A keyboards/1upkeyboards/pi60_hse/config.h => keyboards/1upkeyboards/pi60_hse/config.h +72 -0
@@ 0,0 1,72 @@
+// Copyright 2022 ziptyze (@ziptyze)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 10
+#define RGB_DI_PIN GP15
+#define DRIVER_LED_TOTAL 16
+#define RGBLED_NUM 16
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
+// RGB Matrix Animation modes. Explicitly enabled
+// For full list of effects, see:
+// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
+# define ENABLE_RGB_MATRIX_ALPHAS_MODS
+# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+# define ENABLE_RGB_MATRIX_BREATHING
+# define ENABLE_RGB_MATRIX_BAND_SAT
+# define ENABLE_RGB_MATRIX_BAND_VAL
+# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+# define ENABLE_RGB_MATRIX_CYCLE_ALL
+# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+# define ENABLE_RGB_MATRIX_DUAL_BEACON
+# define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+# define ENABLE_RGB_MATRIX_RAINDROPS
+# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+# define ENABLE_RGB_MATRIX_HUE_BREATHING
+# define ENABLE_RGB_MATRIX_HUE_PENDULUM
+# define ENABLE_RGB_MATRIX_HUE_WAVE
+# define ENABLE_RGB_MATRIX_PIXEL_RAIN
+# define ENABLE_RGB_MATRIX_PIXEL_FLOW
+# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
+# define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+# define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+# define ENABLE_RGB_MATRIX_SPLASH
+# define ENABLE_RGB_MATRIX_MULTISPLASH
+# define ENABLE_RGB_MATRIX_SOLID_SPLASH
+# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0<
\ No newline at end of file
A keyboards/1upkeyboards/pi60_hse/info.json => keyboards/1upkeyboards/pi60_hse/info.json +124 -0
@@ 0,0 1,124 @@
+{
+ "manufacturer": "1upkeyboards",
+ "keyboard_name": "pi60_hse",
+ "maintainer": "ziptyze",
+ "processor": "RP2040",
+ "bootloader": "rp2040",
+ "board": "GENERIC_RP_RP2040",
+ "usb": {
+ "device_version": "1.0.0",
+ "pid": "0x5603",
+ "vid": "0x6F75"
+ },
+ "debounce": 5,
+ "diode_direction": "COL2ROW",
+ "features": {
+ "audio": false,
+ "backlight": false,
+ "bootmagic": true,
+ "command": false,
+ "console": false,
+ "extrakey": true,
+ "mousekey": true,
+ "nkro": false,
+ "rgb_matrix": true,
+ "rgblight": false
+ },
+ "matrix_pins": {
+ "cols": ["GP9", "GP8", "GP6", "GP5", "GP14", "GP20", "GP13", "GP12", "GP11", "GP16", "GP17", "GP10", "GP19", "GP18"],
+ "rows": ["GP4", "GP3", "GP2", "GP1", "GP0", "GP21"]
+ },
+ "rgb_matrix": {
+ "driver": "WS2812",
+ "layout": [
+ { "flags": 2, "x": 98, "y": 51 },
+ { "flags": 2, "x": 68, "y": 51 },
+ { "flags": 2, "x": 41, "y": 51 },
+ { "flags": 2, "x": 12, "y": 51 },
+ { "flags": 2, "x": 12, "y": 13 },
+ { "flags": 2, "x": 41, "y": 13 },
+ { "flags": 2, "x": 69, "y": 13 },
+ { "flags": 2, "x": 98, "y": 13 },
+ { "flags": 2, "x": 126, "y": 13 },
+ { "flags": 2, "x": 155, "y": 13 },
+ { "flags": 2, "x": 183, "y": 13 },
+ { "flags": 2, "x": 212, "y": 13 },
+ { "flags": 2, "x": 208, "y": 51 },
+ { "flags": 2, "x": 183, "y": 51 },
+ { "flags": 2, "x": 157, "y": 51 },
+ { "flags": 2, "x": 126, "y": 51 }
+ ]
+ },
+ "community_layouts": [
+ "60_ansi_split_bs_rshift"
+ ],
+ "layouts": {
+ "LAYOUT_60_ansi_split_bs_rshift": {
+ "layout": [
+ { "label": "Esc", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 },
+ { "label": "1", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 },
+ { "label": "2", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 },
+ { "label": "3", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 },
+ { "label": "4", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 },
+ { "label": "5", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 },
+ { "label": "6", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 },
+ { "label": "7", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 },
+ { "label": "8", "matrix": [0, 8], "w": 1, "x": 8, "y": 0 },
+ { "label": "9", "matrix": [0, 9], "w": 1, "x": 9, "y": 0 },
+ { "label": "0", "matrix": [0, 10], "w": 1, "x": 10, "y": 0 },
+ { "label": "-", "matrix": [0, 11], "w": 1, "x": 11, "y": 0 },
+ { "label": "=", "matrix": [0, 12], "w": 1, "x": 12, "y": 0 },
+ { "label": "BS", "matrix": [0, 13], "w": 1, "x": 13, "y": 0 },
+ { "label": "~", "matrix": [1, 13], "w": 1, "x": 14, "y": 0 },
+ { "label": "Tab", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 },
+ { "label": "Q", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 },
+ { "label": "W", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 },
+ { "label": "E", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 },
+ { "label": "R", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 },
+ { "label": "T", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 },
+ { "label": "Y", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 },
+ { "label": "U", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 },
+ { "label": "I", "matrix": [1, 8], "w": 1, "x": 8.5, "y": 1 },
+ { "label": "O", "matrix": [1, 9], "w": 1, "x": 9.5, "y": 1 },
+ { "label": "P", "matrix": [1, 10], "w": 1, "x": 10.5, "y": 1 },
+ { "label": "[", "matrix": [1, 11], "w": 1, "x": 11.5, "y": 1 },
+ { "label": "]", "matrix": [1, 12], "w": 1, "x": 12.5, "y": 1 },
+ { "label": "|", "matrix": [2, 12], "w": 1.5, "x": 13.5, "y": 1 },
+ { "label": "Caps", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 },
+ { "label": "A", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 },
+ { "label": "S", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 },
+ { "label": "D", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 },
+ { "label": "F", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 },
+ { "label": "G", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 },
+ { "label": "H", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 },
+ { "label": "J", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 },
+ { "label": "K", "matrix": [2, 8], "w": 1, "x": 8.75, "y": 2 },
+ { "label": "L", "matrix": [2, 9], "w": 1, "x": 9.75, "y": 2 },
+ { "label": ";", "matrix": [2, 10], "w": 1, "x": 10.75, "y": 2 },
+ { "label": "'", "matrix": [2, 11], "w": 1, "x": 11.75, "y": 2 },
+ { "label": "Enter", "matrix": [2, 13], "w": 2.25, "x": 12.75, "y": 2 },
+ { "label": "LShift", "matrix": [3, 0], "w": 2.25, "x": 0, "y": 3 },
+ { "label": "Z", "matrix": [3, 1], "w": 1, "x": 2.25, "y": 3 },
+ { "label": "X", "matrix": [3, 2], "w": 1, "x": 3.25, "y": 3 },
+ { "label": "C", "matrix": [3, 3], "w": 1, "x": 4.25, "y": 3 },
+ { "label": "V", "matrix": [3, 4], "w": 1, "x": 5.25, "y": 3 },
+ { "label": "B", "matrix": [3, 5], "w": 1, "x": 6.25, "y": 3 },
+ { "label": "N", "matrix": [3, 6], "w": 1, "x": 7.25, "y": 3 },
+ { "label": "M", "matrix": [3, 7], "w": 1, "x": 8.25, "y": 3 },
+ { "label": ",", "matrix": [3, 8], "w": 1, "x": 9.25, "y": 3 },
+ { "label": ".", "matrix": [3, 9], "w": 1, "x": 10.25, "y": 3 },
+ { "label": "/", "matrix": [3, 10], "w": 1, "x": 11.25, "y": 3 },
+ { "label": "RShift", "matrix": [3, 12], "w": 1.75, "x": 12.25, "y": 3 },
+ { "label": "FN", "matrix": [3, 13], "w": 1, "x": 14, "y": 3 },
+ { "label": "LCtrl", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 },
+ { "label": "LGui", "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 },
+ { "label": "LAlt", "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 },
+ { "label": "Space", "matrix": [5, 5], "w": 6.25, "x": 3.75, "y": 4 },
+ { "label": "RAlt", "matrix": [5, 9], "w": 1.25, "x": 10, "y": 4 },
+ { "label": "RGui", "matrix": [5, 10], "w": 1.25, "x": 11.25, "y": 4 },
+ { "label": "Menu", "matrix": [5, 12], "w": 1.25, "x": 12.5, "y": 4 },
+ { "label": "RCtrl", "matrix": [5, 13], "w": 1.25, "x": 13.75, "y": 4 }
+ ]
+ }
+ }
+}<
\ No newline at end of file
A keyboards/1upkeyboards/pi60_hse/keymaps/default/keymap.c => keyboards/1upkeyboards/pi60_hse/keymaps/default/keymap.c +44 -0
@@ 0,0 1,44 @@
+/* Copyright 2022 ziptyze
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [0] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL
+ ),
+
+ [1] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
+ KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
+ KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS
+ ),
+
+ [2] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW,KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, RGB_M_SN,RGB_M_K, RGB_M_X, RGB_M_G, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ )
+};
A keyboards/1upkeyboards/pi60_hse/keymaps/via/keymap.c => keyboards/1upkeyboards/pi60_hse/keymaps/via/keymap.c +100 -0
@@ 0,0 1,100 @@
+/* Copyright 2022 ziptyze
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [0] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL
+ ),
+
+ [1] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
+ KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS,
+ KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS
+ ),
+
+ [2] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW,KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, RGB_M_SN,RGB_M_K, RGB_M_X, RGB_M_G, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+
+ [3] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+
+ [4] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+
+ [5] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+
+ [6] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+
+ [7] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+
+ [8] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+
+ [9] = LAYOUT_60_ansi_split_bs_rshift(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ )
+};
A keyboards/1upkeyboards/pi60_hse/keymaps/via/rules.mk => keyboards/1upkeyboards/pi60_hse/keymaps/via/rules.mk +2 -0
@@ 0,0 1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes
A keyboards/1upkeyboards/pi60_hse/readme.md => keyboards/1upkeyboards/pi60_hse/readme.md +23 -0
@@ 0,0 1,23 @@
+# pi60_hse
+
+The pi60 HSE is the update to the original 1up Keyboards 60% HSE. This keyboard features a multi layout hot swap PCB with options for split backspace, split right shift, and 6.25u and 7u space bottom rows. The controller is a Raspberry Pi rp2040 microcontroller.
+
+* Keyboard Maintainer: [ziptyze](https://github.com/ziptyze)
+* Hardware Availability: (https://1upkeyboards.com/shop/controllers/1upkeyboards-pi60hse-60-pcb/)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make 1upkeyboards/pi60_hse:default
+
+Flashing example for this keyboard:
+
+ make 1upkeyboards/pi60_hse:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 2 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Bootloader button**: Hold the button on the back of the PCB and plug in the keyboard
A keyboards/1upkeyboards/pi60_hse/rules.mk => keyboards/1upkeyboards/pi60_hse/rules.mk +1 -0
@@ 0,0 1,1 @@
+WS2812_DRIVER = vendor
D keyboards/1upkeyboards/sweet16/v2/promicro/config.h => keyboards/1upkeyboards/sweet16/v2/promicro/config.h +0 -26
@@ 1,26 0,0 @@
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { D4, D1, E6, B5 }
-#define MATRIX_COL_PINS { F7, F6, D2, D3 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
-/* Encoder pins */
-#define ENCODERS_PAD_A { F4 }
-#define ENCODERS_PAD_B { F5 }
-#define ENCODER_RESOLUTION 4
-
-/* Underglow options */
-#define RGB_DI_PIN F4
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 1
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
D keyboards/1upkeyboards/sweet16/v2/promicro/info.json => keyboards/1upkeyboards/sweet16/v2/promicro/info.json +0 -6
@@ 1,6 0,0 @@
-{
- "usb": {
- "pid": "0x0162",
- "device_version": "0.0.1"
- }
-}
D keyboards/1upkeyboards/sweet16/v2/promicro/promicro.c => keyboards/1upkeyboards/sweet16/v2/promicro/promicro.c +0 -8
@@ 1,8 0,0 @@
-#include "promicro.h"
-#include "encoder.h"
-
-#ifdef ENCODER_ENABLED
-bool encoder_update_kb(uint8_t index, bool clockwise) {
- return encoder_update_user(index, clockwise);
-}
-#endif
D keyboards/1upkeyboards/sweet16/v2/promicro/promicro.h => keyboards/1upkeyboards/sweet16/v2/promicro/promicro.h +0 -30
@@ 1,30 0,0 @@
-#pragma once
-
-#include "quantum.h"
-
-// Any changes to the layout names and/or definitions must also be made to info.json
-
-#define LAYOUT_ortho_4x4( \
- K00, K01, K02, K03, \
- K10, K11, K12, K13, \
- K20, K21, K22, K23, \
- K30, K31, K32, K33 \
-) { \
- { K00, K01, K02, K03 }, \
- { K10, K11, K12, K13 }, \
- { K20, K21, K22, K23 }, \
- { K30, K31, K32, K33 } \
-}
-
-#define LAYOUT_numpad_4x4( \
- K00, K01, K02, K03, \
- K10, K11, K12, \
- K20, K21, K22, K23, \
- K31, K32 \
-) { \
- { K00, K01, K02, K03 }, \
- { K10, K11, K12, KC_NO }, \
- { K20, K21, K22, K23 }, \
- { KC_NO, K31, K32, KC_NO } \
-}
-
D keyboards/1upkeyboards/sweet16/v2/promicro/readme.md => keyboards/1upkeyboards/sweet16/v2/promicro/readme.md +0 -13
@@ 1,13 0,0 @@
-# Sweet16 V2 (Pro Micro)
-
-A 4x4 numpad/macro pad sold by 1up Keyboards - designed by Clueboard
-
-* Keyboard Maintainer: skullydazed
-* Hardware Supported: Sweet16 V2 PCB, Pro Micro
-* Hardware Availability: [1up Keyboards](https://1upkeyboards.com/)
-
-Make example for this keyboard (after setting up your build environment):
-
- make 1upkeyboards/sweet16/v2/promicro:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
D keyboards/1upkeyboards/sweet16/v2/promicro/rules.mk => keyboards/1upkeyboards/sweet16/v2/promicro/rules.mk +0 -14
@@ 1,14 0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
-## Features
-CONSOLE_ENABLE = yes
-
-## On a Pro Micro you have to choose between underglow and the rotary encoder.
-RGBLIGHT_ENABLE = no
-ENCODER_ENABLE = yes
-
-LTO_ENABLE = yes
D keyboards/1upkeyboards/sweet16/v2/proton_c/config.h => keyboards/1upkeyboards/sweet16/v2/proton_c/config.h +0 -19
@@ 1,19 0,0 @@
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B5, B7, B2, B0 }
-#define MATRIX_COL_PINS { B8, A0, A10, A9 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
-/* Encoder pins */
-#define ENCODERS_PAD_A { A2 }
-#define ENCODERS_PAD_B { A1 }
-#define ENCODER_RESOLUTION 4
-
-#define AUDIO_PIN A5
-#define AUDIO_PIN_ALT A4
-#define AUDIO_PIN_ALT_AS_NEGATIVE
D keyboards/1upkeyboards/sweet16/v2/proton_c/info.json => keyboards/1upkeyboards/sweet16/v2/proton_c/info.json +0 -6
@@ 1,6 0,0 @@
-{
- "usb": {
- "pid": "0x0162",
- "device_version": "0.0.1"
- }
-}
D keyboards/1upkeyboards/sweet16/v2/proton_c/proton_c.c => keyboards/1upkeyboards/sweet16/v2/proton_c/proton_c.c +0 -1
@@ 1,1 0,0 @@
-#include "proton_c.h"
D keyboards/1upkeyboards/sweet16/v2/proton_c/proton_c.h => keyboards/1upkeyboards/sweet16/v2/proton_c/proton_c.h +0 -30
@@ 1,30 0,0 @@
-#pragma once
-
-#include "quantum.h"
-
-// Any changes to the layout names and/or definitions must also be made to info.json
-
-#define LAYOUT_ortho_4x4( \
- K00, K01, K02, K03, \
- K10, K11, K12, K13, \
- K20, K21, K22, K23, \
- K30, K31, K32, K33 \
-) { \
- { K00, K01, K02, K03 }, \
- { K10, K11, K12, K13 }, \
- { K20, K21, K22, K23 }, \
- { K30, K31, K32, K33 } \
-}
-
-#define LAYOUT_numpad_4x4( \
- K00, K01, K02, K03, \
- K10, K11, K12, \
- K20, K21, K22, K23, \
- K31, K32 \
-) { \
- { K00, K01, K02, K03 }, \
- { K10, K11, K12, KC_NO }, \
- { K20, K21, K22, K23 }, \
- { KC_NO, K31, K32, KC_NO } \
-}
-
D keyboards/1upkeyboards/sweet16/v2/proton_c/readme.md => keyboards/1upkeyboards/sweet16/v2/proton_c/readme.md +0 -13
@@ 1,13 0,0 @@
-# Sweet16 V2 (Proton C)
-
-A 4x4 numpad/macro pad sold by 1up Keyboards - designed by Clueboard
-
-* Keyboard Maintainer: skullydazed
-* Hardware Supported: Sweet16 V2 PCB, Proton C
-* Hardware Availability: [1up Keyboards](https://1upkeyboards.com/)
-
-Make example for this keyboard (after setting up your build environment):
-
- make 1upkeyboards/sweet16/v2/proton_c:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
D keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk => keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk +0 -11
@@ 1,11 0,0 @@
-# MCU name
-MCU = STM32F303
-BOARD = QMK_PROTON_C
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
-## Features
-CONSOLE_ENABLE = yes
-ENCODER_ENABLE = yes
-AUDIO_ENABLE = yes
A keyboards/1upkeyboards/sweet16v2/kb2040/config.h => keyboards/1upkeyboards/sweet16v2/kb2040/config.h +84 -0
@@ 0,0 1,84 @@
+/* Copyright 2022 ziptyze
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 10
+#define RGB_DI_PIN GP6
+#define DRIVER_LED_TOTAL 20
+#define RGBLED_NUM 20
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
+// RGB Matrix Animation modes. Explicitly enabled
+// For full list of effects, see:
+// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
+# define ENABLE_RGB_MATRIX_ALPHAS_MODS
+# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+# define ENABLE_RGB_MATRIX_BREATHING
+# define ENABLE_RGB_MATRIX_BAND_SAT
+# define ENABLE_RGB_MATRIX_BAND_VAL
+# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+# define ENABLE_RGB_MATRIX_CYCLE_ALL
+# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+# define ENABLE_RGB_MATRIX_DUAL_BEACON
+# define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+# define ENABLE_RGB_MATRIX_RAINDROPS
+# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+# define ENABLE_RGB_MATRIX_HUE_BREATHING
+# define ENABLE_RGB_MATRIX_HUE_PENDULUM
+# define ENABLE_RGB_MATRIX_HUE_WAVE
+# define ENABLE_RGB_MATRIX_PIXEL_RAIN
+# define ENABLE_RGB_MATRIX_PIXEL_FLOW
+# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
+# define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+# define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+# define ENABLE_RGB_MATRIX_SPLASH
+# define ENABLE_RGB_MATRIX_MULTISPLASH
+# define ENABLE_RGB_MATRIX_SOLID_SPLASH
+# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0
A keyboards/1upkeyboards/sweet16v2/kb2040/info.json => keyboards/1upkeyboards/sweet16v2/kb2040/info.json +95 -0
@@ 0,0 1,95 @@
+{
+ "manufacturer": "1upkeyboards",
+ "keyboard_name": "sweet16v2",
+ "url": "1upkeyboards.com/shop/keyboard-kits/macro-pads/sweet-16-v2-macropad-kit/",
+ "maintainer": "ziptyze",
+ "processor": "RP2040",
+ "bootloader": "rp2040",
+ "board": "GENERIC_RP_RP2040",
+ "usb": {
+ "device_version": "1.0.0",
+ "pid": "0x5518",
+ "vid": "0x6F75"
+ },
+ "features": {
+ "audio": false,
+ "backlight": false,
+ "bootmagic": true,
+ "command": false,
+ "console": false,
+ "encoder": true,
+ "extrakey": true,
+ "mousekey": true,
+ "nkro": false,
+ "rgb_matrix": true,
+ "rgblight": false
+ },
+ "matrix_pins": {
+ "cols": ["GP2", "GP9", "GP8", "GP7"],
+ "rows": ["GP26", "GP1", "GP18", "GP5"]
+ },
+ "diode_direction": "COL2ROW",
+ "encoder": {
+ "enabled": true,
+ "rotary": [
+ {
+ "pin_a": "GP27",
+ "pin_b": "GP28"
+ },
+ {
+ "pin_a": "GP4",
+ "pin_b": "GP3"
+ }
+ ]
+ },
+ "rgb_matrix": {
+ "driver": "WS2812",
+ "layout": [
+ { "flags": 4, "matrix": [0, 0], "x": 28, "y": 12 },
+ { "flags": 4, "matrix": [0, 1], "x": 84, "y": 12 },
+ { "flags": 4, "matrix": [0, 2], "x": 140, "y": 12 },
+ { "flags": 4, "matrix": [0, 3], "x": 196, "y": 12 },
+ { "flags": 2, "x": 196, "y": 17 },
+ { "flags": 4, "matrix": [1, 3], "x": 196, "y": 28 },
+ { "flags": 4, "matrix": [1, 2], "x": 140, "y": 28 },
+ { "flags": 4, "matrix": [1, 1], "x": 84, "y": 28 },
+ { "flags": 2, "x": 28, "y": 17 },
+ { "flags": 4, "matrix": [1, 0], "x": 28, "y": 28 },
+ { "flags": 4, "matrix": [2, 0], "x": 28, "y": 44 },
+ { "flags": 4, "matrix": [2, 1], "x": 84, "y": 44 },
+ { "flags": 4, "matrix": [2, 2], "x": 140, "y": 44 },
+ { "flags": 4, "matrix": [2, 3], "x": 196, "y": 44 },
+ { "flags": 2, "x": 196, "y": 47 },
+ { "flags": 4, "matrix": [3, 3], "x": 196, "y": 60 },
+ { "flags": 4, "matrix": [3, 2], "x": 140, "y": 60 },
+ { "flags": 4, "matrix": [3, 1], "x": 84, "y": 60 },
+ { "flags": 2, "x": 28, "y": 47 },
+ { "flags": 4, "matrix": [3, 0], "x": 28, "y": 60 }
+ ]
+ },
+ "community_layouts": [
+ "ortho_4x4"
+ ],
+ "layouts": {
+ "LAYOUT_ortho_4x4": {
+ "layout": [
+ { "matrix": [0, 0], "x": 0, "y": 0 },
+ { "matrix": [0, 1], "x": 1, "y": 0 },
+ { "matrix": [0, 2], "x": 2, "y": 0 },
+ { "matrix": [0, 3], "x": 3, "y": 0 },
+ { "matrix": [1, 0], "x": 0, "y": 1 },
+ { "matrix": [1, 1], "x": 1, "y": 1 },
+ { "matrix": [1, 2], "x": 2, "y": 1 },
+ { "matrix": [1, 3], "x": 3, "y": 1 },
+ { "matrix": [2, 0], "x": 0, "y": 2 },
+ { "matrix": [2, 1], "x": 1, "y": 2 },
+ { "matrix": [2, 2], "x": 2, "y": 2 },
+ { "matrix": [2, 3], "x": 3, "y": 2 },
+ { "matrix": [3, 0], "x": 0, "y": 3 },
+ { "matrix": [3, 1], "x": 1, "y": 3 },
+ { "matrix": [3, 2], "x": 2, "y": 3 },
+ { "matrix": [3, 3], "x": 3, "y": 3 }
+ ]
+ }
+ }
+}<
\ No newline at end of file
A keyboards/1upkeyboards/sweet16v2/kb2040/rules.mk => keyboards/1upkeyboards/sweet16v2/kb2040/rules.mk +1 -0
@@ 0,0 1,1 @@
+WS2812_DRIVER = vendor
A keyboards/1upkeyboards/sweet16v2/keymaps/default/keymap.c => keyboards/1upkeyboards/sweet16v2/keymaps/default/keymap.c +41 -0
@@ 0,0 1,41 @@
+/* Copyright 2022 ziptyze
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_ortho_4x4(
+ KC_P7, KC_P8, KC_P9, KC_PMNS,
+ KC_P4, KC_P5, KC_P6, KC_PPLS,
+ KC_P1, KC_P2, KC_P3, KC_PSLS,
+ MO(1), KC_P0, KC_PDOT, KC_PENT
+ ),
+
+ [1] = LAYOUT_ortho_4x4(
+ RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI,
+ RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD,
+ RGB_SPD, RGB_SPI, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, QK_BOOT
+ )
+};
+
+
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
+ [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(RGB_VAD, RGB_VAI) },
+ [1] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS), ENCODER_CCW_CW(KC_TRNS, KC_TRNS) }
+};
+#endif<
\ No newline at end of file
A keyboards/1upkeyboards/sweet16v2/keymaps/default/readme.md => keyboards/1upkeyboards/sweet16v2/keymaps/default/readme.md +1 -0
@@ 0,0 1,1 @@
+# The default keymap for Sweet 16 V2
A keyboards/1upkeyboards/sweet16v2/keymaps/via/keymap.c => keyboards/1upkeyboards/sweet16v2/keymaps/via/keymap.c +105 -0
@@ 0,0 1,105 @@
+/* Copyright 2022 ziptyze
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_ortho_4x4(
+ KC_P7, KC_P8, KC_P9, KC_PMNS,
+ KC_P4, KC_P5, KC_P6, KC_PPLS,
+ KC_P1, KC_P2, KC_P3, KC_PSLS,
+ MO(1), KC_P0, KC_PDOT, KC_PENT
+ ),
+
+ [1] = LAYOUT_ortho_4x4(
+ RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI,
+ RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD,
+ RGB_SPD, RGB_SPI, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, QK_BOOT
+ ),
+
+ [2] = LAYOUT_ortho_4x4(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+
+ [3] = LAYOUT_ortho_4x4(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+
+ [4] = LAYOUT_ortho_4x4(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+
+ [5] = LAYOUT_ortho_4x4(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+
+ [6] = LAYOUT_ortho_4x4(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+
+ [7] = LAYOUT_ortho_4x4(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+
+ [8] = LAYOUT_ortho_4x4(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+
+ [9] = LAYOUT_ortho_4x4(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+};
+
+
+#if defined(ENCODER_MAP_ENABLE)
+const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
+ [0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) },
+ [1] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS), ENCODER_CCW_CW(KC_TRNS, KC_TRNS) },
+ [2] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS), ENCODER_CCW_CW(KC_TRNS, KC_TRNS) },
+ [3] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS), ENCODER_CCW_CW(KC_TRNS, KC_TRNS) },
+ [4] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS), ENCODER_CCW_CW(KC_TRNS, KC_TRNS) },
+ [5] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS), ENCODER_CCW_CW(KC_TRNS, KC_TRNS) },
+ [6] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS), ENCODER_CCW_CW(KC_TRNS, KC_TRNS) },
+ [7] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS), ENCODER_CCW_CW(KC_TRNS, KC_TRNS) },
+ [8] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS), ENCODER_CCW_CW(KC_TRNS, KC_TRNS) },
+ [9] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS), ENCODER_CCW_CW(KC_TRNS, KC_TRNS) },
+};
+#endif<
\ No newline at end of file
A keyboards/1upkeyboards/sweet16v2/keymaps/via/readme.md => keyboards/1upkeyboards/sweet16v2/keymaps/via/readme.md +1 -0
@@ 0,0 1,1 @@
+# The default keymap for via on the Sweet 16 V2
A keyboards/1upkeyboards/sweet16v2/keymaps/via/rules.mk => keyboards/1upkeyboards/sweet16v2/keymaps/via/rules.mk +3 -0
@@ 0,0 1,3 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes
+ENCODER_MAP_ENABLE = yes
A keyboards/1upkeyboards/sweet16v2/pro_micro/config.h => keyboards/1upkeyboards/sweet16v2/pro_micro/config.h +84 -0
@@ 0,0 1,84 @@
+/* Copyright 2022 ziptyze
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 10
+
+#define RGB_DI_PIN D7
+#define DRIVER_LED_TOTAL 20
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
+// RGB Matrix Animation modes. Explicitly enabled
+// For full list of effects, see:
+// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
+# define ENABLE_RGB_MATRIX_ALPHAS_MODS
+# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+# define ENABLE_RGB_MATRIX_BREATHING
+# define ENABLE_RGB_MATRIX_BAND_SAT
+# define ENABLE_RGB_MATRIX_BAND_VAL
+# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+# define ENABLE_RGB_MATRIX_CYCLE_ALL
+# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+# define ENABLE_RGB_MATRIX_DUAL_BEACON
+# define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+# define ENABLE_RGB_MATRIX_RAINDROPS
+# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+# define ENABLE_RGB_MATRIX_HUE_BREATHING
+# define ENABLE_RGB_MATRIX_HUE_PENDULUM
+# define ENABLE_RGB_MATRIX_HUE_WAVE
+# define ENABLE_RGB_MATRIX_PIXEL_RAIN
+# define ENABLE_RGB_MATRIX_PIXEL_FLOW
+# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
+# define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+# define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+# define ENABLE_RGB_MATRIX_SPLASH
+# define ENABLE_RGB_MATRIX_MULTISPLASH
+# define ENABLE_RGB_MATRIX_SOLID_SPLASH
+# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0
A keyboards/1upkeyboards/sweet16v2/pro_micro/info.json => keyboards/1upkeyboards/sweet16v2/pro_micro/info.json +94 -0
@@ 0,0 1,94 @@
+{
+ "manufacturer": "1upkeyboards",
+ "keyboard_name": "sweet16v2",
+ "url": "1upkeyboards.com/shop/keyboard-kits/macro-pads/sweet-16-v2-macropad-kit/",
+ "maintainer": "ziptyze",
+ "bootloader": "atmel-dfu",
+ "processor": "atmega32u4",
+ "usb": {
+ "device_version": "1.0.0",
+ "pid": "0x5518",
+ "vid": "0x6F75"
+ },
+ "features": {
+ "audio": false,
+ "backlight": false,
+ "bootmagic": true,
+ "command": false,
+ "console": false,
+ "encoder": true,
+ "extrakey": true,
+ "mousekey": true,
+ "nkro": false,
+ "rgb_matrix": true,
+ "rgblight": false
+ },
+ "matrix_pins": {
+ "cols": ["F7", "D2", "B1", "C6"],
+ "rows": ["D1", "B5", "B4", "E6"]
+ },
+ "diode_direction": "COL2ROW",
+ "encoder": {
+ "enabled": true,
+ "rotary": [
+ {
+ "pin_a": "F6",
+ "pin_b": "F5"
+ },
+ {
+ "pin_a": "D4",
+ "pin_b": "D0"
+ }
+ ]
+ },
+ "rgb_matrix": {
+ "driver": "WS2812",
+ "layout": [
+ { "flags": 4, "matrix": [0, 0], "x": 28, "y": 12 },
+ { "flags": 4, "matrix": [0, 1], "x": 84, "y": 12 },
+ { "flags": 4, "matrix": [0, 2], "x": 140, "y": 12 },
+ { "flags": 4, "matrix": [0, 3], "x": 196, "y": 12 },
+ { "flags": 2, "x": 196, "y": 17 },
+ { "flags": 4, "matrix": [1, 3], "x": 196, "y": 28 },
+ { "flags": 4, "matrix": [1, 2], "x": 140, "y": 28 },
+ { "flags": 4, "matrix": [1, 1], "x": 84, "y": 28 },
+ { "flags": 2, "x": 28, "y": 17 },
+ { "flags": 4, "matrix": [1, 0], "x": 28, "y": 28 },
+ { "flags": 4, "matrix": [2, 0], "x": 28, "y": 44 },
+ { "flags": 4, "matrix": [2, 1], "x": 84, "y": 44 },
+ { "flags": 4, "matrix": [2, 2], "x": 140, "y": 44 },
+ { "flags": 4, "matrix": [2, 3], "x": 196, "y": 44 },
+ { "flags": 2, "x": 196, "y": 47 },
+ { "flags": 4, "matrix": [3, 3], "x": 196, "y": 60 },
+ { "flags": 4, "matrix": [3, 2], "x": 140, "y": 60 },
+ { "flags": 4, "matrix": [3, 1], "x": 84, "y": 60 },
+ { "flags": 2, "x": 28, "y": 47 },
+ { "flags": 4, "matrix": [3, 0], "x": 28, "y": 60 }
+ ]
+ },
+ "community_layouts": [
+ "ortho_4x4"
+ ],
+ "layouts": {
+ "LAYOUT_ortho_4x4": {
+ "layout": [
+ { "matrix": [0, 0], "x": 0, "y": 0 },
+ { "matrix": [0, 1], "x": 1, "y": 0 },
+ { "matrix": [0, 2], "x": 2, "y": 0 },
+ { "matrix": [0, 3], "x": 3, "y": 0 },
+ { "matrix": [1, 0], "x": 0, "y": 1 },
+ { "matrix": [1, 1], "x": 1, "y": 1 },
+ { "matrix": [1, 2], "x": 2, "y": 1 },
+ { "matrix": [1, 3], "x": 3, "y": 1 },
+ { "matrix": [2, 0], "x": 0, "y": 2 },
+ { "matrix": [2, 1], "x": 1, "y": 2 },
+ { "matrix": [2, 2], "x": 2, "y": 2 },
+ { "matrix": [2, 3], "x": 3, "y": 2 },
+ { "matrix": [3, 0], "x": 0, "y": 3 },
+ { "matrix": [3, 1], "x": 1, "y": 3 },
+ { "matrix": [3, 2], "x": 2, "y": 3 },
+ { "matrix": [3, 3], "x": 3, "y": 3 }
+ ]
+ }
+ }
+}<
\ No newline at end of file
A keyboards/1upkeyboards/sweet16v2/pro_micro/rules.mk => keyboards/1upkeyboards/sweet16v2/pro_micro/rules.mk +0 -0
A keyboards/1upkeyboards/sweet16v2/readme.md => keyboards/1upkeyboards/sweet16v2/readme.md +39 -0
@@ 0,0 1,39 @@
+# sweet16v2
+
+A 4x4 macropad with RGB inswitch lighting and underglow.
+
+* Keyboard Maintainer: [ziptyze](https://github.com/ziptyze)
+* Hardware Supported: 1upkeyboards Sweet 16 v2
+* Hardware Availability: [1upkeyboards](https://1upkeyboards.com/)
+
+Make example for this keyboard using an atmel-based controller (after setting up your build environment):
+
+ make 1upkeyboards/sweet16v2/promicro:default
+
+Flashing example for this keyboard using an atmel-based controller:
+
+ make 1upkeyboards/sweet16v2/promicro:default:flash
+
+Make example for this keyboard using an rp2040-based controller (after setting up your build environment):
+
+ make 1upkeyboards/sweet16v2/kb2040:default
+
+Flashing example for this keyboard using an rp2040-based controller:
+
+ make 1upkeyboards/sweet16v2/kb2040:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways for atmel-based controllers:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+
+
+Enter the bootloader in 2 ways for rp2040-based controllers:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Bootsel button**: Hold the bootsel button on controller and plug in the keyboard<
\ No newline at end of file