A keyboards/handwired/skakunm_dactyl/config.h => keyboards/handwired/skakunm_dactyl/config.h +60 -0
@@ 0,0 1,60 @@
+// Copyright 2022 Marko Skakun <skakun.marko@gmail.com>
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+
+#pragma once
+
+#include "config_common.h"
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 5
+
+// wiring of each half
+#define MATRIX_COL_PINS { C6, D7, E6, B4, B5 }
+#define MATRIX_ROW_PINS { B1, B3, B2, B6 }
+
+#define DIODE_DIRECTION COL2ROW
+
+/* mouse config */
+#define MOUSEKEY_INTERVAL 20
+#define MOUSEKEY_DELAY 0
+#define MOUSEKEY_TIME_TO_MAX 60
+#define MOUSEKEY_MAX_SPEED 7
+#define MOUSEKEY_WHEEL_DELAY 0
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* serial.c configuration for split keyboard */
+#define SOFT_SERIAL_PIN D0
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Enables This makes it easier for fast typists to use dual-function keys */
+#define PERMISSIVE_HOLD
+
+/* ws2812 RGB LED */
+//#define RGB_DI_PIN D3
+
+//#define RGBLED_NUM 12 // Number of LEDs
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
A keyboards/handwired/skakunm_dactyl/info.json => keyboards/handwired/skakunm_dactyl/info.json +57 -0
@@ 0,0 1,57 @@
+{
+ "keyboard_name": "Dactyl Min (3x5_5)",
+ "manufacturer": "skakunm",
+ "url": "",
+ "maintainer": "qmk",
+ "usb": {
+ "vid": "0xFEED",
+ "pid": "0x3060",
+ "device_version": "0.0.1"
+ },
+ "layouts": {
+ "LAYOUT_3x5_5": {
+ "layout": [
+ {"label":"L10", "x":0, "y":0},
+ {"label":"L11", "x":1, "y":0},
+ {"label":"L12", "x":2, "y":0},
+ {"label":"L13", "x":3, "y":0},
+ {"label":"L14", "x":4, "y":0},
+ {"label":"R13", "x":9, "y":0},
+ {"label":"R13", "x":10, "y":0},
+ {"label":"R12", "x":11, "y":0},
+ {"label":"R11", "x":12, "y":0},
+ {"label":"R10", "x":13, "y":0},
+ {"label":"L20", "x":0, "y":1},
+ {"label":"L21", "x":1, "y":1},
+ {"label":"L22", "x":2, "y":1},
+ {"label":"L23", "x":3, "y":1},
+ {"label":"L24", "x":4, "y":1},
+ {"label":"R23", "x":9, "y":1},
+ {"label":"R23", "x":10, "y":1},
+ {"label":"R22", "x":11, "y":1},
+ {"label":"R21", "x":12, "y":1},
+ {"label":"R20", "x":13, "y":1},
+ {"label":"L30", "x":0, "y":2},
+ {"label":"L31", "x":1, "y":2},
+ {"label":"L32", "x":2, "y":2},
+ {"label":"L33", "x":3, "y":2},
+ {"label":"L34", "x":4, "y":2},
+ {"label":"R33", "x":9, "y":2},
+ {"label":"R33", "x":10, "y":2},
+ {"label":"R32", "x":11, "y":2},
+ {"label":"R31", "x":12, "y":2},
+ {"label":"R30", "x":13, "y":2},
+ {"label":"L00", "x":4, "y":3},
+ {"label":"L01", "x":5, "y":3},
+ {"label":"R01", "x":8, "y":3},
+ {"label":"R00", "x":9, "y":3},
+ {"label":"L02", "x":4, "y":4},
+ {"label":"L03", "x":5, "y":4},
+ {"label":"L04", "x":6, "y":4},
+ {"label":"R04", "x":7, "y":4},
+ {"label":"R03", "x":8, "y":4},
+ {"label":"R02", "x":9, "y":4}
+ ]
+ }
+ }
+}
A keyboards/handwired/skakunm_dactyl/keymaps/default/keymap.c => keyboards/handwired/skakunm_dactyl/keymaps/default/keymap.c +41 -0
@@ 0,0 1,41 @@
+// Copyright 2022 Marko Skakun <skakun.marko@gmail.com>
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+enum custom_layers {
+ _LAYER0,
+ _LAYER1,
+ _LAYER2,
+};
+
+enum custom_keycodes {
+ LAYER0 = SAFE_RANGE,
+ LAYER1,
+ LAYER2,
+};
+
+ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [_LAYER0] = LAYOUT_3x5_5(
+ KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
+ KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT,
+ LSFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH),
+ KC_LCTL, KC_LALT, KC_RALT, KC_RCTL,
+ KC_BSPC, LT(2,KC_ESC), KC_DEL, KC_TAB, LT(1,KC_ENT), KC_SPC),
+
+[_LAYER1] = LAYOUT_3x5_5(
+ KC_BSLS, KC_HOME, KC_UP, KC_END, KC_LBRC, KC_RBRC, KC_P7, KC_P8, KC_P9, KC_LGUI,
+ KC_PSLS, KC_LEFT, KC_DOWN, KC_RGHT, KC_LPRN, KC_RPRN, KC_P4, KC_P5, KC_P6, KC_ENT,
+ KC_LSFT, KC_SCLN, KC_QUOT, KC_MINS, KC_EQL, KC_P0, KC_P1, KC_P2, KC_P3, KC_RSFT,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+[_LAYER2] = LAYOUT_3x5_5(
+ KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+ KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN,
+ KC_F1, KC_TILD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_QUOT, KC_QUES, KC_TRNS, KC_F12,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+};<
\ No newline at end of file
A keyboards/handwired/skakunm_dactyl/readme.md => keyboards/handwired/skakunm_dactyl/readme.md +15 -0
@@ 0,0 1,15 @@
+# skakunm dactyl
+
+
+
+This is a variation of Dactyl, main idea is to have 3x5 + 5 keys arrangement, 5 keys for thumb and a minimal set of keys for other fingers. Also having 20 keys enables easy wiring of 4 rows (1 for thumb and 3 for other fingers) and 5 columns (5 buttons for thumb and 5 columns for other fingers). Hardware form factor is somewhat similar to the Moonlander, but smaller. It is designed to be 3D printed using a SLA resin 3D printer.
+
+* Keyboard Maintainer: [Marko Skakun](https://github.com/skakunm)
+* Hardware Supported: Arduino Pro Micro
+* Hardware Availability: [Files to print](https://www.thingiverse.com/thing:5461125)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make handwired/skakunm_dactyl:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).<
\ No newline at end of file
A keyboards/handwired/skakunm_dactyl/rules.mk => keyboards/handwired/skakunm_dactyl/rules.mk +20 -0
@@ 0,0 1,20 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = no # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+AUDIO_ENABLE = no # Audio output
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
+
+SPLIT_KEYBOARD = yes
A keyboards/handwired/skakunm_dactyl/skakunm_dactyl.c => keyboards/handwired/skakunm_dactyl/skakunm_dactyl.c +4 -0
@@ 0,0 1,4 @@
+// Copyright 2022 Marko Skakun <skakun.marko@gmail.com>
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "skakunm_dactyl.h"<
\ No newline at end of file
A keyboards/handwired/skakunm_dactyl/skakunm_dactyl.h => keyboards/handwired/skakunm_dactyl/skakunm_dactyl.h +25 -0
@@ 0,0 1,25 @@
+// Copyright 2022 Marko Skakun <skakun.marko@gmail.com>
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_3x5_5(\
+ L10, L11, L12, L13, L14, R14, R13, R12, R11, R10, \
+ L20, L21, L22, L23, L24, R24, R23, R22, R21, R20, \
+ L30, L31, L32, L33, L34, R34, R33, R32, R31, R30, \
+ L00, L01, R01, R00, \
+ L04, L03, L02, R02, R03, R04 \
+ )\
+ {\
+ { L34, L33, L32, L31, L30 }, \
+ { L24, L23, L22, L21, L20 }, \
+ { L14, L13, L12, L11, L10 }, \
+ { L04, L03, L02, L01, L00 }, \
+\
+ { R34, R33, R32, R31, R30 }, \
+ { R24, R23, R22, R21, R20 }, \
+ { R14, R13, R12, R11, R10 }, \
+ { R04, R03, R02, R01, R00 }, \
+}