A keyboards/infinity_ergodox/MEMO.txt => keyboards/infinity_ergodox/MEMO.txt +385 -0
@@ 0,0 1,385 @@
+flabbergast's TMK/ChibiOS port
+==============================
+2015/10/16
+
+
+Build
+-----
+$ git clone -b chibios https://github.com/flabbergast/tmk_keyboard.git
+
+$ cd tmk_keyboard
+$ git submodule add -f -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios
+or
+$ cd tmk_keyboard/tmk_core/tool/chibios
+$ git clone -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios
+
+$ cd tmk_keyboard/keyboard/infinity_chibios
+$ make
+
+
+
+
+Chibios Configuration
+---------------------
+halconf.h: for HAL configuration
+ placed in project directory
+ read in chibios/os/hal/hal.mk
+ included in chibios/os/hal/include/hal.h
+mcuconf.h: for MCU configuration
+ placed in project directory
+ included in halconf.h
+
+
+Chibios Term
+------------
+PAL = Port Abstraction Layer
+ palWritePad
+ palReadPad
+ palSetPad
+ chibios/os/hal/include/pal.h
+
+LLD = Low Level Driver
+
+
+Makefile
+--------
+ # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = KINETIS
+ MCU_SERIES = KL2x
+
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <this_dir>/ld/
+ MCU_LDSCRIPT = MKL26Z64
+
+ # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP = kl2x
+
+ # Board: it should exist either in <chibios>/os/hal/boards/
+ # or <this_dir>/boards
+ BOARD = PJRC_TEENSY_LC
+
+ MCU = cortex-m0
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 6
+
+
+halconf.h
+---------
+
+
+mcuconf.h
+---------
+
+
+chconf.h
+--------
+
+
+ld script
+---------
+--- ../../tmk_core/tool/chibios/chibios/os/common/ports/ARMCMx/compilers/GCC/ld/MKL26Z64.ld 2015-10-15 09:08:58.732904304 +0900
++++ ld/MKL26Z64.ld 2015-10-15 08:48:06.430215496 +0900
+@@ -27,7 +27,8 @@
+ {
+ flash0 : org = 0x00000000, len = 0xc0
+ flashcfg : org = 0x00000400, len = 0x10
+- flash : org = 0x00000410, len = 64k - 0x410
++ flash : org = 0x00000410, len = 62k - 0x410
++ eeprom_emu : org = 0x0000F800, len = 2k
+ ram : org = 0x1FFFF800, len = 8k
+ }
+
+@@ -35,6 +36,10 @@
+ __ram_size__ = LENGTH(ram);
+ __ram_end__ = __ram_start__ + __ram_size__;
+
++__eeprom_workarea_start__ = ORIGIN(eeprom_emu);
++__eeprom_workarea_size__ = LENGTH(eeprom_emu);
++__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__;
++
+ SECTIONS
+ {
+ . = 0;
+
+
+
+Configuration/Startup for Infinity 60%
+--------------------------------------
+Configuration:
+
+
+Clock:
+Inifinity
+ FEI(FLL Engaged Internal) mode with core clock:48MHz, bus clock:48MHz, flash clock:24MHz
+ Clock dividor:
+ SIM_CLKDIV1[OUTDIV1] = 0 divide-by-1 for core clock
+ SIM_CLKDIV1[OUTDIV2] = 0 divide-by-1 for bus clock
+ SIM_CLKDIV1[OUTDIV4] = 1 divide-by-2 for flash clock
+ Internal reference clock:
+ MCG_C1[IREFS] = 1 Internal Reference Select for clock source for FLL
+ MCG_C1[IRCLKEN] = 1 Internal Reference Clock Enable
+ FLL multipilication:
+ MCG_C4[DMX32] = 1
+ MCG_C4[DRST_DRS] = 01 FLL factor 1464 * 32.768kHz = 48MHz
+
+chibios/os/hal/ports/KINETIS/K20x/hal_lld.c
+ k20x_clock_init(): called in __early_init() defined in board.c
+ disable watchdog and configure clock
+
+ configurable macros:
+ KINETIS_NO_INIT: whether init or not
+ KINETIS_MCG_MODE: clock mode
+ KINETIS_MCG_MODE_FEI
+ KINETIS_MCG_MODE_PEE
+ hal/ports/KINETIS/K20x/hal_lld.h
+
+
+chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h
+ PALConfig pal_default_config
+ boardInit()
+ __early_init()
+ macro definitions for board infos, freq and mcu type
+
+chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c
+
+USB
+
+
+Startup
+-------
+ common/ports/ARMCMx/GCC/crt0_v[67]m.s
+ Reset_Handler: startup code
+ common/ports/ARMCMx/GCC/crt1.c
+ __core_init(): weak
+ __early_init(): weak
+ __late_init(): weak
+ __default_exit(): weak
+ called from Reset_Handler of crt0
+ common/ports/ARMCMx/GCC/vector.c
+ common/ports/ARMCMx/GCC/ld/*.ld
+
+chibios/os/common/ports/ARMCMx/compilers/GCC/
+├── crt0_v6m.s
+├── crt0_v7m.s
+├── crt1.c
+├── ld
+│ ├── MK20DX128BLDR3.ld
+│ ├── MK20DX128BLDR4.ld
+│ ├── MK20DX128.ld
+│ ├── MK20DX256.ld
+│ ├── MKL25Z128.ld
+│ ├── MKL26Z128.ld
+│ ├── MKL26Z64.ld
+│ └── STM32L476xG.ld
+├── mk
+│ ├── startup_k20x5.mk
+│ ├── startup_k20x7.mk
+│ ├── startup_k20x.mk
+│ ├── startup_kl2x.mk
+│ └── startup_stm32l4xx.mk
+├── rules.ld
+├── rules.mk
+└── vectors.c
+
+chibios/os/hal/
+├── boards
+│ ├── FREESCALE_FREEDOM_K20D50M
+│ │ ├── board.c
+│ │ ├── board.h
+│ │ └── board.mk
+│ ├── MCHCK_K20
+│ │ ├── board.c
+│ │ ├── board.h
+│ │ └── board.mk
+│ ├── PJRC_TEENSY_3
+│ │ ├── board.c
+│ │ ├── board.h
+│ │ └── board.mk
+│ ├── PJRC_TEENSY_3_1
+│ │ ├── board.c
+│ │ ├── board.h
+│ │ └── board.mk
+│ ├── PJRC_TEENSY_LC
+│ │ ├── board.c
+│ │ ├── board.h
+│ │ └── board.mk
+│ ├── readme.txt
+│ ├── simulator
+│ │ ├── board.c
+│ │ ├── board.h
+│ │ └── board.mk
+│ ├── ST_NUCLEO_F030R8
+│ │ ├── board.c
+│ │ ├── board.h
+│ │ ├── board.mk
+│ │ └── cfg
+│ │ └── board.chcfg
+├── hal.mk
+├── include
+│ ├── adc.h
+│ ├── can.h
+│ ├── dac.h
+│ ├── ext.h
+│ ├── gpt.h
+│ ├── hal_channels.h
+│ ├── hal_files.h
+│ ├── hal.h
+│ ├── hal_ioblock.h
+│ ├── hal_mmcsd.h
+│ ├── hal_queues.h
+│ ├── hal_streams.h
+│ ├── i2c.h
+│ ├── i2s.h
+│ ├── icu.h
+│ ├── mac.h
+│ ├── mii.h
+│ ├── mmc_spi.h
+│ ├── pal.h
+│ ├── pwm.h
+│ ├── rtc.h
+│ ├── sdc.h
+│ ├── serial.h
+│ ├── serial_usb.h
+│ ├── spi.h
+│ ├── st.h
+│ ├── uart.h
+│ └── usb.h
+├── lib
+│ └── streams
+│ ├── chprintf.c
+│ ├── chprintf.h
+│ ├── memstreams.c
+│ ├── memstreams.h
+│ ├── nullstreams.c
+│ └── nullstreams.h
+├── osal
+│ ├── nil
+│ │ ├── osal.c
+│ │ ├── osal.h
+│ │ └── osal.mk
+│ ├── os-less
+│ │ └── ARMCMx
+│ │ ├── osal.c
+│ │ ├── osal.h
+│ │ └── osal.mk
+│ └── rt
+│ ├── osal.c
+│ ├── osal.h
+│ └── osal.mk
+├── ports
+│ ├── AVR
+│ ├── common
+│ │ └── ARMCMx
+│ │ ├── mpu.h
+│ │ ├── nvic.c
+│ │ └── nvic.h
+│ ├── KINETIS
+│ │ ├── K20x
+│ │ │ ├── hal_lld.c
+│ │ │ ├── hal_lld.h
+│ │ │ ├── kinetis_registry.h
+│ │ │ ├── platform.dox
+│ │ │ ├── platform.mk
+│ │ │ ├── pwm_lld.c
+│ │ │ ├── pwm_lld.h
+│ │ │ ├── spi_lld.c
+│ │ │ └── spi_lld.h
+│ │ ├── KL2x
+│ │ │ ├── hal_lld.c
+│ │ │ ├── hal_lld.h
+│ │ │ ├── kinetis_registry.h
+│ │ │ ├── platform.mk
+│ │ │ ├── pwm_lld.c
+│ │ │ └── pwm_lld.h
+│ │ ├── LLD
+│ │ │ ├── adc_lld.c
+│ │ │ ├── adc_lld.h
+│ │ │ ├── ext_lld.c
+│ │ │ ├── ext_lld.h
+│ │ │ ├── gpt_lld.c
+│ │ │ ├── gpt_lld.h
+│ │ │ ├── i2c_lld.c
+│ │ │ ├── i2c_lld.h
+│ │ │ ├── pal_lld.c
+│ │ │ ├── pal_lld.h
+│ │ │ ├── serial_lld.c
+│ │ │ ├── serial_lld.h
+│ │ │ ├── st_lld.c
+│ │ │ ├── st_lld.h
+│ │ │ ├── usb_lld.c
+│ │ │ └── usb_lld.h
+│ │ └── README.md
+│ ├── LPC
+│ ├── simulator
+│ └── STM32
+├── src
+│ ├── adc.c
+│ ├── can.c
+│ ├── dac.c
+│ ├── ext.c
+│ ├── gpt.c
+│ ├── hal.c
+│ ├── hal_mmcsd.c
+│ ├── hal_queues.c
+│ ├── i2c.c
+│ ├── i2s.c
+│ ├── icu.c
+│ ├── mac.c
+│ ├── mmc_spi.c
+│ ├── pal.c
+│ ├── pwm.c
+│ ├── rtc.c
+│ ├── sdc.c
+│ ├── serial.c
+│ ├── serial_usb.c
+│ ├── spi.c
+│ ├── st.c
+│ ├── uart.c
+│ └── usb.c
+└── templates
+ ├── adc_lld.c
+ ├── adc_lld.h
+ ├── can_lld.c
+ ├── can_lld.h
+ ├── dac_lld.c
+ ├── dac_lld.h
+ ├── ext_lld.c
+ ├── ext_lld.h
+ ├── gpt_lld.c
+ ├── gpt_lld.h
+ ├── halconf.h
+ ├── hal_lld.c
+ ├── hal_lld.h
+ ├── i2c_lld.c
+ ├── i2c_lld.h
+ ├── i2s_lld.c
+ ├── i2s_lld.h
+ ├── icu_lld.c
+ ├── icu_lld.h
+ ├── mac_lld.c
+ ├── mac_lld.h
+ ├── mcuconf.h
+ ├── osal
+ │ ├── osal.c
+ │ ├── osal.h
+ │ └── osal.mk
+ ├── pal_lld.c
+ ├── pal_lld.h
+ ├── platform.mk
+ ├── pwm_lld.c
+ ├── pwm_lld.h
+ ├── rtc_lld.c
+ ├── rtc_lld.h
+ ├── sdc_lld.c
+ ├── sdc_lld.h
+ ├── serial_lld.c
+ ├── serial_lld.h
+ ├── spi_lld.c
+ ├── spi_lld.h
+ ├── st_lld.c
+ ├── st_lld.h
+ ├── uart_lld.c
+ ├── uart_lld.h
+ ├── usb_lld.c
+ └── usb_lld.h
A keyboards/infinity_ergodox/Makefile => keyboards/infinity_ergodox/Makefile +72 -0
@@ 0,0 1,72 @@
+# project specific files
+SRC = matrix.c \
+ led.c
+
+## chip/board settings
+# - the next two should match the directories in
+# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+# KL2x (LC) or K20x (3.0,3.1,3.2).
+# - For Infinity KB, SERIES = K20x
+MCU_FAMILY = KINETIS
+MCU_SERIES = K20x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+# or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+# - MKL26Z64 for Teensy LC
+# - MK20DX128 for Teensy 3.0
+# - MK20DX256 for Teensy 3.1 and 3.2
+# - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader
+# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
+MCU_LDSCRIPT = MK20DX256BLDR8
+
+# Startup code to use
+# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+# - kl2x for Teensy LC
+# - k20x5 for Teensy 3.0 and Infinity 60%
+# - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox
+MCU_STARTUP = k20x7
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+# or <this_dir>/boards
+# - BOARD =
+# - PJRC_TEENSY_LC for Teensy LC
+# - PJRC_TEENSY_3 for Teensy 3.0
+# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+# - MCHCK_K20 for Infinity KB
+#BOARD = MCHCK_K20
+BOARD = PJRC_TEENSY_3_1
+
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 7
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+OPT_DEFS = -DCORTEX_VTOR_INIT=0x00002000
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE ?= yes # Mouse keys
+EXTRAKEY_ENABLE ?= yes # Audio control and System control
+CONSOLE_ENABLE ?= yes # Console for debug
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes # USB Nkey Rollover
+CUSTOM_MATRIX ?= yes # Custom matrix file
+
+ifndef QUANTUM_DIR
+ include ../../Makefile
+endif<
\ No newline at end of file
A keyboards/infinity_ergodox/bootloader_defs.h => keyboards/infinity_ergodox/bootloader_defs.h +1 -0
@@ 0,0 1,1 @@
+#define KIIBOHD_BOOTLOADER
A keyboards/infinity_ergodox/chconf.h => keyboards/infinity_ergodox/chconf.h +524 -0
@@ 0,0 1,524 @@
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 100000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 20
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM FALSE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS FALSE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS FALSE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ * activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE FALSE
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS FALSE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note It is inserted into lock zone.
+ * @note It is also invoked when the threads simply return in order to
+ * terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* _CHCONF_H_ */
+
+/** @} */
A keyboards/infinity_ergodox/config.h => keyboards/infinity_ergodox/config.h +80 -0
@@ 0,0 1,80 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6464
+#define DEVICE_VER 0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/* at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER "TMK"
+#define USBSTR_MANUFACTURER 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00'
+#define PRODUCT "Infinity keyboard/TMK"
+#define USBSTR_PRODUCT 'I', '\x00', 'n', '\x00', 'f', '\x00', 'i', '\x00', 'n', '\x00', 'i', '\x00', 't', '\x00', 'y', '\x00', ' ', '\x00', 'k', '\x00', 'e', '\x00', 'y', '\x00', 'b', '\x00', 'o', '\x00', 'a', '\x00', 'r', '\x00', 'd', '\x00', '/', '\x00', 'T', '\x00', 'M', '\x00', 'K', '\x00'
+
+/* key matrix size */
+#define MATRIX_ROWS 18
+#define MATRIX_COLS 5
+#define LOCAL_MATRIX_ROWS 9
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Keymap for Infiity prototype */
+#define INFINITY_PROTOTYPE
+
+#define SERIAL_LINK_BAUD 562500
+#define SERIAL_LINK_THREAD_PRIORITY (NORMALPRIO - 1)
+// The visualizer needs gfx thread priorities
+#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2)
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
A keyboards/infinity_ergodox/halconf.h => keyboards/infinity_ergodox/halconf.h +353 -0
@@ 0,0 1,353 @@
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C TRUE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL TRUE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB TRUE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI TRUE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB TRUE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 128
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 256
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
A keyboards/infinity_ergodox/infinity_ergodox.c => keyboards/infinity_ergodox/infinity_ergodox.c +1 -0
@@ 0,0 1,1 @@
+#include "infinity_ergodox.h"
A keyboards/infinity_ergodox/infinity_ergodox.h => keyboards/infinity_ergodox/infinity_ergodox.h +44 -0
@@ 0,0 1,44 @@
+#ifndef KEYBOARDS_INFINITY_ERGODOX_INFINITY_ERGODOX_H_
+#define KEYBOARDS_INFINITY_ERGODOX_INFINITY_ERGODOX_H_
+
+#include "quantum.h"
+
+#define KEYMAP( \
+ A80, A70, A60, A50, A40, A30, A20, \
+ A81, A71, A61, A51, A41, A31, A21, \
+ A82, A72, A62, A52, A42, A32, \
+ A83, A73, A63, A53, A43, A33, A23, \
+ A84, A74, A64, A54, A44, \
+ A13, A03, \
+ A04, \
+ A34, A24, A14, \
+ B20, B30, B40, B50, B60, B70, B80, \
+ B21, B31, B41, B51, B61, B71, B81, \
+ B32, B42, B52, B62, B72, B82, \
+ B23, B33, B43, B53, B63, B73, B83, \
+ B44, B54, B64, B74, B84, \
+ B03, B13, \
+ B04, \
+ B14, B24, B34 \
+) { \
+ { KC_NO, KC_NO, KC_NO, KC_##A03, KC_##A04 }, \
+ { KC_NO, KC_NO, KC_NO, KC_##A13, KC_##A14 }, \
+ { KC_##A20, KC_##A21, KC_NO, KC_##A23, KC_##A24 }, \
+ { KC_##A30, KC_##A31, KC_##A32, KC_##A33, KC_##A34 }, \
+ { KC_##A40, KC_##A41, KC_##A42, KC_##A43, KC_##A44 }, \
+ { KC_##A50, KC_##A51, KC_##A52, KC_##A53, KC_##A54 }, \
+ { KC_##A60, KC_##A61, KC_##A62, KC_##A63, KC_##A64 }, \
+ { KC_##A70, KC_##A71, KC_##A72, KC_##A73, KC_##A74 }, \
+ { KC_##A80, KC_##A81, KC_##A82, KC_##A83, KC_##A84 }, \
+ { KC_NO, KC_NO, KC_NO, KC_##B03, KC_##B04 }, \
+ { KC_NO, KC_NO, KC_NO, KC_##B13, KC_##B14 }, \
+ { KC_##B20, KC_##B21, KC_NO, KC_##B23, KC_##B24 }, \
+ { KC_##B30, KC_##B31, KC_##B32, KC_##B33, KC_##B34 }, \
+ { KC_##B40, KC_##B41, KC_##B42, KC_##B43, KC_##B44 }, \
+ { KC_##B50, KC_##B51, KC_##B52, KC_##B53, KC_##B54 }, \
+ { KC_##B60, KC_##B61, KC_##B62, KC_##B63, KC_##B64 }, \
+ { KC_##B70, KC_##B71, KC_##B72, KC_##B73, KC_##B74 }, \
+ { KC_##B80, KC_##B81, KC_##B82, KC_##B83, KC_##B84 } \
+}
+
+#endif /* KEYBOARDS_INFINITY_ERGODOX_INFINITY_ERGODOX_H_ */
A keyboards/infinity_ergodox/keymaps/default/keymap.c => keyboards/infinity_ergodox/keymaps/default/keymap.c +111 -0
@@ 0,0 1,111 @@
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "infinity_ergodox.h"
+
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ KEYMAP( // layer 0 : default
+ // left hand
+ EQL, 1, 2, 3, 4, 5, ESC,
+ BSLS,Q, W, E, R, T, FN1,
+ TAB, A, S, D, F, G,
+ LSFT,Z, X, C, V, B, FN0,
+ LGUI,GRV, BSLS,LEFT,RGHT,
+ LCTL,LALT,
+ HOME,
+ BSPC,DEL, END,
+ // right hand
+ FN2, 6, 7, 8, 9, 0, MINS,
+ LBRC,Y, U, I, O, P, RBRC,
+ H, J, K, L, SCLN,QUOT,
+ FN0, N, M, COMM,DOT, SLSH,RSFT,
+ LEFT,DOWN,UP, RGHT,RGUI,
+ RALT,RCTL,
+ PGUP,
+ PGDN,ENT, SPC
+ ),
+
+ KEYMAP( // layer 1 : function and symbol keys
+ // left hand
+ TRNS,F1, F2, F3, F4, F5, F11,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN3,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,
+ TRNS,
+ TRNS,TRNS,TRNS,
+ // right hand
+ F12, F6, F7, F8, F9, F10, TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,
+ TRNS,
+ TRNS,TRNS,TRNS
+ ),
+
+ KEYMAP( // layer 2 : keyboard functions
+ // left hand
+ BTLD,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, FN3,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,
+ TRNS,
+ TRNS,TRNS,TRNS,
+ // right hand
+ TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,
+ TRNS,
+ TRNS,TRNS,TRNS
+ ),
+
+ KEYMAP( // layer 3: numpad
+ // left hand
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,
+ TRNS,
+ TRNS,TRNS,TRNS,
+ // right hand
+ TRNS,NLCK,PSLS,PAST,PAST,PMNS,BSPC,
+ TRNS,NO, P7, P8, P9, PMNS,BSPC,
+ NO, P4, P5, P6, PPLS,PENT,
+ TRNS,NO, P1, P2, P3, PPLS,PENT,
+ P0, PDOT,SLSH,PENT,PENT,
+ TRNS,TRNS,
+ TRNS,
+ TRNS,TRNS,TRNS
+ ),
+};
+const uint16_t fn_actions[] = {
+ ACTION_LAYER_MOMENTARY(1), // FN0 - switch to Layer1
+ ACTION_LAYER_SET(2, ON_PRESS), // FN1 - set Layer2
+ ACTION_LAYER_TOGGLE(3), // FN2 - toggle Layer3 aka Numpad layer
+ ACTION_LAYER_SET(0, ON_PRESS), // FN3 - set Layer0
+};
A keyboards/infinity_ergodox/led.c => keyboards/infinity_ergodox/led.c +49 -0
@@ 0,0 1,49 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "hal.h"
+
+#include "led.h"
+
+
+void led_set(uint8_t usb_led) {
+// The LCD backlight functionality conflicts with this simple
+// red backlight
+#if !defined(LCD_BACKLIGHT_ENABLE) && defined(STATUS_LED_ENABLE)
+ // PTC1: LCD Backlight Red(0:on/1:off)
+ GPIOC->PDDR |= (1<<1);
+ PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ GPIOC->PCOR |= (1<<1);
+ } else {
+ GPIOC->PSOR |= (1<<1);
+ }
+#elif !defined(LCD_BACKLIGHT_ENABLE)
+ (void)usb_led;
+ GPIOC->PDDR |= (1<<1);
+ PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
+ GPIOC->PSOR |= (1<<1);
+ GPIOC->PDDR |= (1<<2);
+ PORTC->PCR[2] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
+ GPIOC->PSOR |= (1<<2);
+ GPIOC->PDDR |= (1<<3);
+ PORTC->PCR[3] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1);
+ GPIOC->PSOR |= (1<<3);
+#else
+ (void)usb_led;
+#endif
+}
A keyboards/infinity_ergodox/matrix.c => keyboards/infinity_ergodox/matrix.c +169 -0
@@ 0,0 1,169 @@
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include "hal.h"
+#include "timer.h"
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "matrix.h"
+
+
+/*
+ * Infinity ErgoDox Pinusage:
+ * Column pins are input with internal pull-down. Row pins are output and strobe with high.
+ * Key is high or 1 when it turns on.
+ *
+ * col: { PTD1, PTD4, PTD5, PTD6, PTD7 }
+ * row: { PTB2, PTB3, PTB18, PTB19, PTC0, PTC9, PTC10, PTC11, PTD0 }
+ */
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[LOCAL_MATRIX_ROWS];
+static bool debouncing = false;
+static uint16_t debouncing_time = 0;
+
+
+void matrix_init(void)
+{
+ /* Column(sense) */
+ palSetPadMode(GPIOD, 1, PAL_MODE_INPUT_PULLDOWN);
+ palSetPadMode(GPIOD, 4, PAL_MODE_INPUT_PULLDOWN);
+ palSetPadMode(GPIOD, 5, PAL_MODE_INPUT_PULLDOWN);
+ palSetPadMode(GPIOD, 6, PAL_MODE_INPUT_PULLDOWN);
+ palSetPadMode(GPIOD, 7, PAL_MODE_INPUT_PULLDOWN);
+
+ /* Row(strobe) */
+ palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOB, 3, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOB, 18, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOB, 19, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOC, 0, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOC, 9, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOC, 10, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOC, 11, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOD, 0, PAL_MODE_OUTPUT_PUSHPULL);
+
+ memset(matrix, 0, MATRIX_ROWS);
+ memset(matrix_debouncing, 0, LOCAL_MATRIX_ROWS);
+}
+
+uint8_t matrix_scan(void)
+{
+ for (int row = 0; row < LOCAL_MATRIX_ROWS; row++) {
+ matrix_row_t data = 0;
+
+ // strobe row
+ switch (row) {
+ case 0: palSetPad(GPIOB, 2); break;
+ case 1: palSetPad(GPIOB, 3); break;
+ case 2: palSetPad(GPIOB, 18); break;
+ case 3: palSetPad(GPIOB, 19); break;
+ case 4: palSetPad(GPIOC, 0); break;
+ case 5: palSetPad(GPIOC, 9); break;
+ case 6: palSetPad(GPIOC, 10); break;
+ case 7: palSetPad(GPIOC, 11); break;
+ case 8: palSetPad(GPIOD, 0); break;
+ }
+
+ // need wait to settle pin state
+ // if you wait too short, or have a too high update rate
+ // the keyboard might freeze, or there might not be enough
+ // processing power to update the LCD screen properly.
+ // 20us, or two ticks at 100000Hz seems to be OK
+ wait_us(20);
+
+ // read col data: { PTD1, PTD4, PTD5, PTD6, PTD7 }
+ data = ((palReadPort(GPIOD) & 0xF0) >> 3) |
+ ((palReadPort(GPIOD) & 0x02) >> 1);
+
+ // un-strobe row
+ switch (row) {
+ case 0: palClearPad(GPIOB, 2); break;
+ case 1: palClearPad(GPIOB, 3); break;
+ case 2: palClearPad(GPIOB, 18); break;
+ case 3: palClearPad(GPIOB, 19); break;
+ case 4: palClearPad(GPIOC, 0); break;
+ case 5: palClearPad(GPIOC, 9); break;
+ case 6: palClearPad(GPIOC, 10); break;
+ case 7: palClearPad(GPIOC, 11); break;
+ case 8: palClearPad(GPIOD, 0); break;
+ }
+
+ if (matrix_debouncing[row] != data) {
+ matrix_debouncing[row] = data;
+ debouncing = true;
+ debouncing_time = timer_read();
+ }
+ }
+
+ uint8_t offset = 0;
+#ifdef MASTER_IS_ON_RIGHT
+ if (is_serial_link_master()) {
+ offset = MATRIX_ROWS - LOCAL_MATRIX_ROWS;
+ }
+#endif
+
+ if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
+ for (int row = 0; row < LOCAL_MATRIX_ROWS; row++) {
+ matrix[offset + row] = matrix_debouncing[row];
+ }
+ debouncing = false;
+ }
+ return 1;
+}
+
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & (1<<col));
+}
+
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ xprintf("\nr/c 01234567\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ xprintf("%X0: ", row);
+ matrix_row_t data = matrix_get_row(row);
+ for (int col = 0; col < MATRIX_COLS; col++) {
+ if (data & (1<<col))
+ xprintf("1");
+ else
+ xprintf("0");
+ }
+ xprintf("\n");
+ }
+}
+
+void matrix_set_remote(matrix_row_t* rows, uint8_t index) {
+ uint8_t offset = 0;
+#ifdef MASTER_IS_ON_RIGHT
+ offset = MATRIX_ROWS - LOCAL_MATRIX_ROWS * (index + 2);
+#else
+ offset = LOCAL_MATRIX_ROWS * (index + 1);
+#endif
+ for (int row = 0; row < LOCAL_MATRIX_ROWS; row++) {
+ matrix[offset + row] = rows[row];
+ }
+}
A keyboards/infinity_ergodox/mcuconf.h => keyboards/infinity_ergodox/mcuconf.h +74 -0
@@ 0,0 1,74 @@
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define K20x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+#define K20x7
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+#define KINETIS_NO_INIT FALSE
+
+/* PEE mode - 48MHz system clock driven by external crystal. */
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE
+#define KINETIS_PLLCLK_FREQUENCY 72000000UL
+#define KINETIS_SYSCLK_FREQUENCY 72000000UL
+#define KINETIS_BUSCLK_FREQUENCY 36000000UL
+#define KINETIS_FLASHCLK_FREQUENCY 24000000UL
+
+#if 0
+/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
+#define KINETIS_CLKDIV1_OUTDIV1 1
+#define KINETIS_CLKDIV1_OUTDIV2 1
+#define KINETIS_CLKDIV1_OUTDIV4 2
+#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY
+#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2
+#endif
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0 TRUE
+#define KINETIS_SERIAL_USE_UART1 TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0 TRUE
+/* Need to redefine this, since the default is for K20x */
+/* This is for Teensy LC; you should comment it out (or change to 5)
+ * for Teensy 3.x */
+#define KINETIS_USB_USB0_IRQ_PRIORITY 2
+
+/*
+ * SPI driver system settings.
+ */
+#define KINETIS_SPI_USE_SPI0 TRUE
+
+#define KINETIS_I2C_USE_I2C0 TRUE
+
+#endif /* _MCUCONF_H_ */
M tmk_core/avr.mk => tmk_core/avr.mk +1 -0
@@ 10,6 10,7 @@ AR = avr-ar rcs
NM = avr-nm
HEX = $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature
EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT)
+BIN =
M tmk_core/chibios.mk => tmk_core/chibios.mk +5 -1
@@ 113,6 113,7 @@ AR = arm-none-eabi-ar
NM = arm-none-eabi-nm
HEX = $(OBJCOPY) -O $(FORMAT)
EEP =
+BIN = $(OBJCOPY) -O binary
THUMBFLAGS = -DTHUMB_PRESENT -mno-thumb-interwork -DTHUMB_NO_INTERWORKING -mthumb -DTHUMB
@@ 151,4 152,7 @@ else ifneq ("$(wildcard $(KEYBOARD_PATH)/boards/$(BOARD)/bootloader_defs.h)","")
endif
# List any extra directories to look for libraries here.
-EXTRALIBDIRS = $(RULESPATH)/ld>
\ No newline at end of file
+EXTRALIBDIRS = $(RULESPATH)/ld
+
+dfu-util: $(BUILD_DIR)/$(TARGET).bin sizeafter
+ dfu-util -D $(BUILD_DIR)/$(TARGET).bin<
\ No newline at end of file
M tmk_core/rules.mk => tmk_core/rules.mk +6 -0
@@ 234,6 234,7 @@ MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
+MSG_BIN = Creating binary load file for Flash:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
@@ 369,6 370,11 @@ gccversion :
$(eval CMD=$(NM) -n $< > $@ )
@$(BUILD_CMD)
+%.bin: %.elf
+ @$(SILENT) || printf "$(MSG_BIN) $@" | $(AWK_CMD)
+ $(eval CMD=$(BIN) $< $@ || exit 0)
+ @$(BUILD_CMD)
+
# Create library from object files.
.SECONDARY : $(BUILD_DIR)/$(TARGET).a
.PRECIOUS : $(OBJ)