5 files changed, 55 insertions(+), 23 deletions(-)

M keyboards/do60/config.h
M keyboards/do60/do60.c
M keyboards/do60/do60.h
M keyboards/do60/keymaps/default/keymap.c
M keyboards/do60/keymaps/test/keymap.c

@@ 43,11 43,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
  *
 */
 #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3, B0 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, F4, B4, D7, D6, B3, B0 }
 #define UNUSED_PINS
 
 /* Backlight Setup */
-#define BACKLIGHT_PIN F4
+#define BACKLIGHT_PIN B5
 #define BACKLIGHT_LEVELS 6
 //#define BACKLIGHT_BREATHING
 

@@ 1,19 1,50 @@
 #include "do60.h"
+#include "led.h"
 
+//extern inline void do60_caps_led_on(void);
+//extern inline void do60_bl_led_on(void);
 
-extern inline void do60_caps_led_on(void);
-extern inline void do60_bl_led_on(void);
+//extern inline void do60_caps_led_off(void);
+//extern inline void do60_bl_led_off(void);
 
-extern inline void do60_caps_led_off(void);
-extern inline void do60_bl_led_off(void);
+extern inline void setdefaultrgb(void);
 
 
+void matrix_init_kb(void) {
+  // Keyboard start-up code goes here
+  // Runs once when the firmware starts up
+  matrix_init_user();
+  led_init_ports();
+  setdefaultrgb();
+};
+
+void matrix_scan_kb(void) {
+  // Looping keyboard code goes here
+  // This runs every cycle (a lot)
+  matrix_scan_user();
+};
+
+void led_init_ports(void) {
+  // Set caps lock LED pin as output
+  DDRB |= (1 << 2);
+  // Default to off
+  PORTB |= (1 << 2);
+}
+
 void led_set_kb(uint8_t usb_led) {
-	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-		do60_caps_led_on();
-	} else {
-		do60_caps_led_off();
-	}
+	//if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+	//	do60_caps_led_on();
+	//} else {
+	//	do60_caps_led_off();
+	//}
+
+	//led_set_user(usb_led);
 
-	led_set_user(usb_led);
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTB &= ~(1<<2);
+    } else {
+        // Turn capslock off
+        PORTB |= (1<<2);
+    }
 }

@@ 7,21 7,22 @@
 /* DO60 LEDs
  *   GPIO pads
  *   0 F7 not connected
- *   1 F6 RGB PWM Underglow
- *   2 F5 Backlight LED
- *   3 F4 not connected
+ *   1 F6 not connected
+ *   2 F5 RGB PWM Underglow
+ *   3 F4 Backlight LED
  *   B2 Capslock LED
  *   B0 not connected
  */
 
-
+/*
 inline void do60_caps_led_on(void)    { DDRB |=  (1<<2); PORTB &= ~(1<<2); }
 inline void do60_bl_led_on(void)    	{ DDRF |=  (1<<4); PORTF &= ~(1<<4); }
 
 inline void do60_caps_led_off(void)   { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
 inline void do60_bl_led_off(void)   	{ DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
+*/
 
-
+inline void setdefaultrgb(void){ rgblight_sethsv(100,100,100); }
 
 /* Do60 Keymap Definition Macro */
 #define LAYOUT_all( \

@@ 8,21 8,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_GRV,   KC_BSPC,   \
       KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC,           KC_BSLS,   \
       KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_NO,             KC_ENT,    \
-      KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_RSFT,  KC_NO,   KC_UP,    KC_SLSH,    \
+      KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_RSFT,  KC_SLSH,   KC_UP,    KC_SLSH,    \
       KC_LCTL, KC_LGUI, KC_LALT,                  KC_SPC, KC_NO,  KC_BSPC,                 KC_RGUI, F(0),     KC_LEFT, KC_DOWN,  KC_RIGHT),
 
   // 1: Function Layer
   [1] = LAYOUT_all(
       RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,    KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_NO,    KC_NO,     \
-      KC_NO,   RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD,  KC_HOME,KC_CALC,KC_NO,  KC_INS, KC_NO,   KC_PSCR, KC_SLCK,  KC_PAUS,          KC_DEL,    \
-      KC_NO,   RGB_HUD, RGB_SAD, RGB_VAD, RGB_SMOD, KC_END, KC_PGDN,KC_NO,  KC_NO,  KC_NO,   KC_HOME, KC_PGUP,  KC_NO,            KC_ENT,    \
+      KC_NO,   RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD,  BL_TOGG,BL_ON,  BL_INC, KC_INS, KC_NO,   KC_PSCR, KC_SLCK,  KC_PAUS,          KC_DEL,    \
+      KC_NO,   RGB_HUD, RGB_SAD, RGB_VAD, RGB_SMOD, BL_STEP,BL_OFF, BL_DEC, KC_NO,  KC_NO,   KC_HOME, KC_PGUP,  KC_NO,            KC_ENT,    \
       KC_LSFT, KC_NO,   KC_NO,   KC_APP,  BL_STEP,  KC_NO,  KC_NO,  KC_VOLD,KC_VOLU,KC_MUTE, KC_END,  KC_RSFT,  KC_NO  , KC_PGUP,  KC_INS,    \
       KC_LCTL, KC_LGUI, KC_LALT,                    KC_BSPC,KC_SPC, KC_DEL,                  KC_RGUI, F(0),     KC_HOME, KC_PGDOWN,KC_END),
 
 };
 
 // Custom Actions
- const uint16_t PROGMEM fn_actions[] = {
+const uint16_t PROGMEM fn_actions[] = {
      [0] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
  };
 


@@ 44,4 44,4 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
 // Loop
 void matrix_scan_user(void) {
   // Empty
-};
+};<
\ No newline at end of file

@@ 8,7 8,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_NO,    KC_BSPC,   \
       KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC,           KC_BSLS,   \
       KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_NO,             KC_ENT,    \
-      KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, KC_UP,    KC_UP,    \
+      KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, KC_UP,    KC_SLSH,    \
       KC_LCTL, KC_LGUI, KC_LALT,                  KC_BSPC,KC_SPC, KC_DEL,                  KC_RGUI, F(0),    KC_LEFT, KC_DOWN,  KC_RIGHT),
 
   // 1: Function Layer