A keyboards/ky01/config.h => keyboards/ky01/config.h +146 -0
@@ 0,0 1,146 @@
+/*
+Copyright 2020 KnoblesseOblige
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x4B4F /* "KO" */
+#define PRODUCT_ID 0x4B59 /* "KY" */
+#define DEVICE_VER 0x0001
+#define MANUFACTURER KnoblesseOblige
+#define PRODUCT KY-01
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { E6, B5, B4, D7, D4, D6 }
+#define MATRIX_COL_PINS { B3, B7, D0, D1, D2, D3, D5, F0, F1, F4, F5, F6, F7, C7, C6, B6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+// #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+// #define RGBLIGHT_EFFECT_BREATHING
+// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+// #define RGBLIGHT_EFFECT_SNAKE
+// #define RGBLIGHT_EFFECT_KNIGHT
+// #define RGBLIGHT_EFFECT_CHRISTMAS
+// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+// #define RGBLIGHT_EFFECT_RGB_TEST
+// #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+// /*==== use exp() and sin() ====*/
+// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
A keyboards/ky01/info.json => keyboards/ky01/info.json +437 -0
@@ 0,0 1,437 @@
+{
+ "keyboard_name": "ky01",
+ "url": "https://geekhack.org/index.php?topic=107809.0",
+ "maintainer": "KnoblesseOblige",
+ "width": 16.25,
+ "height": 6.5,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {
+ "label": "Esc",
+ "x": 0,
+ "y": 0
+ },
+ {
+ "label": "F1",
+ "x": 2,
+ "y": 0
+ },
+ {
+ "label": "F2",
+ "x": 3,
+ "y": 0
+ },
+ {
+ "label": "F3",
+ "x": 4,
+ "y": 0
+ },
+ {
+ "label": "F4",
+ "x": 5,
+ "y": 0
+ },
+ {
+ "label": "F5",
+ "x": 6.5,
+ "y": 0
+ },
+ {
+ "label": "F6",
+ "x": 7.5,
+ "y": 0
+ },
+ {
+ "label": "F7",
+ "x": 8.5,
+ "y": 0
+ },
+ {
+ "label": "F8",
+ "x": 9.5,
+ "y": 0
+ },
+ {
+ "label": "F9",
+ "x": 11,
+ "y": 0
+ },
+ {
+ "label": "F10",
+ "x": 12,
+ "y": 0
+ },
+ {
+ "label": "F11",
+ "x": 13,
+ "y": 0
+ },
+ {
+ "label": "F12",
+ "x": 14,
+ "y": 0
+ },
+ {
+ "label": "PrtSc",
+ "x": 15.25,
+ "y": 0
+ },
+ {
+ "label": "\\u00ac",
+ "x": 0,
+ "y": 1.5
+ },
+ {
+ "label": "!",
+ "x": 1,
+ "y": 1.5
+ },
+ {
+ "label": "\"",
+ "x": 2,
+ "y": 1.5
+ },
+ {
+ "label": "\\u00a3",
+ "x": 3,
+ "y": 1.5
+ },
+ {
+ "label": "$",
+ "x": 4,
+ "y": 1.5
+ },
+ {
+ "label": "%",
+ "x": 5,
+ "y": 1.5
+ },
+ {
+ "label": "^",
+ "x": 6,
+ "y": 1.5
+ },
+ {
+ "label": "&",
+ "x": 7,
+ "y": 1.5
+ },
+ {
+ "label": "*",
+ "x": 8,
+ "y": 1.5
+ },
+ {
+ "label": "(",
+ "x": 9,
+ "y": 1.5
+ },
+ {
+ "label": ")",
+ "x": 10,
+ "y": 1.5
+ },
+ {
+ "label": "_",
+ "x": 11,
+ "y": 1.5
+ },
+ {
+ "label": "+",
+ "x": 12,
+ "y": 1.5
+ },
+ {
+ "label": "Backspace",
+ "x": 13,
+ "y": 1.5
+ },
+ {
+ "label": "Delete",
+ "x": 14,
+ "y": 1.5
+ },
+ {
+ "label": "Insert",
+ "x": 15.25,
+ "y": 1.5
+ },
+ {
+ "label": "Tab",
+ "x": 0,
+ "y": 2.5,
+ "w": 1.5
+ },
+ {
+ "label": "Q",
+ "x": 1.5,
+ "y": 2.5
+ },
+ {
+ "label": "W",
+ "x": 2.5,
+ "y": 2.5
+ },
+ {
+ "label": "E",
+ "x": 3.5,
+ "y": 2.5
+ },
+ {
+ "label": "R",
+ "x": 4.5,
+ "y": 2.5
+ },
+ {
+ "label": "T",
+ "x": 5.5,
+ "y": 2.5
+ },
+ {
+ "label": "Y",
+ "x": 6.5,
+ "y": 2.5
+ },
+ {
+ "label": "U",
+ "x": 7.5,
+ "y": 2.5
+ },
+ {
+ "label": "I",
+ "x": 8.5,
+ "y": 2.5
+ },
+ {
+ "label": "O",
+ "x": 9.5,
+ "y": 2.5
+ },
+ {
+ "label": "P",
+ "x": 10.5,
+ "y": 2.5
+ },
+ {
+ "label": "{",
+ "x": 11.5,
+ "y": 2.5
+ },
+ {
+ "label": "}",
+ "x": 12.5,
+ "y": 2.5
+ },
+ {
+ "label": "Enter",
+ "x": 13.75,
+ "y": 2.5,
+ "w": 1.25,
+ "h": 2
+ },
+ {
+ "label": "Delete",
+ "x": 15.25,
+ "y": 2.5
+ },
+ {
+ "label": "Caps Lock",
+ "x": 0,
+ "y": 3.5,
+ "w": 1.75
+ },
+ {
+ "label": "A",
+ "x": 1.75,
+ "y": 3.5
+ },
+ {
+ "label": "S",
+ "x": 2.75,
+ "y": 3.5
+ },
+ {
+ "label": "D",
+ "x": 3.75,
+ "y": 3.5
+ },
+ {
+ "label": "F",
+ "x": 4.75,
+ "y": 3.5
+ },
+ {
+ "label": "G",
+ "x": 5.75,
+ "y": 3.5
+ },
+ {
+ "label": "H",
+ "x": 6.75,
+ "y": 3.5
+ },
+ {
+ "label": "J",
+ "x": 7.75,
+ "y": 3.5
+ },
+ {
+ "label": "K",
+ "x": 8.75,
+ "y": 3.5
+ },
+ {
+ "label": "L",
+ "x": 9.75,
+ "y": 3.5
+ },
+ {
+ "label": ":",
+ "x": 10.75,
+ "y": 3.5
+ },
+ {
+ "label": "@",
+ "x": 11.75,
+ "y": 3.5
+ },
+ {
+ "label": "~",
+ "x": 12.75,
+ "y": 3.5
+ },
+ {
+ "label": "PgDn",
+ "x": 15.25,
+ "y": 3.5
+ },
+ {
+ "label": "Shift",
+ "x": 0,
+ "y": 4.5,
+ "w": 1.25
+ },
+ {
+ "label": "|",
+ "x": 1.25,
+ "y": 4.5
+ },
+ {
+ "label": "Z",
+ "x": 2.25,
+ "y": 4.5
+ },
+ {
+ "label": "X",
+ "x": 3.25,
+ "y": 4.5
+ },
+ {
+ "label": "C",
+ "x": 4.25,
+ "y": 4.5
+ },
+ {
+ "label": "V",
+ "x": 5.25,
+ "y": 4.5
+ },
+ {
+ "label": "B",
+ "x": 6.25,
+ "y": 4.5
+ },
+ {
+ "label": "N",
+ "x": 7.25,
+ "y": 4.5
+ },
+ {
+ "label": "M",
+ "x": 8.25,
+ "y": 4.5
+ },
+ {
+ "label": "<",
+ "x": 9.25,
+ "y": 4.5
+ },
+ {
+ "label": ">",
+ "x": 10.25,
+ "y": 4.5
+ },
+ {
+ "label": "?",
+ "x": 11.25,
+ "y": 4.5
+ },
+ {
+ "label": "Shift",
+ "x": 12.25,
+ "y": 4.5,
+ "w": 1.75
+ },
+ {
+ "label": "\\u2191",
+ "x": 14.25,
+ "y": 4.5
+ },
+ {
+ "label": "Ctrl",
+ "x": 0,
+ "y": 5.5,
+ "w": 1.25
+ },
+ {
+ "label": "Win",
+ "x": 1.25,
+ "y": 5.5,
+ "w": 1.25
+ },
+ {
+ "label": "Alt",
+ "x": 2.5,
+ "y": 5.5,
+ "w": 1.25
+ },
+ {
+ "x": 3.75,
+ "y": 5.5,
+ "w": 6.25
+ },
+ {
+ "label": "AltGr",
+ "x": 10,
+ "y": 5.5
+ },
+ {
+ "label": "Win",
+ "x": 11,
+ "y": 5.5
+ },
+ {
+ "label": "Ctrl",
+ "x": 12,
+ "y": 5.5
+ },
+ {
+ "label": "\\u2190",
+ "x": 13.25,
+ "y": 5.5
+ },
+ {
+ "label": "\\u2193",
+ "x": 14.25,
+ "y": 5.5
+ },
+ {
+ "label": "\\u2192",
+ "x": 15.25,
+ "y": 5.5
+ }
+ ]
+ }
+ }
+}
A keyboards/ky01/keymaps/default/keymap.c => keyboards/ky01/keymaps/default/keymap.c +41 -0
@@ 0,0 1,41 @@
+/* Copyright 2020 KnoblesseOblige
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+ QWERTY,
+ L1
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Base */
+ [QWERTY] = LAYOUT(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, LT(L1, KC_PSCR),
+ KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQUAL, KC_BSPC, KC_DELETE, KC_INS,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DELETE,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENTER, KC_PGDN,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT
+ ),
+ [L1] = LAYOUT(
+ RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+};
A keyboards/ky01/keymaps/via/keymap.c => keyboards/ky01/keymaps/via/keymap.c +60 -0
@@ 0,0 1,60 @@
+/* Copyright 2020 KnoblesseOblige
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+ QWERTY,
+ L1,
+ L2,
+ L3
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Base */
+ [QWERTY] = LAYOUT(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,
+ KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQUAL, KC_BSPC, KC_DELETE, KC_INS,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DELETE,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENTER, KC_PGDN,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT
+ ),
+ [L1] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ [L2] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+ [L3] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+};
A keyboards/ky01/keymaps/via/rules.mk => keyboards/ky01/keymaps/via/rules.mk +2 -0
@@ 0,0 1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes
A keyboards/ky01/ky01.c => keyboards/ky01/ky01.c +17 -0
@@ 0,0 1,17 @@
+/* Copyright 2020 KnoblesseOblige
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "ky01.h"
A keyboards/ky01/ky01.h => keyboards/ky01/ky01.h +38 -0
@@ 0,0 1,38 @@
+/* Copyright 2020 KnoblesseOblige
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+#define LAYOUT( \
+ k00, k02, k03, k04, k05, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2f, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3f, \
+ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, \
+ k50, k51, k52, k56, k59, k5a, k5b, k5c, k5d, k5e \
+) \
+{ \
+ { k00, XXX, k02, k03, k04, k05, XXX, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, XXX, k2f }, \
+ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, XXX, k3f }, \
+ { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, XXX, XXX }, \
+ { k50, k51, k52, XXX, XXX, XXX, k56, XXX, XXX, k59, k5a, k5b, k5c, k5d, k5e, XXX } \
+}
A keyboards/ky01/readme.md => keyboards/ky01/readme.md +22 -0
@@ 0,0 1,22 @@
+# ky01
+
+
+
+A 75% Top-Mount Keyboard By KCK.
+
+* Keyboard Maintainer: [KnoblesseOblige](https://github.com/KnoblesseOblige)
+* Hardware Supported: KY01
+* Hardware Availability: limited [Group Buy](https://geekhack.org/index.php?topic=107809.0) finished
+
+Make example for this keyboard (after setting up your build environment):
+
+ make ky01:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+# How to enter bootloader
+
+* hold left shift + right shift + B
+* OR hold escape + F13 (top right most key)
+* OR short the reset pins on the pcb, then plug the usb
+* OR (if you already flashed via) hold escape and then plug the usb
A keyboards/ky01/rules.mk => keyboards/ky01/rules.mk +22 -0
@@ 0,0 1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no # Enable Bluetooth
+AUDIO_ENABLE = no # Audio output