/kbdfans/bounce/75/hotswap/info.json +3 -0
@@ 16,6 16,9 @@
"caps_lock": "C6",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F0"
},
M keyboards/kbdfans/bounce/75/soldered/config.h => keyboards/kbdfans/bounce/75/soldered/config.h +0 -1
@@ 32,6 32,5 @@
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 10
#define RGBLIGHT_VAL_STEP 10
-#define RGBLIGHT_SLEEP
#define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2=
\ No newline at end of file
M keyboards/kbdfans/bounce/75/soldered/info.json => keyboards/kbdfans/bounce/75/soldered/info.json +3 -0
@@ 17,6 17,9 @@
"caps_lock": "C6",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B7"
},
M keyboards/kbdfans/kbd19x/config.h => keyboards/kbdfans/kbd19x/config.h +0 -1
@@ 31,7 31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/kbdfans/kbd19x/info.json => keyboards/kbdfans/kbd19x/info.json +3 -0
@@ 22,6 22,9 @@
"scroll_lock": "B1",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/kbdfans/kbd4x/config.h => keyboards/kbdfans/kbd4x/config.h +0 -1
@@ 31,7 31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/kbdfans/kbd4x/info.json => keyboards/kbdfans/kbd4x/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B6",
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/kbdfans/kbd67/hotswap/config.h => keyboards/kbdfans/kbd67/hotswap/config.h +0 -2
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
@@ 33,7 32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
- #define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/kbdfans/kbd67/hotswap/info.json => keyboards/kbdfans/kbd67/hotswap/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B7",
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B4"
},
M keyboards/kbdfans/kbd67/rev1/config.h => keyboards/kbdfans/kbd67/rev1/config.h +0 -2
@@ 21,8 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
- #define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kbdfans/kbd67/rev1/info.json => keyboards/kbdfans/kbd67/rev1/info.json +2 -1
@@ 25,7 25,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 180
+ "max_brightness": 180,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/kbdfans/kbd67/rev2/config.h => keyboards/kbdfans/kbd67/rev2/config.h +0 -1
@@ 31,4 31,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
M keyboards/kbdfans/kbd67/rev2/info.json => keyboards/kbdfans/kbd67/rev2/info.json +2 -1
@@ 24,7 24,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 240
+ "max_brightness": 240,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/kbdfans/kbd6x/config.h => keyboards/kbdfans/kbd6x/config.h +0 -1
@@ 31,7 31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 12
#define RGBLIGHT_SAT_STEP 12
#define RGBLIGHT_VAL_STEP 12
-#define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/kbdfans/kbd6x/info.json => keyboards/kbdfans/kbd6x/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B7",
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F0"
},
M keyboards/kbdfans/kbd75/config.h => keyboards/kbdfans/kbd75/config.h +0 -2
@@ 23,5 23,3 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-/* If defined, the RGB lighting will be switched off when the host goes to sleep */
-#define RGBLIGHT_SLEEP
M keyboards/kbdfans/kbd75/rev1/info.json => keyboards/kbdfans/kbd75/rev1/info.json +3 -0
@@ 21,6 21,9 @@
"caps_lock": "B2",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/kbdfans/kbd75/rev2/info.json => keyboards/kbdfans/kbd75/rev2/info.json +3 -0
@@ 21,6 21,9 @@
"caps_lock": "B2",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/kbdfans/kbd75hs/config.h => keyboards/kbdfans/kbd75hs/config.h +0 -1
@@ 32,6 32,5 @@
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 10
#define RGBLIGHT_VAL_STEP 10
-#define RGBLIGHT_SLEEP
#define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2
M keyboards/kbdfans/kbd75hs/info.json => keyboards/kbdfans/kbd75hs/info.json +3 -0
@@ 16,6 16,9 @@
"indicators": {
"caps_lock": "C6"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F0"
},
M keyboards/kbdfans/kbd8x/config.h => keyboards/kbdfans/kbd8x/config.h +0 -1
@@ 31,7 31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/kbdfans/kbd8x/info.json => keyboards/kbdfans/kbd8x/info.json +3 -0
@@ 22,6 22,9 @@
"num_lock": "B1",
"scroll_lock": "B2"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/kbdfans/kbd8x_mk2/config.h => keyboards/kbdfans/kbd8x_mk2/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kbdfans/kbd8x_mk2/info.json => keyboards/kbdfans/kbd8x_mk2/info.json +2 -1
@@ 21,7 21,8 @@
"pin": "B3"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"indicators": {
"caps_lock": "E6",
M keyboards/kbdfans/kbdpad/mk2/config.h => keyboards/kbdfans/kbdpad/mk2/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kbdfans/kbdpad/mk2/info.json => keyboards/kbdfans/kbdpad/mk2/info.json +3 -0
@@ 18,6 18,9 @@
"levels": 5,
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B5"
},
M keyboards/kbdfans/odin/soldered/config.h => keyboards/kbdfans/odin/soldered/config.h +0 -1
@@ 31,6 31,5 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
#define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2
M keyboards/kbdfans/odin/soldered/info.json => keyboards/kbdfans/odin/soldered/info.json +2 -1
@@ 22,7 22,8 @@
"pin": "B15"
},
"rgblight": {
- "max_brightness": 180
+ "max_brightness": 180,
+ "sleep": true
},
"processor": "STM32F072",
"bootloader": "stm32-dfu",
M keyboards/kbdfans/odin/v2/config.h => keyboards/kbdfans/odin/v2/config.h +0 -1
@@ 29,4 29,3 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP
M keyboards/kbdfans/odin/v2/info.json => keyboards/kbdfans/odin/v2/info.json +2 -1
@@ 22,7 22,8 @@
"pin": "B15"
},
"rgblight": {
- "max_brightness": 180
+ "max_brightness": 180,
+ "sleep": true
},
"processor": "STM32F072",
"bootloader": "stm32-dfu",
M keyboards/kbdfans/phaseone/config.h => keyboards/kbdfans/phaseone/config.h +0 -1
@@ 36,6 36,5 @@
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 10
#define RGBLIGHT_VAL_STEP 10
-#define RGBLIGHT_SLEEP
#define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2=
\ No newline at end of file
M keyboards/kbdfans/phaseone/info.json => keyboards/kbdfans/phaseone/info.json +3 -0
@@ 18,6 18,9 @@
"num_lock": "D7",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B6"
},
M keyboards/kc60/config.h => keyboards/kc60/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kc60/info.json => keyboards/kc60/info.json +3 -0
@@ 18,6 18,9 @@
"levels": 5,
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F5"
},
M keyboards/keebformom/config.h => keyboards/keebformom/config.h +0 -1
@@ 20,7 20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/keebformom/info.json => keyboards/keebformom/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "F4"
},
"rgblight": {
- "max_brightness": 150
+ "max_brightness": 150,
+ "sleep": true
},
"matrix_pins": {
"cols": ["B3", "B2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"],
M keyboards/keebio/bamfk1/config.h => keyboards/keebio/bamfk1/config.h +0 -1
@@ 15,7 15,6 @@
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/keebio/bamfk1/info.json => keyboards/keebio/bamfk1/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x1111",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/keebio/bamfk4/config.h => keyboards/keebio/bamfk4/config.h +0 -1
@@ 7,7 7,6 @@
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== enabled animations ==*/
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/keebio/bamfk4/info.json => keyboards/keebio/bamfk4/info.json +2 -1
@@ 15,7 15,8 @@
"driver": "WS2812"
},
"rgblight": {
- "max_brightness": 120
+ "max_brightness": 120,
+ "sleep": true
},
"matrix_pins": {
"cols": ["E6", "D5", "B6", "B7"],
M keyboards/keebio/bdn9/rev1/config.h => keyboards/keebio/bdn9/rev1/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/keebio/bdn9/rev1/info.json => keyboards/keebio/bdn9/rev1/info.json +3 -0
@@ 15,6 15,9 @@
"pin": "B5",
"levels": 7
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/keebio/bdn9/rev2/config.h => keyboards/keebio/bdn9/rev2/config.h +0 -1
@@ 23,7 23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/keebio/bdn9/rev2/info.json => keyboards/keebio/bdn9/rev2/info.json +3 -0
@@ 4,6 4,9 @@
"pid": "0x2133",
"device_version": "2.0.0"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B15"
},
M keyboards/keebio/dsp40/rev1/config.h => keyboards/keebio/dsp40/rev1/config.h +0 -1
@@ 26,7 26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/keebio/dsp40/rev1/info.json => keyboards/keebio/dsp40/rev1/info.json +3 -0
@@ 22,6 22,9 @@
"pin": "A6",
"levels": 7
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/keebio/ergodicity/config.h => keyboards/keebio/ergodicity/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/keebio/ergodicity/info.json => keyboards/keebio/ergodicity/info.json +3 -0
@@ 18,6 18,9 @@
"levels": 7,
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B2"
},
M keyboards/keebio/iris/rev6/config.h => keyboards/keebio/iris/rev6/config.h +0 -1
@@ 24,7 24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== enabled animations ==*/
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/keebio/iris/rev6/info.json => keyboards/keebio/iris/rev6/info.json +1 -0
@@ 22,6 22,7 @@
},
"rgblight": {
"max_brightness": 120,
+ "sleep": true,
"split_count": [34, 34]
},
"split": {
M keyboards/keebio/iris/rev7/config.h => keyboards/keebio/iris/rev7/config.h +0 -1
@@ 24,7 24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== enabled animations ==*/
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/keebio/iris/rev7/info.json => keyboards/keebio/iris/rev7/info.json +1 -0
@@ 23,6 23,7 @@
},
"rgblight": {
"max_brightness": 120,
+ "sleep": true,
"split_count": [34, 34]
},
"split": {
M keyboards/keebio/stick/config.h => keyboards/keebio/stick/config.h +0 -1
@@ 22,7 22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/keebio/stick/info.json => keyboards/keebio/stick/info.json +3 -0
@@ 17,6 17,9 @@
{"pin_a": "D4", "pin_b": "C6"}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/keebio/wtf60/config.h => keyboards/keebio/wtf60/config.h +0 -1
@@ 22,7 22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/keebio/wtf60/info.json => keyboards/keebio/wtf60/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x1337",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E6"
},
M keyboards/keebmonkey/kbmg68/config.h => keyboards/keebmonkey/kbmg68/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/keebmonkey/kbmg68/info.json => keyboards/keebmonkey/kbmg68/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B0"
},
M keyboards/keebwerk/nano_slider/config.h => keyboards/keebwerk/nano_slider/config.h +0 -1
@@ 23,7 23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/keebwerk/nano_slider/info.json => keyboards/keebwerk/nano_slider/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B7",
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F6"
},
M keyboards/keybage/radpad/config.h => keyboards/keybage/radpad/config.h +0 -1
@@ 18,7 18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
#define RGBLED_NUM 16
- #define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/keybage/radpad/info.json => keyboards/keybage/radpad/info.json +3 -0
@@ 22,6 22,9 @@
"bootmagic": {
"matrix": [1, 3]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F4"
},
M keyboards/keycapsss/o4l_5x12/config.h => keyboards/keycapsss/o4l_5x12/config.h +0 -1
@@ 4,7 4,6 @@
# define RGBLIGHT_HUE_STEP 4
# define RGBLIGHT_SAT_STEP 4
# define RGBLIGHT_VAL_STEP 4
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/keyhive/absinthe/config.h => keyboards/keyhive/absinthe/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/keyhive/absinthe/info.json => keyboards/keyhive/absinthe/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0xFEED",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B0"
},
M keyboards/keyhive/ergosaurus/config.h => keyboards/keyhive/ergosaurus/config.h +0 -1
@@ 22,7 22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/keyhive/ergosaurus/info.json => keyboards/keyhive/ergosaurus/info.json +2 -1
@@ 11,7 11,8 @@
"pin": "B6"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"matrix_pins": {
"cols": ["D7", "C6", "D0", "D1", "F7", "B1", "B3", "B2"],
M keyboards/keyhive/smallice/config.h => keyboards/keyhive/smallice/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/keyhive/smallice/info.json => keyboards/keyhive/smallice/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x5341",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B7"
},
M keyboards/keyquest/enclave/config.h => keyboards/keyquest/enclave/config.h +0 -1
@@ 15,7 15,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* RGB light setup*/
#define RGBLED_NUM 2
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
M keyboards/keyquest/enclave/info.json => keyboards/keyquest/enclave/info.json +2 -1
@@ 11,7 11,8 @@
"pin": "B5"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"matrix_pins": {
"cols": ["B4", "B7", "C7"],
M keyboards/kiwikey/borderland/config.h => keyboards/kiwikey/borderland/config.h +0 -1
@@ 9,7 9,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kiwikey/kawii9/config.h => keyboards/kiwikey/kawii9/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kiwikey/wanderland/config.h => keyboards/kiwikey/wanderland/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kiwikey/wanderland/info.json => keyboards/kiwikey/wanderland/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B7",
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F7"
},
M keyboards/kopibeng/mnk88/config.h => keyboards/kopibeng/mnk88/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kopibeng/mnk88/info.json => keyboards/kopibeng/mnk88/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "A10"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"matrix_pins": {
"cols": ["A2", "A1", "A0", "B11", "B10", "B2", "F1", "B1", "B0", "A7", "A6", "A5", "F0", "A4", "C15", "C14", "C13"],
M keyboards/kopibeng/xt60/config.h => keyboards/kopibeng/xt60/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kopibeng/xt60/info.json => keyboards/kopibeng/xt60/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0600",
"device_version": "0.0.2"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F6"
},
M keyboards/kopibeng/xt60_singa/config.h => keyboards/kopibeng/xt60_singa/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kopibeng/xt60_singa/info.json => keyboards/kopibeng/xt60_singa/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0601",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F6"
},
M keyboards/kopibeng/xt65/config.h => keyboards/kopibeng/xt65/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kopibeng/xt65/info.json => keyboards/kopibeng/xt65/info.json +2 -1
@@ 21,7 21,8 @@
"pin": "D5"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/kopibeng/xt8x/config.h => keyboards/kopibeng/xt8x/config.h +0 -1
@@ 22,7 22,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kopibeng/xt8x/info.json => keyboards/kopibeng/xt8x/info.json +2 -1
@@ 21,7 21,8 @@
"pin": "A10"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "STM32F072",
"bootloader": "stm32-dfu",
M keyboards/kprepublic/bm43a/config.h => keyboards/kprepublic/bm43a/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#ifdef RGB_MATRIX_ENABLE
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value
#endif
M keyboards/kprepublic/bm43a/info.json => keyboards/kprepublic/bm43a/info.json +2 -1
@@ 21,7 21,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 180
+ "max_brightness": 180,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/kprepublic/bm43hsrgb/config.h => keyboards/kprepublic/bm43hsrgb/config.h +0 -2
@@ 21,8 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kprepublic/bm43hsrgb/info.json => keyboards/kprepublic/bm43hsrgb/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 180
+ "max_brightness": 180,
+ "sleep": true
},
"matrix_pins": {
"cols": ["C6", "D2", "D1", "D0", "D7", "D6", "D4", "D5", "D3", "B7", "B3", "B2"],
M keyboards/kprepublic/bm60hsrgb_iso/rev1/config.h => keyboards/kprepublic/bm60hsrgb_iso/rev1/config.h +0 -1
@@ 23,7 23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
- // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#ifdef RGB_MATRIX_ENABLE
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value
// RGB Matrix Animation modes. Explicitly enabled
M keyboards/kprepublic/bm60hsrgb_poker/rev1/config.h => keyboards/kprepublic/bm60hsrgb_poker/rev1/config.h +0 -1
@@ 23,7 23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kprepublic/bm60hsrgb_poker/rev1/info.json => keyboards/kprepublic/bm60hsrgb_poker/rev1/info.json +2 -1
@@ 15,7 15,8 @@
"driver": "WS2812"
},
"rgblight": {
- "max_brightness": 180
+ "max_brightness": 180,
+ "sleep": true
},
"matrix_pins": {
"cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F7"],
M keyboards/kprepublic/bm65hsrgb_iso/rev1/config.h => keyboards/kprepublic/bm65hsrgb_iso/rev1/config.h +0 -2
@@ 74,8 74,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
# define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_BAND_SAT
-/* If defined, the RGB lighting will be switched off when the host goes to sleep */
-# define RGBLIGHT_SLEEP
/*== all animations enable ==*/
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/kprepublic/bm65hsrgb_iso/rev1/info.json => keyboards/kprepublic/bm65hsrgb_iso/rev1/info.json +3 -0
@@ 9,6 9,9 @@
"device_version": "0.0.1",
"force_nkro": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/kprepublic/cospad/config.h => keyboards/kprepublic/cospad/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/kprepublic/cospad/info.json => keyboards/kprepublic/cospad/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "F7",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F6"
},
M keyboards/ktec/daisy/config.h => keyboards/ktec/daisy/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 12
# define RGBLIGHT_SAT_STEP 25
# define RGBLIGHT_VAL_STEP 12
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/labyrinth75/config.h => keyboards/labyrinth75/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/latincompass/latin17rgb/config.h => keyboards/latincompass/latin17rgb/config.h +0 -1
@@ 99,4 99,3 @@
#define RGBLIGHT_HUE_STEP 5
#define RGBLIGHT_SAT_STEP 5
#define RGBLIGHT_VAL_STEP 5
-#define RGBLIGHT_SLEEP
M keyboards/latincompass/latin17rgb/info.json => keyboards/latincompass/latin17rgb/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x7C97",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B7"
},
M keyboards/latincompass/latin47ble/config.h => keyboards/latincompass/latin47ble/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/lazydesigners/bolt/config.h => keyboards/lazydesigners/bolt/config.h +0 -1
@@ 28,7 28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
- #define RGBLIGHT_SLEEP
#define RGBLED_NUM 13
/* #define RGBLIGHT_HUE_STEP 8 */
/* #define RGBLIGHT_SAT_STEP 8 */
M keyboards/lazydesigners/bolt/info.json => keyboards/lazydesigners/bolt/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0041",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E6"
},
M keyboards/lazydesigners/cassette8/config.h => keyboards/lazydesigners/cassette8/config.h +0 -1
@@ 27,7 27,6 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
- #define RGBLIGHT_SLEEP
#define RGBLED_NUM 15
/* #define RGBLIGHT_HUE_STEP 8 */
/* #define RGBLIGHT_SAT_STEP 8 */
M keyboards/lazydesigners/cassette8/info.json => keyboards/lazydesigners/cassette8/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0008",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "C2"
},
M keyboards/lazydesigners/dimple/config.h => keyboards/lazydesigners/dimple/config.h +0 -1
@@ 34,7 34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
- #define RGBLIGHT_SLEEP
#define RGBLED_NUM 50
/* #define RGBLIGHT_HUE_STEP 8 */
/* #define RGBLIGHT_SAT_STEP 8 */
M keyboards/lazydesigners/dimple/ortho/info.json => keyboards/lazydesigners/dimple/ortho/info.json +3 -0
@@ 13,6 13,9 @@
"rows": ["D0", "D1", "D2", "D3"]
},
"diode_direction": "COL2ROW",
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B7"
},
M keyboards/lazydesigners/dimple/staggered/info.json => keyboards/lazydesigners/dimple/staggered/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0040",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B7"
},
M keyboards/lazydesigners/dimpleplus/config.h => keyboards/lazydesigners/dimpleplus/config.h +0 -1
@@ 28,7 28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
- #define RGBLIGHT_SLEEP
#define RGBLED_NUM 8
/* #define RGBLIGHT_HUE_STEP 8 */
/* #define RGBLIGHT_SAT_STEP 8 */
M keyboards/lazydesigners/dimpleplus/info.json => keyboards/lazydesigners/dimpleplus/info.json +3 -0
@@ 16,6 16,9 @@
"backlight": {
"pin": "B7"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D2"
},
M keyboards/lazydesigners/the40/config.h => keyboards/lazydesigners/the40/config.h +0 -1
@@ 21,7 21,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/lazydesigners/the40/info.json => keyboards/lazydesigners/the40/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B7",
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "C7"
},
M keyboards/lazydesigners/the50/config.h => keyboards/lazydesigners/the50/config.h +0 -1
@@ 7,4 7,3 @@
#define LOCKING_RESYNC_ENABLE
#define RGBLED_NUM 1
-#define RGBLIGHT_SLEEP
M keyboards/lazydesigners/the50/info.json => keyboards/lazydesigners/the50/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B6",
"levels": 6
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E6"
},
M keyboards/lazydesigners/the60/rev2/config.h => keyboards/lazydesigners/the60/rev2/config.h +0 -1
@@ 21,7 21,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/lazydesigners/the60/rev2/info.json => keyboards/lazydesigners/the60/rev2/info.json +3 -0
@@ 18,6 18,9 @@
"levels": 5,
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D1"
},
M keyboards/linworks/fave87/config.h => keyboards/linworks/fave87/config.h +0 -1
@@ 16,7 16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* Underglow */
#define RGBLED_NUM 40
-#define RGBLIGHT_SLEEP // Turns LEDs off if the PC goes to sleep/shutdown
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/linworks/fave87/info.json => keyboards/linworks/fave87/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B7",
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/linworks/whale75/config.h => keyboards/linworks/whale75/config.h +0 -1
@@ 28,7 28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define WS2812_PWM_PAL_MODE 2
#define WS2812_DMA_STREAM STM32_DMA1_STREAM7
#define WS2812_DMA_CHANNEL 7
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/linworks/whale75/info.json => keyboards/linworks/whale75/info.json +3 -0
@@ 8,6 8,9 @@
"device_version": "0.0.1",
"force_nkro": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B9",
"driver": "pwm"
M keyboards/lm_keyboard/lm60n/config.h => keyboards/lm_keyboard/lm60n/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/lm_keyboard/lm60n/info.json => keyboards/lm_keyboard/lm60n/info.json +3 -0
@@ 17,6 17,9 @@
"caps_lock": "C7",
"num_lock": "B7"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B0"
},
M keyboards/longnald/corin/config.h => keyboards/longnald/corin/config.h +0 -1
@@ 22,7 22,6 @@
# define RGBLIGHT_HUE_STEP 20
# define RGBLIGHT_SAT_STEP 20
# define RGBLIGHT_VAL_STEP 40
-# define RGBLIGHT_SLEEP
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
# define RGBLIGHT_EFFECT_SNAKE
M keyboards/longnald/corin/info.json => keyboards/longnald/corin/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "D3"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"matrix_pins": {
"cols": ["F7", "F6", "F1", "F5", "B1", "E6", "D4", "B7", "D1", "D2", "D0", "B4", "B6", "C6", "C7"],
M keyboards/lyso1/lck75/config.h => keyboards/lyso1/lck75/config.h +0 -2
@@ 21,8 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-#define RGBLIGHT_SLEEP
-
#define OLED_TIMEOUT 10000
#define UNICODE_SELECTED_MODES UNICODE_MODE_WINCOMPOSE, UNICODE_MODE_MACOS, UNICODE_MODE_LINUX
M keyboards/lz/erghost/config.h => keyboards/lz/erghost/config.h +0 -1
@@ 42,7 42,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_STATIC_LIGHT
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/lz/erghost/info.json => keyboards/lz/erghost/info.json +3 -0
@@ 12,6 12,9 @@
"pin": "B6",
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/manta60/config.h => keyboards/manta60/config.h +0 -1
@@ 29,7 29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_VAL_STEP 4
# define RGBLIGHT_LIMIT_VAL 32 /* The maximum brightness level */
# endif
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/marksard/leftover30/config.h => keyboards/marksard/leftover30/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/marksard/leftover30/info.json => keyboards/marksard/leftover30/info.json +3 -0
@@ 18,6 18,9 @@
{"pin_a": "F4", "pin_b": "F5"}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/marksard/rhymestone/rev1/config.h => keyboards/marksard/rhymestone/rev1/config.h +0 -1
@@ 22,7 22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/marksard/rhymestone/rev1/info.json => keyboards/marksard/rhymestone/rev1/info.json +1 -0
@@ 24,6 24,7 @@
},
"rgblight": {
"max_brightness": 150,
+ "sleep": true,
"split_count": [20, 20]
},
"processor": "atmega32u4",
M keyboards/marksard/treadstone32/lite/config.h => keyboards/marksard/treadstone32/lite/config.h +0 -1
@@ 27,7 27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#endif
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/marksard/treadstone32/lite/info.json => keyboards/marksard/treadstone32/lite/info.json +3 -0
@@ 3,6 3,9 @@
"usb": {
"device_version": "0.1.5"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/marksard/treadstone32/rev1/config.h => keyboards/marksard/treadstone32/rev1/config.h +0 -1
@@ 27,7 27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#endif
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/marksard/treadstone32/rev1/info.json => keyboards/marksard/treadstone32/rev1/info.json +3 -0
@@ 3,6 3,9 @@
"usb": {
"device_version": "0.1.0"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/marksard/treadstone48/rev1/config.h => keyboards/marksard/treadstone48/rev1/config.h +0 -1
@@ 27,7 27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/marksard/treadstone48/rev1/info.json => keyboards/marksard/treadstone48/rev1/info.json +2 -1
@@ 20,7 20,8 @@
"pin": "D3"
},
"rgblight": {
- "max_brightness": 180
+ "max_brightness": 180,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "caterina",
M keyboards/marksard/treadstone48/rev2/config.h => keyboards/marksard/treadstone48/rev2/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/marksard/treadstone48/rev2/info.json => keyboards/marksard/treadstone48/rev2/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "D3"
},
"rgblight": {
- "max_brightness": 220
+ "max_brightness": 220,
+ "sleep": true
},
"matrix_pins": {
"cols": ["D4", "C6", "D7", "E6", "B4", "B5"],
M keyboards/matrix/cain_re/config.h => keyboards/matrix/cain_re/config.h +0 -1
@@ 35,7 35,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
#define CAPS_PIN D3
#define NUM_PIN F7
M keyboards/matrix/cain_re/info.json => keyboards/matrix/cain_re/info.json +1 -0
@@ 9,6 9,7 @@
"device_version": "0.0.1"
},
"rgblight": {
+ "sleep": true,
"led_map": [4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 0, 1, 2, 3]
},
"ws2812": {
M keyboards/matrix/m12og/rev1/config.h => keyboards/matrix/m12og/rev1/config.h +0 -1
@@ 44,5 44,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLED_NUM 16
-#define RGBLIGHT_SLEEP
#define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB
M keyboards/matrix/m12og/rev1/info.json => keyboards/matrix/m12og/rev1/info.json +3 -0
@@ 12,6 12,9 @@
"caps_lock": "B6",
"scroll_lock": "B5"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B8"
},
M keyboards/matrix/m12og/rev2/config.h => keyboards/matrix/m12og/rev2/config.h +0 -1
@@ 18,5 18,4 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
#define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB
M keyboards/matrix/m12og/rev2/info.json => keyboards/matrix/m12og/rev2/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x8712",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B3"
},
M keyboards/mechanickeys/undead60m/config.h => keyboards/mechanickeys/undead60m/config.h +0 -1
@@ 18,7 18,6 @@
/* RGB Underglow */
#define RGBLED_NUM 16
- #define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechanickeys/undead60m/info.json => keyboards/mechanickeys/undead60m/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x3C4D",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F7"
},
M keyboards/mechbrewery/mb65s/config.h => keyboards/mechbrewery/mb65s/config.h +0 -1
@@ 31,4 31,3 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
M keyboards/mechbrewery/mb65s/info.json => keyboards/mechbrewery/mb65s/info.json +2 -1
@@ 21,7 21,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 240
+ "max_brightness": 240,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/mechkeys/mk60/config.h => keyboards/mechkeys/mk60/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechkeys/mk60/info.json => keyboards/mechkeys/mk60/info.json +3 -0
@@ 22,6 22,9 @@
"caps_lock": "B7",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E6"
},
M keyboards/mechlovin/delphine/mono_led/config.h => keyboards/mechlovin/delphine/mono_led/config.h +0 -1
@@ 6,7 6,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechlovin/delphine/mono_led/info.json => keyboards/mechlovin/delphine/mono_led/info.json +3 -0
@@ 3,6 3,9 @@
"pid": "0xDEF1",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/mechlovin/delphine/rgb_led/config.h => keyboards/mechlovin/delphine/rgb_led/config.h +0 -1
@@ 5,7 5,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechlovin/delphine/rgb_led/info.json => keyboards/mechlovin/delphine/rgb_led/info.json +3 -0
@@ 3,6 3,9 @@
"pid": "0xDEF2",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/mechlovin/foundation/config.h => keyboards/mechlovin/foundation/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechlovin/foundation/info.json => keyboards/mechlovin/foundation/info.json +3 -0
@@ 22,6 22,9 @@
"caps_lock": "A1",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B15"
},
M keyboards/mechlovin/infinity87/rev1/standard/config.h => keyboards/mechlovin/infinity87/rev1/standard/config.h +0 -1
@@ 17,7 17,6 @@
#pragma once
#define RGBLED_NUM 26
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechlovin/infinity87/rev1/standard/info.json => keyboards/mechlovin/infinity87/rev1/standard/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x8701",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "A15"
},
M keyboards/mechlovin/infinity87/rev2/config.h => keyboards/mechlovin/infinity87/rev2/config.h +0 -1
@@ 39,7 39,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechlovin/infinity87/rev2/info.json => keyboards/mechlovin/infinity87/rev2/info.json +3 -0
@@ 17,6 17,9 @@
"num_lock": "D7",
"scroll_lock": "B4"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/mechlovin/infinity88/config.h => keyboards/mechlovin/infinity88/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define BACKLIGHT_PWM_CHANNEL 3
#define RGBLED_NUM 26
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechlovin/infinity88/info.json => keyboards/mechlovin/infinity88/info.json +3 -0
@@ 21,6 21,9 @@
"caps_lock": "A4",
"num_lock": "A3"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "A15"
},
M keyboards/mechlovin/kay60/config.h => keyboards/mechlovin/kay60/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechlovin/kay60/info.json => keyboards/mechlovin/kay60/info.json +3 -0
@@ 16,6 16,9 @@
"indicators": {
"caps_lock": "B0"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/mechlovin/kay65/config.h => keyboards/mechlovin/kay65/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechlovin/kay65/info.json => keyboards/mechlovin/kay65/info.json +3 -0
@@ 17,6 17,9 @@
"caps_lock": "D6",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/mechlovin/olly/bb/config.h => keyboards/mechlovin/olly/bb/config.h +0 -1
@@ 36,7 36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#ifdef RGBLIGHT_ENABLE
#define RGBLED_NUM 24
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/mechlovin/olly/bb/info.json => keyboards/mechlovin/olly/bb/info.json +3 -0
@@ 12,6 12,9 @@
"pin": "D4",
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B3"
},
M keyboards/mechlovin/olly/jf/config.h => keyboards/mechlovin/olly/jf/config.h +0 -1
@@ 38,7 38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DIODE_DIRECTION ROW2COL
#define RGBLED_NUM 27
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/mechlovin/olly/jf/info.json => keyboards/mechlovin/olly/jf/info.json +3 -0
@@ 17,6 17,9 @@
"num_lock": "B1",
"scroll_lock": "B2"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B3"
},
M keyboards/mechlovin/olly/orion/config.h => keyboards/mechlovin/olly/orion/config.h +0 -1
@@ 22,7 22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechlovin/olly/orion/info.json => keyboards/mechlovin/olly/orion/info.json +3 -0
@@ 18,6 18,9 @@
"num_lock": "A13",
"scroll_lock": "A14"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B15"
},
M keyboards/mechlovin/pisces/config.h => keyboards/mechlovin/pisces/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechlovin/pisces/info.json => keyboards/mechlovin/pisces/info.json +3 -0
@@ 19,6 19,9 @@
"indicators": {
"caps_lock": "B2"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/mechlovin/serratus/config.h => keyboards/mechlovin/serratus/config.h +0 -1
@@ 43,7 43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechlovin/serratus/info.json => keyboards/mechlovin/serratus/info.json +3 -0
@@ 17,6 17,9 @@
"num_lock": "D7",
"scroll_lock": "B4"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/mechlovin/zed60/config.h => keyboards/mechlovin/zed60/config.h +0 -2
@@ 26,8 26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechlovin/zed60/info.json => keyboards/mechlovin/zed60/info.json +3 -0
@@ 16,6 16,9 @@
"indicators": {
"caps_lock": "A4"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "A7",
"driver": "spi"
M keyboards/mechlovin/zed65/mono_led/config.h => keyboards/mechlovin/zed65/mono_led/config.h +0 -1
@@ 65,7 65,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechlovin/zed65/mono_led/info.json => keyboards/mechlovin/zed65/mono_led/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x6503",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "A7"
},
M keyboards/mechlovin/zed65/no_backlight/wearhaus66/config.h => keyboards/mechlovin/zed65/no_backlight/wearhaus66/config.h +0 -2
@@ 26,8 26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechlovin/zed65/no_backlight/wearhaus66/info.json => keyboards/mechlovin/zed65/no_backlight/wearhaus66/info.json +3 -0
@@ 16,6 16,9 @@
"indicators": {
"caps_lock": "C14"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B15",
"driver": "spi"
M keyboards/mechstudio/ud_40_ortho/config.h => keyboards/mechstudio/ud_40_ortho/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechstudio/ud_40_ortho/info.json => keyboards/mechstudio/ud_40_ortho/info.json +3 -0
@@ 17,6 17,9 @@
"esc_input": "B7",
"esc_output": "F0"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B7"
},
M keyboards/mechwild/mokulua/mirrored/config.h => keyboards/mechwild/mokulua/mirrored/config.h +0 -1
@@ 19,7 19,6 @@
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== choose RGB animations ==*/
//# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/mechwild/mokulua/mirrored/info.json => keyboards/mechwild/mokulua/mirrored/info.json +1 -0
@@ 22,6 22,7 @@
"soft_serial_pin": "D3"
},
"rgblight": {
+ "sleep": true,
"split_count": [8, 8]
},
"ws2812": {
M keyboards/mechwild/mokulua/standard/config.h => keyboards/mechwild/mokulua/standard/config.h +0 -1
@@ 19,7 19,6 @@
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== choose RGB animations ==*/
//# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/mechwild/mokulua/standard/info.json => keyboards/mechwild/mokulua/standard/info.json +1 -0
@@ 22,6 22,7 @@
"soft_serial_pin": "D3"
},
"rgblight": {
+ "sleep": true,
"split_count": [8, 8]
},
"ws2812": {
M keyboards/mechwild/murphpad/config.h => keyboards/mechwild/murphpad/config.h +0 -1
@@ 25,7 25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechwild/murphpad/info.json => keyboards/mechwild/murphpad/info.json +3 -0
@@ 22,6 22,9 @@
"bootmagic": {
"matrix": [0, 1]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F4"
},
M keyboards/mechwild/obe/config.h => keyboards/mechwild/obe/config.h +0 -1
@@ 24,7 24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechwild/obe/info.json => keyboards/mechwild/obe/info.json +3 -0
@@ 25,6 25,9 @@
"bootmagic": {
"matrix": [5, 4]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "A0"
},
M keyboards/mechwild/puckbuddy/config.h => keyboards/mechwild/puckbuddy/config.h +0 -1
@@ 36,7 36,6 @@
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechwild/puckbuddy/info.json => keyboards/mechwild/puckbuddy/info.json +3 -0
@@ 23,6 23,9 @@
"caps_lock": "C13",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "A3"
},
M keyboards/mechwild/waka60/config.h => keyboards/mechwild/waka60/config.h +0 -1
@@ 24,7 24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mechwild/waka60/info.json => keyboards/mechwild/waka60/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x1709",
"device_version": "1.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "A1"
},
M keyboards/meletrix/zoom87/config.h => keyboards/meletrix/zoom87/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*======= RGB function=======*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/meletrix/zoom87/info.json => keyboards/meletrix/zoom87/info.json +2 -1
@@ 21,7 21,8 @@
"pin": "D2"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/melgeek/mj6xy/rev3/config.h => keyboards/melgeek/mj6xy/rev3/config.h +0 -1
@@ 32,4 32,3 @@
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP
M keyboards/melgeek/mj6xy/rev3/info.json => keyboards/melgeek/mj6xy/rev3/info.json +3 -0
@@ 9,6 9,9 @@
"pin": "B7",
"levels": 10
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "C6"
}
M keyboards/meow48/config.h => keyboards/meow48/config.h +0 -2
@@ 23,8 23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-
/*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/meow48/info.json => keyboards/meow48/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "D3"
},
"rgblight": {
- "max_brightness": 100
+ "max_brightness": 100,
+ "sleep": true
},
"matrix_pins": {
"cols": ["F6", "F7", "B1", "B3", "B2", "B6"],
M keyboards/merge/uc1/config.h => keyboards/merge/uc1/config.h +0 -1
@@ 30,4 30,3 @@
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 10
#define RGBLIGHT_VAL_STEP 10
-#define RGBLIGHT_SLEEP
M keyboards/merge/uc1/info.json => keyboards/merge/uc1/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x5543",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B5"
},
M keyboards/merge/um70/config.h => keyboards/merge/um70/config.h +0 -1
@@ 25,7 25,6 @@
# define RGB_MATRIX_LED_COUNT RGBLED_NUM
# define RGB_MATRIX_SPLIT { 39, 44 }
#endif
-#define RGBLIGHT_SLEEP
#define B6_AUDIO
M keyboards/merge/um70/info.json => keyboards/merge/um70/info.json +1 -0
@@ 26,6 26,7 @@
},
"rgblight": {
"max_brightness": 150,
+ "sleep": true,
"split_count": [39, 44]
},
"processor": "atmega32u4",
M keyboards/merge/um80/config.h => keyboards/merge/um80/config.h +0 -1
@@ 25,7 25,6 @@
# define RGB_MATRIX_LED_COUNT RGBLED_NUM
# define RGB_MATRIX_SPLIT { 48, 52 }
#endif
-#define RGBLIGHT_SLEEP
#define AUDIO_PIN B6
M keyboards/merge/um80/info.json => keyboards/merge/um80/info.json +1 -0
@@ 26,6 26,7 @@
},
"rgblight": {
"max_brightness": 120,
+ "sleep": true,
"split_count": [48, 52]
},
"processor": "atmega32u4",
M keyboards/meson/config.h => keyboards/meson/config.h +0 -1
@@ 23,7 23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/meson/info.json => keyboards/meson/info.json +1 -0
@@ 16,6 16,7 @@
"soft_serial_pin": "D0"
},
"rgblight": {
+ "sleep": true,
"split_count": [5, 5]
},
"ws2812": {
M keyboards/mexsistor/ludmila/config.h => keyboards/mexsistor/ludmila/config.h +0 -1
@@ 39,7 39,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DIODE_DIRECTION COL2ROW
#define RGBLED_NUM 4
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mexsistor/ludmila/info.json => keyboards/mexsistor/ludmila/info.json +3 -0
@@ 13,6 13,9 @@
{"pin_a": "F6", "pin_b": "F5"}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D1"
},
M keyboards/mincedshon/ecila/config.h => keyboards/mincedshon/ecila/config.h +0 -1
@@ 17,4 17,3 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
M keyboards/mincedshon/ecila/info.json => keyboards/mincedshon/ecila/info.json +2 -1
@@ 11,7 11,8 @@
"pin": "B0"
},
"rgblight": {
- "max_brightness": 150
+ "max_brightness": 150,
+ "sleep": true
},
"bootloader": "atmel-dfu",
"features": {
M keyboards/minimon/index_tab/config.h => keyboards/minimon/index_tab/config.h +0 -1
@@ 22,7 22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LOCKING_RESYNC_ENABLE
#define RGBLED_NUM 10
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/minimon/index_tab/info.json => keyboards/minimon/index_tab/info.json +3 -0
@@ 9,6 9,9 @@
"pid": "0x1306",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E6"
},
M keyboards/misterknife/knife66/config.h => keyboards/misterknife/knife66/config.h +0 -1
@@ 27,7 27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_SLEEP
#define RGBLED_NUM 6
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
M keyboards/misterknife/knife66/info.json => keyboards/misterknife/knife66/info.json +2 -1
@@ 13,7 13,8 @@
"driver": "pwm"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"matrix_pins": {
"cols": ["B2", "B1", "B0", "A7", "A6", "A5", "A4", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15"],
M keyboards/misterknife/knife66_iso/config.h => keyboards/misterknife/knife66_iso/config.h +0 -1
@@ 27,7 27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_SLEEP
#define RGBLED_NUM 6
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
M keyboards/misterknife/knife66_iso/info.json => keyboards/misterknife/knife66_iso/info.json +2 -1
@@ 13,7 13,8 @@
"driver": "pwm"
},
"rgblight": {
- "max_brightness": 160
+ "max_brightness": 160,
+ "sleep": true
},
"matrix_pins": {
"cols": ["B2", "B1", "B0", "A7", "A6", "A5", "A4", "B9", "B8", "B7", "B6", "B5", "B4", "B3", "A15"],
M keyboards/mixi/config.h => keyboards/mixi/config.h +0 -1
@@ 10,7 10,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/mixi/info.json => keyboards/mixi/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x4D49",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B5"
},
M keyboards/mt/mt64rgb/config.h => keyboards/mt/mt64rgb/config.h +0 -1
@@ 94,7 94,6 @@
#define RGBLIGHT_HUE_STEP 5
#define RGBLIGHT_SAT_STEP 5
#define RGBLIGHT_VAL_STEP 5
-#define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/mt/mt64rgb/info.json => keyboards/mt/mt64rgb/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B0"
},
M keyboards/mt/mt84/config.h => keyboards/mt/mt84/config.h +0 -1
@@ 90,7 90,6 @@
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/mt/mt84/info.json => keyboards/mt/mt84/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0002",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B0"
},
M keyboards/mt/split75/config.h => keyboards/mt/split75/config.h +0 -1
@@ 18,6 18,5 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_SLEEP
#define I2C_START_RETRY_COUNT 1
M keyboards/mt/split75/info.json => keyboards/mt/split75/info.json +3 -0
@@ 11,6 11,9 @@
"backlight": {
"pin": "D4"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"driver": "i2c"
},
M keyboards/mtbkeys/mtb60/hotswap/config.h => keyboards/mtbkeys/mtb60/hotswap/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* Turn RGB light off when the host goes to sleep */
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_CHRISTMAS
M keyboards/mtbkeys/mtb60/hotswap/info.json => keyboards/mtbkeys/mtb60/hotswap/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D4"
},
M keyboards/mtbkeys/mtb60/solder/config.h => keyboards/mtbkeys/mtb60/solder/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* Turn RGB light off when the host goes to sleep */
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_CHRISTMAS
M keyboards/mtbkeys/mtb60/solder/info.json => keyboards/mtbkeys/mtb60/solder/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B0"
},
M keyboards/mwstudio/mw75/config.h => keyboards/mwstudio/mw75/config.h +0 -2
@@ 16,8 16,6 @@
#pragma once
-#define RGBLIGHT_SLEEP
-
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
#define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
#define RGB_MATRIX_LED_COUNT 97
M keyboards/mwstudio/mw75/info.json => keyboards/mwstudio/mw75/info.json +3 -0
@@ 24,6 24,9 @@
"bootmagic": {
"matrix": [0, 1]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B3"
},
M keyboards/mwstudio/mw75r2/config.h => keyboards/mwstudio/mw75r2/config.h +0 -2
@@ 16,8 16,6 @@
#pragma once
-#define RGBLIGHT_SLEEP
-
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255
#define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
#define RGB_MATRIX_LED_COUNT 21
M keyboards/mwstudio/mw75r2/info.json => keyboards/mwstudio/mw75r2/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x7502",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B3"
},
M keyboards/neokeys/g67/element_hs/config.h => keyboards/neokeys/g67/element_hs/config.h +0 -1
@@ 21,7 21,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/neokeys/g67/element_hs/info.json => keyboards/neokeys/g67/element_hs/info.json +2 -1
@@ 17,7 17,8 @@
"pin": "F0"
},
"rgblight": {
- "max_brightness": 150
+ "max_brightness": 150,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/neokeys/g67/hotswap/config.h => keyboards/neokeys/g67/hotswap/config.h +0 -1
@@ 21,7 21,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/neokeys/g67/hotswap/info.json => keyboards/neokeys/g67/hotswap/info.json +2 -1
@@ 17,7 17,8 @@
"pin": "F0"
},
"rgblight": {
- "max_brightness": 150
+ "max_brightness": 150,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/neokeys/g67/soldered/config.h => keyboards/neokeys/g67/soldered/config.h +0 -1
@@ 21,7 21,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/neokeys/g67/soldered/info.json => keyboards/neokeys/g67/soldered/info.json +2 -1
@@ 22,7 22,8 @@
"pin": "F0"
},
"rgblight": {
- "max_brightness": 150
+ "max_brightness": 150,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/nightly_boards/alter/rev1/config.h => keyboards/nightly_boards/alter/rev1/config.h +0 -1
@@ 18,7 18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/nightly_boards/alter/rev1/info.json => keyboards/nightly_boards/alter/rev1/info.json +3 -0
@@ 18,6 18,9 @@
"num_lock": "D7",
"scroll_lock": "B4"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F1"
},
M keyboards/nightly_boards/n2/config.h => keyboards/nightly_boards/n2/config.h +0 -1
@@ 18,7 18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/nightly_boards/n2/info.json => keyboards/nightly_boards/n2/info.json +3 -0
@@ 13,6 13,9 @@
"rows": ["F1", "C7"]
},
"diode_direction": "COL2ROW",
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D4"
},
M keyboards/nightly_boards/n60_s/config.h => keyboards/nightly_boards/n60_s/config.h +0 -2
@@ 32,8 32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/nightly_boards/n60_s/info.json => keyboards/nightly_boards/n60_s/info.json +3 -0
@@ 18,6 18,9 @@
{"pin_a": "D3", "pin_b": "D5"}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D1"
},
M keyboards/nightly_boards/n87/config.h => keyboards/nightly_boards/n87/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/nightly_boards/n87/info.json => keyboards/nightly_boards/n87/info.json +3 -0
@@ 13,6 13,9 @@
"rows": ["B0", "B1", "B2", "B3", "F1", "F0", "D7", "B4", "D1", "D2", "D3", "D5"]
},
"diode_direction": "COL2ROW",
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D0"
},
M keyboards/nightly_boards/n9/config.h => keyboards/nightly_boards/n9/config.h +0 -1
@@ 18,7 18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/nightly_boards/n9/info.json => keyboards/nightly_boards/n9/info.json +3 -0
@@ 13,6 13,9 @@
"rows": ["F4", "B1", "B3"]
},
"diode_direction": "COL2ROW",
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F5"
},
M keyboards/nix_studio/oxalys80/config.h => keyboards/nix_studio/oxalys80/config.h +0 -1
@@ 35,4 35,3 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP // RGB will turn off when PC is put to sleep
M keyboards/nix_studio/oxalys80/info.json => keyboards/nix_studio/oxalys80/info.json +2 -1
@@ 20,7 20,8 @@
"pin": "B3"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"indicators": {
"caps_lock": "E6",
M keyboards/novelkeys/nk1/config.h => keyboards/novelkeys/nk1/config.h +0 -1
@@ 21,7 21,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/novelkeys/nk1/info.json => keyboards/novelkeys/nk1/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x4E4D",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F0"
},
M keyboards/novelkeys/novelpad/config.h => keyboards/novelkeys/novelpad/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/nullbitsco/nibble/config.h => keyboards/nullbitsco/nibble/config.h +0 -1
@@ 50,4 50,3 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_SLEEP
M keyboards/nullbitsco/nibble/info.json => keyboards/nullbitsco/nibble/info.json +3 -0
@@ 12,6 12,9 @@
{"pin_a": "B5", "pin_b": "B4"}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E6"
},
M keyboards/nullbitsco/snap/config.h => keyboards/nullbitsco/snap/config.h +0 -1
@@ 59,7 59,6 @@
/* Optional SMT LED pins */
#define RGBLED_NUM 10
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/nullbitsco/snap/info.json => keyboards/nullbitsco/snap/info.json +1 -0
@@ 8,6 8,7 @@
"device_version": "0.0.1"
},
"rgblight": {
+ "sleep": true,
"led_map": [8, 9, 0, 1, 2, 6, 7, 3, 4, 5],
"split_count": [5, 5]
},
M keyboards/oddforge/vea/config.h => keyboards/oddforge/vea/config.h +0 -1
@@ 37,5 37,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 9
M keyboards/oddforge/vea/info.json => keyboards/oddforge/vea/info.json +3 -0
@@ 11,6 11,9 @@
"backlight": {
"pin": "D4"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"driver": "custom"
},
M keyboards/om60/config.h => keyboards/om60/config.h +0 -1
@@ 36,7 36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#ifndef RGBLED_NUM
#define RGBLED_NUM 69
- #define RGBLIGHT_SLEEP
#endif
#define RGBLIGHT_EFFECT_BREATHING
M keyboards/om60/info.json => keyboards/om60/info.json +1 -0
@@ 14,6 14,7 @@
]
},
"rgblight": {
+ "sleep": true,
"led_map": [0, 1, 2, 3, 8, 7, 6, 5, 4, 9, 10, 11, 12, 13, 18, 17, 16, 15, 14, 19, 20, 21, 22, 23, 28, 27, 26, 25, 24, 29, 30, 31, 32, 33, 38, 37, 36, 35, 34, 39, 40, 41, 42, 43, 48, 47, 46, 45, 44, 49, 50, 51, 52, 53, 58, 57, 56, 55, 54, 59, 60, 61, 62, 63, 68, 67, 66, 65, 64]
},
"ws2812": {
M keyboards/orthocode/config.h => keyboards/orthocode/config.h +0 -1
@@ 22,7 22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/orthocode/info.json => keyboards/orthocode/info.json +3 -0
@@ 19,6 19,9 @@
{"pin_a": "D1", "pin_b": "D0", "resolution": 1}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D5"
},
M keyboards/pearlboards/atlas/config.h => keyboards/pearlboards/atlas/config.h +0 -2
@@ 30,7 30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define V_PEAK 5
/*== all animations enabled ==*/
-/* If RGBLIGHT_SLEEP defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_CHRISTMAS
@@ 44,7 43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/pearlboards/atlas/info.json => keyboards/pearlboards/atlas/info.json +3 -0
@@ 24,6 24,9 @@
"scroll_lock": "F6",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B6"
},
M keyboards/pearlboards/pandora/config.h => keyboards/pearlboards/pandora/config.h +0 -2
@@ 20,7 20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DIP_SWITCH_PINS { B2, B5 }
/*== all animations enabled ==*/
-/* If RGBLIGHT_SLEEP defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_CHRISTMAS
@@ 34,7 33,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/pearlboards/pandora/info.json => keyboards/pearlboards/pandora/info.json +3 -0
@@ 22,6 22,9 @@
"caps_lock": "E6",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B1"
},
M keyboards/pearlboards/pearl/config.h => keyboards/pearlboards/pearl/config.h +0 -2
@@ 30,7 30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define V_PEAK 5
/*== all animations enabled ==*/
-/* If RGBLIGHT_SLEEP defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_CHRISTMAS
@@ 45,7 44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/pearlboards/pearl/info.json => keyboards/pearlboards/pearl/info.json +3 -0
@@ 19,6 19,9 @@
"scroll_lock": "B2",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B3"
},
M keyboards/pearlboards/zeus/config.h => keyboards/pearlboards/zeus/config.h +0 -2
@@ 34,7 34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define V_PEAK 5
/*== all animations enabled ==*/
-/* If RGBLIGHT_SLEEP defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_CHRISTMAS
@@ 48,7 47,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/pearlboards/zeus/info.json => keyboards/pearlboards/zeus/info.json +3 -0
@@ 24,6 24,9 @@
"scroll_lock": "C3",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D5"
},
M keyboards/pearlboards/zeuspad/config.h => keyboards/pearlboards/zeuspad/config.h +0 -2
@@ 25,7 25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define AUDIO_PIN C6
/*== all animations enabled ==*/
-/* If RGBLIGHT_SLEEP defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_CHRISTMAS
@@ 39,7 38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/pearlboards/zeuspad/info.json => keyboards/pearlboards/zeuspad/info.json +3 -0
@@ 18,6 18,9 @@
{"pin_a": "D6", "pin_b": "D4", "resolution": 1}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B7"
},
M keyboards/percent/booster/config.h => keyboards/percent/booster/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/percent/booster/info.json => keyboards/percent/booster/info.json +3 -0
@@ 16,6 16,9 @@
"backlight": {
"pin": "B7"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/phantom/config.h => keyboards/phantom/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 10
# define RGBLIGHT_SAT_STEP 17
# define RGBLIGHT_VAL_STEP 17
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/pimentoso/touhoupad/config.h => keyboards/pimentoso/touhoupad/config.h +0 -1
@@ 19,7 19,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/pimentoso/touhoupad/info.json => keyboards/pimentoso/touhoupad/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0031",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F4"
},
M keyboards/playkbtw/helen80/config.h => keyboards/playkbtw/helen80/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/playkbtw/helen80/info.json => keyboards/playkbtw/helen80/info.json +2 -1
@@ 22,7 22,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 180
+ "max_brightness": 180,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/playkbtw/pk64rgb/config.h => keyboards/playkbtw/pk64rgb/config.h +0 -1
@@ 53,7 53,6 @@
# define RGBLIGHT_HUE_STEP 5
# define RGBLIGHT_SAT_STEP 5
# define RGBLIGHT_VAL_STEP 5
-# define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/playkbtw/pk64rgb/info.json => keyboards/playkbtw/pk64rgb/info.json +3 -0
@@ 16,6 16,9 @@
"rows": ["D7", "D6", "D5", "D3", "D2"]
},
"diode_direction": "COL2ROW",
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B0"
},
M keyboards/plume/plume65/config.h => keyboards/plume/plume65/config.h +0 -1
@@ 20,7 20,6 @@
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/plut0nium/0x3e/config.h => keyboards/plut0nium/0x3e/config.h +0 -1
@@ 24,7 24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 12
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/plut0nium/0x3e/info.json => keyboards/plut0nium/0x3e/info.json +2 -1
@@ 22,7 22,8 @@
"pin": "C7"
},
"rgblight": {
- "max_brightness": 150
+ "max_brightness": 150,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/plywrks/lune/config.h => keyboards/plywrks/lune/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/pohjolaworks/louhi/config.h => keyboards/pohjolaworks/louhi/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/poker87c/config.h => keyboards/poker87c/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/poker87c/info.json => keyboards/poker87c/info.json +2 -1
@@ 20,7 20,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 180
+ "max_brightness": 180,
+ "sleep": true
},
"indicators": {
"caps_lock": "B3",
M keyboards/poker87d/config.h => keyboards/poker87d/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/poker87d/info.json => keyboards/poker87d/info.json +2 -1
@@ 25,7 25,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 180
+ "max_brightness": 180,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/polycarbdiet/s20/config.h => keyboards/polycarbdiet/s20/config.h +0 -2
@@ 20,8 20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/polycarbdiet/s20/info.json => keyboards/polycarbdiet/s20/info.json +3 -0
@@ 18,6 18,9 @@
"pin": "B6",
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B3"
},
M keyboards/pom_keyboards/tnln95/config.h => keyboards/pom_keyboards/tnln95/config.h +0 -1
@@ 37,7 37,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP // RGB will turn off when PC is put to sleep
// #define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
// #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
// #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 225 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
M keyboards/pom_keyboards/tnln95/info.json => keyboards/pom_keyboards/tnln95/info.json +3 -0
@@ 18,6 18,9 @@
"levels": 10,
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "C7"
},
M keyboards/program_yoink/config.h => keyboards/program_yoink/config.h +0 -1
@@ 22,7 22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
//#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/program_yoink/ortho/info.json => keyboards/program_yoink/ortho/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0xF10C",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D4"
},
M keyboards/program_yoink/staggered/info.json => keyboards/program_yoink/staggered/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0xF10B",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D4"
},
M keyboards/quad_h/lb75/config.h => keyboards/quad_h/lb75/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/quad_h/lb75/info.json => keyboards/quad_h/lb75/info.json +2 -1
@@ 21,7 21,8 @@
"pin": "B0"
},
"rgblight": {
- "max_brightness": 220
+ "max_brightness": 220,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/quarkeys/z40/config.h => keyboards/quarkeys/z40/config.h +0 -1
@@ 64,5 64,4 @@
#define RGBLIGHT_LAYERS
#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF
-#define RGBLIGHT_SLEEP
#endif=
\ No newline at end of file
M keyboards/quarkeys/z40/info.json => keyboards/quarkeys/z40/info.json +2 -1
@@ 12,7 12,8 @@
"driver": "WS2812"
},
"rgblight": {
- "max_brightness": 130
+ "max_brightness": 130,
+ "sleep": true
},
"matrix_pins": {
"cols": ["F4", "F5", "F6", "F7", "B6", "B5", "B4", "D7", "D6", "D0", "B1", "B0"],
M keyboards/quarkeys/z60/hotswap/config.h => keyboards/quarkeys/z60/hotswap/config.h +0 -1
@@ 32,4 32,3 @@
#define RGBLIGHT_LAYERS
#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF
-#define RGBLIGHT_SLEEP
M keyboards/quarkeys/z60/hotswap/info.json => keyboards/quarkeys/z60/hotswap/info.json +2 -1
@@ 16,7 16,8 @@
"pin": "D6"
},
"rgblight": {
- "max_brightness": 140
+ "max_brightness": 140,
+ "sleep": true
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4",
M keyboards/quarkeys/z60/solder/config.h => keyboards/quarkeys/z60/solder/config.h +0 -2
@@ 32,5 32,3 @@
#define RGBLIGHT_LAYERS
#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF
#define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2)
-
-#define RGBLIGHT_SLEEP
M keyboards/quarkeys/z60/solder/info.json => keyboards/quarkeys/z60/solder/info.json +2 -1
@@ 16,7 16,8 @@
"pin": "D6"
},
"rgblight": {
- "max_brightness": 180
+ "max_brightness": 180,
+ "sleep": true
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4",
M keyboards/quarkeys/z67/hotswap/config.h => keyboards/quarkeys/z67/hotswap/config.h +0 -1
@@ 32,4 32,3 @@
#define RGBLIGHT_LAYERS
#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF
-#define RGBLIGHT_SLEEP
M keyboards/quarkeys/z67/hotswap/info.json => keyboards/quarkeys/z67/hotswap/info.json +2 -1
@@ 16,7 16,8 @@
"pin": "F0"
},
"rgblight": {
- "max_brightness": 180
+ "max_brightness": 180,
+ "sleep": true
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4",
M keyboards/quarkeys/z67/solder/config.h => keyboards/quarkeys/z67/solder/config.h +0 -1
@@ 31,4 31,3 @@
#define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2)
#define RGBLIGHT_LAYERS
-#define RGBLIGHT_SLEEP
M keyboards/quarkeys/z67/solder/info.json => keyboards/quarkeys/z67/solder/info.json +2 -1
@@ 16,7 16,8 @@
"pin": "F0"
},
"rgblight": {
- "max_brightness": 180
+ "max_brightness": 180,
+ "sleep": true
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4",
M keyboards/qwertyydox/config.h => keyboards/qwertyydox/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/qwertyydox/info.json => keyboards/qwertyydox/info.json +3 -0
@@ 13,6 13,9 @@
"cols": ["F7", "F6", "F5", "C6", "D7", "D4", "D1"],
"rows": ["B6", "B2", "B3", "B1"]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D6"
},
M keyboards/rart/rart4x4/config.h => keyboards/rart/rart4x4/config.h +0 -1
@@ 37,4 37,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
M keyboards/rart/rart4x4/info.json => keyboards/rart/rart4x4/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "D3"
},
"rgblight": {
- "max_brightness": 240
+ "max_brightness": 240,
+ "sleep": true
},
"matrix_pins": {
"cols": ["F7", "B2", "B5", "B4"],
M keyboards/rart/rart67/config.h => keyboards/rart/rart67/config.h +0 -1
@@ 37,4 37,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
M keyboards/rart/rart67/info.json => keyboards/rart/rart67/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "B7"
},
"rgblight": {
- "max_brightness": 240
+ "max_brightness": 240,
+ "sleep": true
},
"matrix_pins": {
"cols": ["B3", "B2", "B1", "D5", "D4", "D6", "D7", "B4", "B5", "F0", "F7", "F6", "F5", "F4", "F1", "E6"],
M keyboards/rart/rart75hs/config.h => keyboards/rart/rart75hs/config.h +0 -1
@@ 34,4 34,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
M keyboards/rart/rart75hs/info.json => keyboards/rart/rart75hs/info.json +2 -1
@@ 26,7 26,8 @@
"pin": "C0"
},
"rgblight": {
- "max_brightness": 240
+ "max_brightness": 240,
+ "sleep": true
},
"bootmagic": {
"matrix": [0, 1]
M keyboards/rart/rart80/config.h => keyboards/rart/rart80/config.h +0 -1
@@ 34,4 34,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
M keyboards/rart/rart80/info.json => keyboards/rart/rart80/info.json +2 -1
@@ 21,7 21,8 @@
"pin": "D5"
},
"rgblight": {
- "max_brightness": 240
+ "max_brightness": 240,
+ "sleep": true
},
"bootmagic": {
"matrix": [0, 1]
M keyboards/rart/rartpad/config.h => keyboards/rart/rartpad/config.h +0 -1
@@ 37,4 37,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
M keyboards/rart/rartpad/info.json => keyboards/rart/rartpad/info.json +2 -1
@@ 26,7 26,8 @@
"pin": "F7"
},
"rgblight": {
- "max_brightness": 240
+ "max_brightness": 240,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "caterina",
M keyboards/recompile_keys/mio/config.h => keyboards/recompile_keys/mio/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/recompile_keys/mio/info.json => keyboards/recompile_keys/mio/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x4D41",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B3"
},
M keyboards/retro_75/config.h => keyboards/retro_75/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/reviung/reviung33/config.h => keyboards/reviung/reviung33/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 16
# define RGBLIGHT_SAT_STEP 16
# define RGBLIGHT_VAL_STEP 16
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/reviung/reviung33/info.json => keyboards/reviung/reviung33/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x516D",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/reviung/reviung41/config.h => keyboards/reviung/reviung41/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 16
#define RGBLIGHT_SAT_STEP 16
#define RGBLIGHT_VAL_STEP 16
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/reviung/reviung41/info.json => keyboards/reviung/reviung41/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0xDCCB",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/reviung/reviung5/config.h => keyboards/reviung/reviung5/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 16
# define RGBLIGHT_SAT_STEP 16
# define RGBLIGHT_VAL_STEP 16
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/reviung/reviung5/info.json => keyboards/reviung/reviung5/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x4F0D",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/reviung/reviung53/config.h => keyboards/reviung/reviung53/config.h +0 -1
@@ 7,7 7,6 @@
#define RGBLIGHT_HUE_STEP 16
#define RGBLIGHT_SAT_STEP 16
#define RGBLIGHT_VAL_STEP 16
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/reviung/reviung53/info.json => keyboards/reviung/reviung53/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x4E09",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/rmi_kb/squishyfrl/config.h => keyboards/rmi_kb/squishyfrl/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/rmi_kb/squishytkl/config.h => keyboards/rmi_kb/squishytkl/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/rmi_kb/tkl_ff/v2/config.h => keyboards/rmi_kb/tkl_ff/v2/config.h +0 -1
@@ 23,7 23,6 @@
# define RGBLIGHT_HUE_STEP 32
# define RGBLIGHT_SAT_STEP 32
# define RGBLIGHT_VAL_STEP 32
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/rmi_kb/wete/v2/config.h => keyboards/rmi_kb/wete/v2/config.h +0 -1
@@ 24,7 24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 32
# define RGBLIGHT_SAT_STEP 32
# define RGBLIGHT_VAL_STEP 32
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/rocketboard_16/config.h => keyboards/rocketboard_16/config.h +0 -1
@@ 29,7 29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_TWINKLE
#define RGBLED_NUM 16
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
// OLED stuff
#define OLED_DISPLAY_128X64
M keyboards/rocketboard_16/info.json => keyboards/rocketboard_16/info.json +3 -0
@@ 24,6 24,9 @@
"bootmagic": {
"matrix": [4, 1]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "A4"
},
M keyboards/runes/vaengr/config.h => keyboards/runes/vaengr/config.h +0 -1
@@ 31,7 31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*
* Feature disable options
M keyboards/runes/vaengr/info.json => keyboards/runes/vaengr/info.json +3 -0
@@ 9,6 9,9 @@
"device_version": "0.0.1",
"force_nkro": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "C7"
},
M keyboards/rura66/rev1/config.h => keyboards/rura66/rev1/config.h +0 -1
@@ 26,7 26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RGB_TEST
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== choose animations ==*/
// #define RGBLIGHT_EFFECT_BREATHING
M keyboards/sam/s80/config.h => keyboards/sam/s80/config.h +0 -1
@@ 20,7 20,6 @@
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// generated by KBFirmware JSON to QMK Parser
// https://noroadsleft.github.io/kbf_qmk_converter/
M keyboards/sam/sg81m/config.h => keyboards/sam/sg81m/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/sam/sg81m/info.json => keyboards/sam/sg81m/info.json +3 -0
@@ 16,6 16,9 @@
"indicators": {
"caps_lock": "B0"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E6"
},
M keyboards/sawnsprojects/amber80/solder/config.h => keyboards/sawnsprojects/amber80/solder/config.h +0 -1
@@ 21,7 21,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== or choose animations ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/sawnsprojects/amber80/solder/info.json => keyboards/sawnsprojects/amber80/solder/info.json +3 -0
@@ 18,6 18,9 @@
"scroll_lock": "B0",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D2"
},
M keyboards/sawnsprojects/krush/krush60/solder/config.h => keyboards/sawnsprojects/krush/krush60/solder/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/sawnsprojects/krush/krush60/solder/info.json => keyboards/sawnsprojects/krush/krush60/solder/info.json +2 -1
@@ 21,7 21,8 @@
"pin": "F1"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/sawnsprojects/krush/krush65/hotswap/config.h => keyboards/sawnsprojects/krush/krush65/hotswap/config.h +0 -1
@@ 26,7 26,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/sawnsprojects/krush/krush65/hotswap/info.json => keyboards/sawnsprojects/krush/krush65/hotswap/info.json +2 -1
@@ 26,7 26,8 @@
"pin": "E6"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/sawnsprojects/krush/krush65/solder/config.h => keyboards/sawnsprojects/krush/krush65/solder/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/sawnsprojects/krush/krush65/solder/info.json => keyboards/sawnsprojects/krush/krush65/solder/info.json +2 -1
@@ 26,7 26,8 @@
"pin": "F1"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/sawnsprojects/satxri6key/config.h => keyboards/sawnsprojects/satxri6key/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/sawnsprojects/satxri6key/info.json => keyboards/sawnsprojects/satxri6key/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0727",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F0"
},
M keyboards/sawnsprojects/vcl65/solder/config.h => keyboards/sawnsprojects/vcl65/solder/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
/*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
M keyboards/sawnsprojects/vcl65/solder/info.json => keyboards/sawnsprojects/vcl65/solder/info.json +2 -1
@@ 21,7 21,8 @@
"pin": "B7"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/sck/osa/config.h => keyboards/sck/osa/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*
* Feature disable options
M keyboards/sck/osa/info.json => keyboards/sck/osa/info.json +3 -0
@@ 18,6 18,9 @@
"num_lock": "C7",
"scroll_lock": "B6"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D4"
},
M keyboards/sendyyeah/pix/config.h => keyboards/sendyyeah/pix/config.h +0 -1
@@ 29,7 29,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/sendyyeah/pix/info.json => keyboards/sendyyeah/pix/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x4E34",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B5"
},
M keyboards/senselessclay/ck65/config.h => keyboards/senselessclay/ck65/config.h +0 -1
@@ 50,5 50,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL+5
M keyboards/senselessclay/ck65/info.json => keyboards/senselessclay/ck65/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "B1"
},
"rgblight": {
- "max_brightness": 122
+ "max_brightness": 122,
+ "sleep": true
},
"matrix_pins": {
"cols": ["F0", "D5", "D3", "D2", "D1", "D0", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
M keyboards/senselessclay/gos65/config.h => keyboards/senselessclay/gos65/config.h +0 -1
@@ 50,4 50,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_SLEEP
M keyboards/senselessclay/gos65/info.json => keyboards/senselessclay/gos65/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "B0"
},
"rgblight": {
- "max_brightness": 125
+ "max_brightness": 125,
+ "sleep": true
},
"matrix_pins": {
"cols": ["F4", "D5", "D3", "D2", "D1", "D0", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
M keyboards/sentraq/number_pad/config.h => keyboards/sentraq/number_pad/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/sentraq/number_pad/info.json => keyboards/sentraq/number_pad/info.json +3 -0
@@ 7,6 7,9 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B0"
},
M keyboards/sentraq/s65_x/config.h => keyboards/sentraq/s65_x/config.h +0 -1
@@ 15,7 15,6 @@
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 20
-#define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/sentraq/s65_x/info.json => keyboards/sentraq/s65_x/info.json +3 -0
@@ 18,6 18,9 @@
"levels": 5,
"as_caps_lock": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/silverbullet44/config.h => keyboards/silverbullet44/config.h +0 -1
@@ 38,7 38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- //#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/skeletn87/hotswap/config.h => keyboards/skeletn87/hotswap/config.h +0 -1
@@ 31,4 31,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
M keyboards/skeletn87/hotswap/info.json => keyboards/skeletn87/hotswap/info.json +2 -1
@@ 26,7 26,8 @@
"pin": "B3"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/skeletn87/soldered/config.h => keyboards/skeletn87/soldered/config.h +0 -1
@@ 31,4 31,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
M keyboards/skeletn87/soldered/info.json => keyboards/skeletn87/soldered/info.json +2 -1
@@ 26,7 26,8 @@
"pin": "B2"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/skeletonkbd/skeletonnumpad/config.h => keyboards/skeletonkbd/skeletonnumpad/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/skeletonkbd/skeletonnumpad/info.json => keyboards/skeletonkbd/skeletonnumpad/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "D4"
},
"rgblight": {
- "max_brightness": 120
+ "max_brightness": 120,
+ "sleep": true
},
"matrix_pins": {
"cols": ["D6", "D7", "B4", "B5"],
M keyboards/skippys_custom_pcs/roopad/config.h => keyboards/skippys_custom_pcs/roopad/config.h +0 -1
@@ 18,7 18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
#define RGBLED_NUM 21
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_BREATHING
M keyboards/skippys_custom_pcs/roopad/info.json => keyboards/skippys_custom_pcs/roopad/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B6"
},
M keyboards/sofle/keyhive/config.h => keyboards/sofle/keyhive/config.h +0 -1
@@ 36,5 36,4 @@
# define RGBLIGHT_SAT_STEP 17
# define RGBLIGHT_VAL_STEP 17
//# define RGBLIGHT_LAYERS //Enable layer light indicators. Not required as updates are done in layer_state_set_user and led_update_user (+588).
-# define RGBLIGHT_SLEEP //Turn off LEDs when computer sleeping (+72)
#endif
M keyboards/sofle/keyhive/info.json => keyboards/sofle/keyhive/info.json +1 -0
@@ 12,6 12,7 @@
"rgblight": {
"max_brightness": 100,
"led_map": [28, 16, 4, 1, 13, 25, 10, 36, 35, 34, 33, 32, 31, 30, 29, 27, 26, 24, 23, 22, 21, 20, 19, 18, 17, 15, 14, 12, 11, 9, 8, 7, 6, 5, 3, 2, 0, 45, 57, 69, 72, 60, 48, 63, 37, 38, 39, 40, 41, 42, 43, 44, 46, 47, 49, 50, 51, 52, 53, 54, 55, 56, 58, 59, 61, 62, 64, 65, 66, 67, 68, 70, 71, 73],
+ "sleep": true,
"split_count": [37, 37]
},
"matrix_pins": {
M keyboards/splitkb/zima/config.h => keyboards/splitkb/zima/config.h +0 -1
@@ 25,7 25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/splitkb/zima/info.json => keyboards/splitkb/zima/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0xF75B",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B5"
},
M keyboards/stello65/hs_rev1/config.h => keyboards/stello65/hs_rev1/config.h +0 -1
@@ 7,7 7,6 @@
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/stello65/sl_rev1/config.h => keyboards/stello65/sl_rev1/config.h +0 -1
@@ 7,7 7,6 @@
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/stratos/config.h => keyboards/stratos/config.h +0 -1
@@ 23,7 23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/stratos/info.json => keyboards/stratos/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "D2"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"matrix_pins": {
"cols": ["F4", "F7", "F5", "F6", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3"],
M keyboards/studiokestra/bourgeau/config.h => keyboards/studiokestra/bourgeau/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/studiokestra/bourgeau/info.json => keyboards/studiokestra/bourgeau/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x7501",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B7"
},
M keyboards/studiokestra/cascade/config.h => keyboards/studiokestra/cascade/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/studiokestra/cascade/info.json => keyboards/studiokestra/cascade/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x6001",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B0"
},
M keyboards/studiokestra/frl84/config.h => keyboards/studiokestra/frl84/config.h +0 -1
@@ 7,7 7,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/studiokestra/frl84/info.json => keyboards/studiokestra/frl84/info.json +2 -1
@@ 21,7 21,8 @@
"pin": "B0"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "atmega32u4",
"url": "",
M keyboards/studiokestra/galatea/rev2/config.h => keyboards/studiokestra/galatea/rev2/config.h +0 -1
@@ 7,7 7,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/studiokestra/galatea/rev2/info.json => keyboards/studiokestra/galatea/rev2/info.json +2 -1
@@ 33,7 33,8 @@
"pin": "D4"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"layouts": {
"LAYOUT": {
M keyboards/takashicompany/center_enter/config.h => keyboards/takashicompany/center_enter/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/takashicompany/center_enter/info.json => keyboards/takashicompany/center_enter/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0012",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/takashicompany/compacx/config.h => keyboards/takashicompany/compacx/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/takashicompany/compacx/info.json => keyboards/takashicompany/compacx/info.json +1 -0
@@ 9,6 9,7 @@
"device_version": "0.0.1"
},
"rgblight": {
+ "sleep": true,
"split_count": [6, 6]
},
"ws2812": {
M keyboards/takashicompany/endzone34/config.h => keyboards/takashicompany/endzone34/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/takashicompany/endzone34/info.json => keyboards/takashicompany/endzone34/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0006",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/takashicompany/heavy_left/config.h => keyboards/takashicompany/heavy_left/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/takashicompany/heavy_left/info.json => keyboards/takashicompany/heavy_left/info.json +1 -0
@@ 9,6 9,7 @@
"device_version": "0.0.1"
},
"rgblight": {
+ "sleep": true,
"split_count": [6, 6]
},
"ws2812": {
M keyboards/takashicompany/minizone/config.h => keyboards/takashicompany/minizone/config.h +0 -1
@@ 7,7 7,6 @@
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/takashicompany/minizone/info.json => keyboards/takashicompany/minizone/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0021",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/takashicompany/qoolee/config.h => keyboards/takashicompany/qoolee/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/takashicompany/qoolee/info.json => keyboards/takashicompany/qoolee/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0013",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/takashicompany/radialex/config.h => keyboards/takashicompany/radialex/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/takashicompany/radialex/info.json => keyboards/takashicompany/radialex/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0019",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/taleguers/taleguers75/config.h => keyboards/taleguers/taleguers75/config.h +0 -1
@@ 36,4 36,3 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
M keyboards/taleguers/taleguers75/info.json => keyboards/taleguers/taleguers75/info.json +1 -0
@@ 19,6 19,7 @@
]
},
"rgblight": {
+ "sleep": true,
"led_map": [5, 4, 3, 2, 1, 0]
},
"ws2812": {
M keyboards/tanuki/config.h => keyboards/tanuki/config.h +0 -1
@@ 36,7 36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
-#define RGBLIGHT_SLEEP
#define TAPPING_TERM 200
/*
M keyboards/tanuki/info.json => keyboards/tanuki/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x6464",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D1"
},
M keyboards/teahouse/ayleen/config.h => keyboards/teahouse/ayleen/config.h +0 -1
@@ 9,7 9,6 @@
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_LAYERS 2
#define RGBLIGHT_LAYER_BLINK
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// generated by KBFirmware JSON to QMK Parser
// https://noroadsleft.github.io/kbf_qmk_converter/
M keyboards/teahouse/ayleen/info.json => keyboards/teahouse/ayleen/info.json +3 -0
@@ 19,6 19,9 @@
"rows": ["F0", "F1", "F4", "F5", "D4", "B0", "B1", "B2", "F7", "D5", "D3"],
"cols": ["F6", "D0", "D1", "D2", "D6", "D7", "B4", "B5", "B6"]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "C7"
},
M keyboards/team0110/p1800fl/config.h => keyboards/team0110/p1800fl/config.h +0 -1
@@ 32,7 32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/team0110/p1800fl/info.json => keyboards/team0110/p1800fl/info.json +3 -0
@@ 18,6 18,9 @@
"levels": 5,
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "C6"
},
M keyboards/technika/config.h => keyboards/technika/config.h +0 -1
@@ 23,7 23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LOCKING_RESYNC_ENABLE
#define RGBLED_NUM 16
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/technika/info.json => keyboards/technika/info.json +2 -1
@@ 22,7 22,8 @@
"pin": "B15"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "STM32F072",
"bootloader": "stm32-dfu",
M keyboards/tenki/config.h => keyboards/tenki/config.h +0 -1
@@ 22,4 22,3 @@
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 10
#define RGBLIGHT_VAL_STEP 10
-#define RGBLIGHT_SLEEP
M keyboards/tenki/info.json => keyboards/tenki/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x5445",
"device_version": "10.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D1"
},
M keyboards/tetris/config.h => keyboards/tetris/config.h +0 -1
@@ 22,7 22,6 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_SLEEP
#define RGBLED_NUM 47
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
M keyboards/tetris/info.json => keyboards/tetris/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x6060",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F5"
},
M keyboards/tg4x/config.h => keyboards/tg4x/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/tg4x/info.json => keyboards/tg4x/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0458",
"device_version": "0.2.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D2"
},
M keyboards/themadnoodle/ncc1701kb/v2/config.h => keyboards/themadnoodle/ncc1701kb/v2/config.h +0 -1
@@ 19,7 19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* RGB BackLight */
#define RGBLED_NUM 4
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/themadnoodle/ncc1701kb/v2/info.json => keyboards/themadnoodle/ncc1701kb/v2/info.json +3 -0
@@ 18,6 18,9 @@
{"pin_a": "D0", "pin_b": "D1"}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B7"
},
M keyboards/themadnoodle/noodlepad/config.h => keyboards/themadnoodle/noodlepad/config.h +0 -1
@@ 19,7 19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* RGB BackLight */
#define RGBLED_NUM 4
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/themadnoodle/noodlepad/info.json => keyboards/themadnoodle/noodlepad/info.json +3 -0
@@ 18,6 18,9 @@
{"pin_a": "D0", "pin_b": "D1"}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B7"
},
M keyboards/thevankeyboards/minivan/config.h => keyboards/thevankeyboards/minivan/config.h +0 -1
@@ 24,4 24,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* RGB Setup */
#define RGBLED_NUM 3
-#define RGBLIGHT_SLEEP
M keyboards/thevankeyboards/minivan/info.json => keyboards/thevankeyboards/minivan/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x8844",
"device_version": "0.0.2"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D0"
},
M keyboards/tkc/m0lly/config.h => keyboards/tkc/m0lly/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 5
# define RGBLIGHT_SAT_STEP 10
# define RGBLIGHT_VAL_STEP 10
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/tkc/osav2/config.h => keyboards/tkc/osav2/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define RGBLIGHT_HUE_STEP 10
// #define RGBLIGHT_SAT_STEP 17
// #define RGBLIGHT_VAL_STEP 17
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/tkc/osav2/info.json => keyboards/tkc/osav2/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0005",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D4"
},
M keyboards/tkc/tkl_ab87/config.h => keyboards/tkc/tkl_ab87/config.h +0 -1
@@ 24,7 24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/tkc/tkl_ab87/info.json => keyboards/tkc/tkl_ab87/info.json +2 -1
@@ 25,7 25,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/tmo50/config.h => keyboards/tmo50/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/tmo50/info.json => keyboards/tmo50/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B7",
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "C7"
},
M keyboards/trashman/ketch/config.h => keyboards/trashman/ketch/config.h +0 -1
@@ 33,5 33,4 @@ SOFTWARE.
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_SLEEP
#define NO_USB_STARTUP_CHECK
M keyboards/trashman/ketch/info.json => keyboards/trashman/ketch/info.json +3 -0
@@ 9,6 9,9 @@
"device_version": "0.0.1",
"max_power": 100
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F4"
},
M keyboards/tszaboo/ortho4exent/config.h => keyboards/tszaboo/ortho4exent/config.h +0 -1
@@ 22,7 22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/tszaboo/ortho4exent/info.json => keyboards/tszaboo/ortho4exent/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x7934",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B6"
},
M keyboards/ubest/vn/config.h => keyboards/ubest/vn/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #define RGBLIGHT_EFFECT_BREATHING
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/ubest/vn/info.json => keyboards/ubest/vn/info.json +2 -1
@@ 20,7 20,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 240
+ "max_brightness": 240,
+ "sleep": true
},
"indicators": {
"caps_lock": "B3",
M keyboards/unison/v04/config.h => keyboards/unison/v04/config.h +0 -1
@@ 30,7 30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 4
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== Lighting Layers ==*/
#define RGBLIGHT_LAYERS
// #define RGBLIGHT_MAX_LAYERS 2
M keyboards/waldo/config.h => keyboards/waldo/config.h +0 -1
@@ 53,4 53,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP
M keyboards/waldo/info.json => keyboards/waldo/info.json +3 -0
@@ 16,6 16,9 @@
"pin": "B7",
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B0"
},
M keyboards/wavtype/foundation/config.h => keyboards/wavtype/foundation/config.h +0 -1
@@ 7,7 7,6 @@
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/wavtype/foundation/info.json => keyboards/wavtype/foundation/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0003",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B0"
},
M keyboards/wavtype/p01_ultra/config.h => keyboards/wavtype/p01_ultra/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== or choose animations ==*/
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/wavtype/p01_ultra/info.json => keyboards/wavtype/p01_ultra/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x0004",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E6"
},
M keyboards/westfoxtrot/aanzee/config.h => keyboards/westfoxtrot/aanzee/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 12
#define RGBLIGHT_SAT_STEP 25
#define RGBLIGHT_VAL_STEP 12
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/westfoxtrot/aanzee/info.json => keyboards/westfoxtrot/aanzee/info.json +3 -0
@@ 22,6 22,9 @@
"caps_lock": "B2",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E6"
},
M keyboards/westfoxtrot/cypher/rev5/config.h => keyboards/westfoxtrot/cypher/rev5/config.h +0 -1
@@ 31,7 31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 12
#define RGBLIGHT_SAT_STEP 25
#define RGBLIGHT_VAL_STEP 12
- #define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/westfoxtrot/cypher/rev5/info.json => keyboards/westfoxtrot/cypher/rev5/info.json +3 -0
@@ 16,6 16,9 @@
"levels": 5,
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E6"
},
M keyboards/winry/winry315/config.h => keyboards/winry/winry315/config.h +0 -1
@@ 20,7 20,6 @@
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/winry/winry315/info.json => keyboards/winry/winry315/info.json +2 -1
@@ 12,7 12,8 @@
"driver": "WS2812"
},
"rgblight": {
- "max_brightness": 150
+ "max_brightness": 150,
+ "sleep": true
},
"encoder": {
"rotary": [
M keyboards/wolf/ts60/config.h => keyboards/wolf/ts60/config.h +0 -1
@@ 29,7 29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_SLEEP
#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL
#define BACKLIGHT_DEFAULT_LEVEL 6
M keyboards/wolf/ts60/info.json => keyboards/wolf/ts60/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B7",
"levels": 6
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D0"
},
M keyboards/wolfmarkclub/wm1/config.h => keyboards/wolfmarkclub/wm1/config.h +0 -1
@@ 31,7 31,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
M keyboards/wolfmarkclub/wm1/info.json => keyboards/wolfmarkclub/wm1/info.json +3 -0
@@ 8,6 8,9 @@
"pid": "0x2B29",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "A3"
},
M keyboards/work_louder/loop/config.h => keyboards/work_louder/loop/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== or choose animations ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/work_louder/loop/info.json => keyboards/work_louder/loop/info.json +2 -1
@@ 30,7 30,8 @@
"pin": "F1"
},
"rgblight": {
- "max_brightness": 120
+ "max_brightness": 120,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/work_louder/micro/config.h => keyboards/work_louder/micro/config.h +0 -1
@@ 12,7 12,6 @@
// #define RGB_MATRIX_KEYPRESSES
#define RGBLIGHT_DI_PIN D2
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_STATIC_GRADIENT + 9
#define RGBLIGHT_DEFAULT_HUE 213
M keyboards/work_louder/micro/info.json => keyboards/work_louder/micro/info.json +2 -1
@@ 37,7 37,8 @@
"hue_steps": 8,
"led_count": 8,
"max_brightness": 150,
- "saturation_steps": 8
+ "saturation_steps": 8,
+ "sleep": true
},
"ws2812": {
"pin": "D1"
M keyboards/work_louder/nano/config.h => keyboards/work_louder/nano/config.h +0 -1
@@ 22,7 22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== or choose animations ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/work_louder/nano/info.json => keyboards/work_louder/nano/info.json +2 -1
@@ 26,7 26,8 @@
"pin": "F6"
},
"rgblight": {
- "max_brightness": 120
+ "max_brightness": 120,
+ "sleep": true
},
"bootmagic": {
"matrix": [0, 2]
M keyboards/work_louder/work_board/config.h => keyboards/work_louder/work_board/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== or choose animations ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/work_louder/work_board/info.json => keyboards/work_louder/work_board/info.json +2 -1
@@ 25,7 25,8 @@
"pin": "D1"
},
"rgblight": {
- "max_brightness": 120
+ "max_brightness": 120,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/wuque/creek70/config.h => keyboards/wuque/creek70/config.h +0 -1
@@ 20,7 20,6 @@
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/wuque/creek70/info.json => keyboards/wuque/creek70/info.json +2 -1
@@ 30,7 30,8 @@
"pin": "D0"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"layouts": {
"LAYOUT": {
M keyboards/wuque/ikki68/config.h => keyboards/wuque/ikki68/config.h +0 -1
@@ 27,7 27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*======= RGB function=======*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/wuque/ikki68/info.json => keyboards/wuque/ikki68/info.json +2 -1
@@ 12,7 12,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"matrix_pins": {
"cols": ["D1", "D0", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "F0", "F1", "B6", "F4", "F5", "F6", "F7"],
M keyboards/wuque/ikki68_aurora/config.h => keyboards/wuque/ikki68_aurora/config.h +0 -1
@@ 27,7 27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*======= RGB function=======*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/wuque/ikki68_aurora/info.json => keyboards/wuque/ikki68_aurora/info.json +2 -1
@@ 21,7 21,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/wuque/promise87/ansi/config.h => keyboards/wuque/promise87/ansi/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*======= RGB function=======*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/wuque/promise87/ansi/info.json => keyboards/wuque/promise87/ansi/info.json +2 -1
@@ 21,7 21,8 @@
"pin": "D2"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/wuque/promise87/wkl/config.h => keyboards/wuque/promise87/wkl/config.h +0 -1
@@ 20,7 20,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*======= RGB function=======*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/wuque/promise87/wkl/info.json => keyboards/wuque/promise87/wkl/info.json +2 -1
@@ 21,7 21,8 @@
"pin": "D2"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/xiudi/xd75/config.h => keyboards/xiudi/xd75/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 12
# define RGBLIGHT_SAT_STEP 25
# define RGBLIGHT_VAL_STEP 12
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/xiudi/xd84pro/config.h => keyboards/xiudi/xd84pro/config.h +0 -1
@@ 20,7 20,6 @@
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/xiudi/xd84pro/info.json => keyboards/xiudi/xd84pro/info.json +3 -0
@@ 22,6 22,9 @@
"caps_lock": "B2",
"on_state": 0
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "F6"
},
M keyboards/yandrstudio/eau_r2/config.h => keyboards/yandrstudio/eau_r2/config.h +0 -1
@@ 18,7 18,6 @@
#ifdef RGBLIGHT_ENABLE
# define RGBLED_NUM 12
-# define RGBLIGHT_SLEEP
# define RGBLIGHT_VAL_STEP 5
# define RGBLIGHT_EFFECT_BREATHING
M keyboards/yandrstudio/eau_r2/info.json => keyboards/yandrstudio/eau_r2/info.json +2 -1
@@ 15,7 15,8 @@
"pin": "A8"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "sleep": true
},
"debounce": 8,
"layouts": {
M keyboards/yeehaw/config.h => keyboards/yeehaw/config.h +0 -1
@@ 19,7 19,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/yeehaw/info.json => keyboards/yeehaw/info.json +3 -0
@@ 13,6 13,9 @@
{"pin_a": "D1", "pin_b": "D0"}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "B2"
},
M keyboards/ymdk/np21/config.h => keyboards/ymdk/np21/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define RGBLIGHT_HUE_STEP 8
//#define RGBLIGHT_SAT_STEP 8
//#define RGBLIGHT_VAL_STEP 8
-//#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/ymdk/sp64/config.h => keyboards/ymdk/sp64/config.h +0 -1
@@ 28,7 28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/ymdk/sp64/info.json => keyboards/ymdk/sp64/info.json +2 -1
@@ 17,7 17,8 @@
"driver": "i2c"
},
"rgblight": {
- "max_brightness": 250
+ "max_brightness": 250,
+ "sleep": true
},
"processor": "atmega32a",
"bootloader": "bootloadhid",
M keyboards/ymdk/wings/config.h => keyboards/ymdk/wings/config.h +0 -1
@@ 29,4 29,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
M keyboards/ymdk/wings/info.json => keyboards/ymdk/wings/info.json +3 -0
@@ 17,6 17,9 @@
"pin": "B6",
"levels": 5
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/ymdk/wingshs/config.h => keyboards/ymdk/wingshs/config.h +0 -1
@@ 27,4 27,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
M keyboards/ymdk/wingshs/info.json => keyboards/ymdk/wingshs/info.json +2 -1
@@ 25,7 25,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 160
+ "max_brightness": 160,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/ymdk/ym68/config.h => keyboards/ymdk/ym68/config.h +0 -1
@@ 21,7 21,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/ymdk/ym68/info.json => keyboards/ymdk/ym68/info.json +3 -0
@@ 18,6 18,9 @@
"levels": 5,
"breathing": true
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "E2"
},
M keyboards/ymdk/ymd21/v2/config.h => keyboards/ymdk/ymd21/v2/config.h +0 -1
@@ 21,7 21,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/ymdk/ymd21/v2/info.json => keyboards/ymdk/ymd21/v2/info.json +2 -1
@@ 21,7 21,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 180
+ "max_brightness": 180,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/ymdk/ymd40/v2/config.h => keyboards/ymdk/ymd40/v2/config.h +0 -1
@@ 21,7 21,6 @@
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/ymdk/ymd40/v2/info.json => keyboards/ymdk/ymd40/v2/info.json +2 -1
@@ 21,7 21,8 @@
"pin": "E2"
},
"rgblight": {
- "max_brightness": 150
+ "max_brightness": 150,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
M keyboards/yoichiro/lunakey_macro/config.h => keyboards/yoichiro/lunakey_macro/config.h +0 -1
@@ 34,7 34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// #define RGBLIGHT_LAYERS
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
M keyboards/yoichiro/lunakey_macro/info.json => keyboards/yoichiro/lunakey_macro/info.json +3 -0
@@ 13,6 13,9 @@
"rows": ["E6", "B4", "B5"]
},
"diode_direction": "COL2ROW",
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},
M keyboards/yoichiro/lunakey_mini/config.h => keyboards/yoichiro/lunakey_mini/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/yoichiro/lunakey_mini/info.json => keyboards/yoichiro/lunakey_mini/info.json +1 -0
@@ 17,6 17,7 @@
"soft_serial_pin": "D2"
},
"rgblight": {
+ "sleep": true,
"led_map": [0, 1, 2, 3, 4, 5, 11, 10, 9, 8, 7, 6],
"split_count": [6, 6]
},
M keyboards/yushakobo/navpad/10/config.h => keyboards/yushakobo/navpad/10/config.h +0 -1
@@ 21,7 21,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
//# define RGBLIGHT_EFFECT_BREATHING
//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/yushakobo/navpad/10/info.json => keyboards/yushakobo/navpad/10/info.json +2 -1
@@ 16,7 16,8 @@
"pin": "D3"
},
"rgblight": {
- "max_brightness": 120
+ "max_brightness": 120,
+ "sleep": true
},
"processor": "atmega32u4",
"bootloader": "caterina"
M keyboards/yushakobo/navpad/10_helix_r/config.h => keyboards/yushakobo/navpad/10_helix_r/config.h +0 -1
@@ 22,7 22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
//# define RGBLIGHT_EFFECT_BREATHING
//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/yushakobo/navpad/10_helix_r/info.json => keyboards/yushakobo/navpad/10_helix_r/info.json +1 -0
@@ 40,6 40,7 @@
"rgblight": {
"max_brightness": 120,
"led_map": [0, 1, 2, 3, 4, 5, 6, 8, 7, 9, 10, 11, 12, 13, 14, 20, 19, 18, 17, 16, 15, 21, 22, 23, 24, 25, 26, 33, 32, 31, 30, 29, 28, 27, 34, 35, 36, 37, 38, 39, 40],
+ "sleep": true,
"split_count": [9, 32]
},
"processor": "atmega32u4",
M keyboards/yushakobo/quick17/config.h => keyboards/yushakobo/quick17/config.h +0 -1
@@ 45,7 45,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
//# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/yushakobo/quick7/config.h => keyboards/yushakobo/quick7/config.h +0 -1
@@ 22,7 22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
//# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
M keyboards/yushakobo/quick7/info.json => keyboards/yushakobo/quick7/info.json +3 -0
@@ 14,6 14,9 @@
{"pin_a": "F5", "pin_b": "F6"}
]
},
+ "rgblight": {
+ "sleep": true
+ },
"ws2812": {
"pin": "D3"
},