M keyboards/helix/rev2/config.h => keyboards/helix/rev2/config.h +2 -0
@@ 48,6 48,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define SSD1306OLED
#endif
+#define OLED_UPDATE_INTERVAL 50
+
/* Select rows configuration */
// Rows are 4 or 5
// #define HELIX_ROWS 5 see ./rules.mk
M keyboards/helix/rev2/keymaps/default/keymap.c => keyboards/helix/rev2/keymaps/default/keymap.c +27 -147
@@ 1,3 1,19 @@
+/* Copyright 2020 yushakobo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
#include QMK_KEYBOARD_H
#include "bootloader.h"
#ifdef PROTOCOL_LUFA
@@ 7,17 23,6 @@
#ifdef AUDIO_ENABLE
#include "audio.h"
#endif
-#ifdef SSD1306OLED
- #include "ssd1306.h"
-#endif
-
-
-#ifdef RGBLIGHT_ENABLE
-//Following line allows macro to read current RGB settings
-extern rgblight_config_t rgblight_config;
-#endif
-
-extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
@@ 420,16 425,16 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
rgblight_mode(RGB_current_mode);
rgblight_step();
- RGB_current_mode = rgblight_config.mode;
+ RGB_current_mode = rgblight_get_mode();
}
#endif
return false;
break;
case EISU:
if (record->event.pressed) {
- if(keymap_config.swap_lalt_lgui==false){
+ if (is_mac_mode()) {
register_code(KC_LANG2);
- }else{
+ } else {
SEND_STRING(SS_LALT("`"));
}
} else {
@@ 439,9 444,9 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
break;
case KANA:
if (record->event.pressed) {
- if(keymap_config.swap_lalt_lgui==false){
+ if (is_mac_mode()) {
register_code(KC_LANG1);
- }else{
+ } else {
SEND_STRING(SS_LALT("`"));
}
} else {
@@ 454,7 459,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
- RGB_current_mode = rgblight_config.mode;
+ RGB_current_mode = rgblight_get_mode();
}
#endif
break;
@@ 462,12 467,16 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
+#ifdef SSD1306OLED
+ #include "ssd1306.h"
+#endif
+
void matrix_init_user(void) {
#ifdef AUDIO_ENABLE
startup_user();
#endif
#ifdef RGBLIGHT_ENABLE
- RGB_current_mode = rgblight_config.mode;
+ RGB_current_mode = rgblight_get_mode();
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
@@ 500,132 509,3 @@ void music_scale_user(void)
}
#endif
-
-
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
-
-void matrix_scan_user(void) {
- iota_gfx_task(); // this is what updates the display continuously
-}
-
-void matrix_update(struct CharacterMatrix *dest,
- const struct CharacterMatrix *source) {
- if (memcmp(dest->display, source->display, sizeof(dest->display))) {
- memcpy(dest->display, source->display, sizeof(dest->display));
- dest->dirty = true;
- }
-}
-
-//assign the right code to your layers for OLED display
-#define L_BASE 0
-#define L_LOWER (1<<_LOWER)
-#define L_RAISE (1<<_RAISE)
-#define L_ADJUST (1<<_ADJUST)
-#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
-
-static void render_logo(struct CharacterMatrix *matrix) {
-
- static const char helix_logo[] PROGMEM ={
- 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
- 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
- 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
- 0};
- matrix_write_P(matrix, helix_logo);
- //matrix_write_P(&matrix, PSTR(" Split keyboard kit"));
-}
-
-static void render_rgbled_status(bool full, struct CharacterMatrix *matrix) {
-#ifdef RGBLIGHT_ENABLE
- char buf[30];
- if (RGBLIGHT_MODES > 1 && rgblight_config.enable) {
- if (full) {
- snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ",
- rgblight_config.mode,
- rgblight_config.hue/RGBLIGHT_HUE_STEP,
- rgblight_config.sat/RGBLIGHT_SAT_STEP,
- rgblight_config.val/RGBLIGHT_VAL_STEP);
- } else {
- snprintf(buf, sizeof(buf), "[%2d] ",rgblight_config.mode);
- }
- matrix_write(matrix, buf);
- }
-#endif
-}
-
-static void render_layer_status(struct CharacterMatrix *matrix) {
- // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
- char buf[10];
- matrix_write_P(matrix, PSTR("Layer: "));
- switch (layer_state) {
- case L_BASE:
- matrix_write_P(matrix, PSTR("Default"));
- break;
- case L_RAISE:
- matrix_write_P(matrix, PSTR("Raise"));
- break;
- case L_LOWER:
- matrix_write_P(matrix, PSTR("Lower"));
- break;
- case L_ADJUST:
- case L_ADJUST_TRI:
- matrix_write_P(matrix, PSTR("Adjust"));
- break;
- default:
- matrix_write_P(matrix, PSTR("Undef-"));
- snprintf(buf,sizeof(buf), "%ld", layer_state);
- matrix_write(matrix, buf);
- }
-}
-
-void render_status(struct CharacterMatrix *matrix) {
-
- // Render to mode icon
- static const char os_logo[][2][3] PROGMEM ={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
- if(keymap_config.swap_lalt_lgui==false){
- matrix_write_P(matrix, os_logo[0][0]);
- matrix_write_P(matrix, PSTR("\n"));
- matrix_write_P(matrix, os_logo[0][1]);
- }else{
- matrix_write_P(matrix, os_logo[1][0]);
- matrix_write_P(matrix, PSTR("\n"));
- matrix_write_P(matrix, os_logo[1][1]);
- }
-
- matrix_write_P(matrix, PSTR(" "));
- render_layer_status(matrix);
- matrix_write_P(matrix, PSTR("\n"));
-
- // Host Keyboard LED Status
- matrix_write_P(matrix, (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ?
- PSTR("NUMLOCK") : PSTR(" "));
- matrix_write_P(matrix, (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ?
- PSTR("CAPS") : PSTR(" "));
- matrix_write_P(matrix, (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ?
- PSTR("SCLK") : PSTR(" "));
- matrix_write_P(matrix, PSTR("\n"));
- render_rgbled_status(true, matrix);
-}
-
-
-void iota_gfx_task_user(void) {
- struct CharacterMatrix matrix;
-
-#if DEBUG_TO_SCREEN
- if (debug_enable) {
- return;
- }
-#endif
-
- matrix_clear(&matrix);
- if(is_master){
- render_status(&matrix);
- }else{
- render_logo(&matrix);
- render_rgbled_status(false, &matrix);
- render_layer_status(&matrix);
- }
- matrix_update(&display, &matrix);
-}
-
-#endif
A keyboards/helix/rev2/keymaps/default/oled_display.c => keyboards/helix/rev2/keymaps/default/oled_display.c +228 -0
@@ 0,0 1,228 @@
+/* Copyright 2020 yushakobo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include QMK_KEYBOARD_H
+
+#ifdef SSD1306OLED
+ #include "ssd1306.h"
+#endif
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layer_number {
+ _QWERTY = 0,
+ _COLEMAK,
+ _DVORAK,
+ _LOWER,
+ _RAISE,
+ _ADJUST
+};
+
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#if defined(SSD1306OLED) || defined(OLED_DRIVER_ENABLE)
+
+# if defined(OLED_DRIVER_ENABLE)
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+ if (is_keyboard_master()) {
+ return OLED_ROTATION_0;
+ } else {
+ return OLED_ROTATION_180;
+ }
+}
+# else
+# define oled_write(data,flag) matrix_write(matrix, data)
+# define oled_write_P(data,flag) matrix_write_P(matrix, data)
+# endif
+
+# ifdef SSD1306OLED
+void matrix_scan_user(void) {
+ iota_gfx_task(); // this is what updates the display continuously
+}
+
+void matrix_update(struct CharacterMatrix *dest,
+ const struct CharacterMatrix *source) {
+ if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+ memcpy(dest->display, source->display, sizeof(dest->display));
+ dest->dirty = true;
+ }
+}
+# endif
+
+//assign the right code to your layers for OLED display
+#define L_BASE 0
+#define L_LOWER (1<<_LOWER)
+#define L_RAISE (1<<_RAISE)
+#define L_ADJUST (1<<_ADJUST)
+#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
+
+# ifdef SSD1306OLED
+static void render_logo(struct CharacterMatrix *matrix) {
+# else
+static void render_logo(void) {
+# endif
+
+ static const char helix_logo[] PROGMEM ={
+ 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+ 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+ 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
+ 0};
+ oled_write_P(helix_logo, false);
+}
+
+# ifdef SSD1306OLED
+static void render_rgbled_status(bool full, struct CharacterMatrix *matrix) {
+# else
+static void render_rgbled_status(bool full) {
+# endif
+# ifdef RGBLIGHT_ENABLE
+ char buf[30];
+ if (RGBLIGHT_MODES > 1 && rgblight_is_enabled()) {
+ if (full) {
+ snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ",
+ rgblight_get_mode(),
+ rgblight_get_hue()/RGBLIGHT_HUE_STEP,
+ rgblight_get_sat()/RGBLIGHT_SAT_STEP,
+ rgblight_get_val()/RGBLIGHT_VAL_STEP);
+ } else {
+ snprintf(buf, sizeof(buf), "[%2d] ", rgblight_get_mode());
+ }
+ oled_write(buf, false);
+ }
+# endif
+}
+
+# ifdef SSD1306OLED
+static void render_layer_status(struct CharacterMatrix *matrix) {
+# else
+static void render_layer_status(void) {
+# endif
+ // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+ char buf[10];
+ oled_write_P(PSTR("Layer: "), false);
+ switch (layer_state) {
+ case L_BASE:
+ oled_write_P(PSTR("Default"), false);
+ break;
+ case L_RAISE:
+ oled_write_P(PSTR("Raise"), false);
+ break;
+ case L_LOWER:
+ oled_write_P(PSTR("Lower"), false);
+ break;
+ case L_ADJUST:
+ case L_ADJUST_TRI:
+ oled_write_P(PSTR("Adjust"), false);
+ break;
+ default:
+ oled_write_P(PSTR("Undef-"), false);
+ snprintf(buf,sizeof(buf), "%ld", layer_state);
+ oled_write(buf, false);
+ }
+}
+
+# ifdef SSD1306OLED
+void render_status(struct CharacterMatrix *matrix) {
+# else
+void render_status(void) {
+# endif
+ // Render to mode icon
+ static const char os_logo[][2][3] PROGMEM = {{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
+ if (is_mac_mode()) {
+ oled_write_P(os_logo[0][0], false);
+ oled_write_P(PSTR("\n"), false);
+ oled_write_P(os_logo[0][1], false);
+ } else {
+ oled_write_P(os_logo[1][0], false);
+ oled_write_P(PSTR("\n"), false);
+ oled_write_P(os_logo[1][1], false);
+ }
+
+ oled_write_P(PSTR(" "), false);
+# ifdef SSD1306OLED
+ render_layer_status(matrix);
+# else
+ render_layer_status();
+# endif
+ oled_write_P(PSTR("\n"), false);
+
+ // Host Keyboard LED Status
+ led_t led_state = host_keyboard_led_state();
+ oled_write_P(led_state.num_lock ? PSTR("NUMLOCK") : PSTR(" "), false);
+ oled_write_P(led_state.caps_lock ? PSTR("CAPS") : PSTR(" "), false);
+ oled_write_P(led_state.scroll_lock ? PSTR("SCLK") : PSTR(" "), false);
+ oled_write_P(PSTR("\n"), false);
+# ifdef SSD1306OLED
+ render_rgbled_status(true, matrix);
+# else
+ render_rgbled_status(true);
+ oled_write_P(PSTR("\n"), false);
+# endif
+}
+
+
+# ifdef SSD1306OLED
+# if OLED_UPDATE_INTERVAL > 0
+uint16_t oled_update_timeout;
+# endif
+
+void iota_gfx_task_user(void) {
+ struct CharacterMatrix matrix;
+
+# if DEBUG_TO_SCREEN
+ if (debug_enable) {
+ return;
+ }
+# endif
+
+#if OLED_UPDATE_INTERVAL > 0
+ if (timer_elapsed(oled_update_timeout) < OLED_UPDATE_INTERVAL) {
+ return;
+ }
+ oled_update_timeout = timer_read();
+#endif
+ matrix_clear(&matrix);
+ if (is_keyboard_master()) {
+ render_status(&matrix);
+ } else {
+ render_logo(&matrix);
+ render_rgbled_status(false, &matrix);
+ render_layer_status(&matrix);
+ }
+ matrix_update(&display, &matrix);
+}
+# else
+void oled_task_user(void) {
+
+# if DEBUG_TO_SCREEN
+ if (debug_enable) {
+ return;
+ }
+# endif
+
+ if (is_keyboard_master()) {
+ render_status();
+ } else {
+ render_logo();
+ render_rgbled_status(false);
+ render_layer_status();
+ }
+}
+# endif
+#endif
M keyboards/helix/rev2/keymaps/default/rules.mk => keyboards/helix/rev2/keymaps/default/rules.mk +12 -0
@@ 18,6 18,18 @@ LTO_ENABLE = no # if firmware size over limit, try this option
# LED_ANIMATIONS = yes # LED animations
# IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone)
+# OLED_ENABLE が yes のとき
+# OLED_SELECT が core ならば QMK 標準の oled_dirver.c を使用します。
+# OLED_SELECT が core 以外ならば従来どおり helix/local_drivers/ssd1306.c を使用します。
+# If OLED_ENABLE is 'yes'
+# If OLED_SELECT is 'core', use QMK standard oled_dirver.c.
+# If OLED_SELECT is other than 'core', use helix/local_drivers/ssd1306.c.
+OLED_SELECT = core
+
+ifeq ($(strip $(OLED_ENABLE)), yes)
+ SRC += oled_display.c
+endif
+
# convert Helix-specific options (that represent combinations of standard options)
# into QMK standard options.
include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))
A keyboards/helix/rev2/keymaps/led_test/oled_display.c => keyboards/helix/rev2/keymaps/led_test/oled_display.c +1 -0
@@ 0,0 1,1 @@
+#include "../default/oled_display.c"
M keyboards/helix/rev2/keymaps/led_test/rules.mk => keyboards/helix/rev2/keymaps/led_test/rules.mk +4 -0
@@ 18,6 18,10 @@ LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.)
LED_ANIMATIONS = yes # LED animations
# IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone)
+OLED_SELECT = core
+ifeq ($(strip $(OLED_ENABLE)), yes)
+ SRC += oled_display.c
+endif
SRC += led_test_init.c
# convert Helix-specific options (that represent combinations of standard options)
M keyboards/helix/rev2/local_features.mk => keyboards/helix/rev2/local_features.mk +89 -67
@@ 10,6 10,7 @@ KEYBOARD_LOCAL_FEATURES_MK :=
define HELIX_CUSTOMISE_MSG
$(info Helix Spacific Build Options)
$(info - OLED_ENABLE = $(OLED_ENABLE))
+ $(info - OLED_SELECT = $(OLED_SELECT))
$(info - LED_BACK_ENABLE = $(LED_BACK_ENABLE))
$(info - LED_UNDERGLOW_ENABLE = $(LED_UNDERGLOW_ENABLE))
$(info - LED_ANIMATIONS = $(LED_ANIMATIONS))
@@ 20,9 21,10 @@ endef
define HELIX_HELP_MSG
$(info Helix keyboard convenient command line option)
$(info - make HELIX=<options> helix:<keymap>)
- $(info - option= oled | no-oled | back | no-back | under | na | no-ani)
- $(info - ios | sc | split-common | scan | verbose)
- $(info - ex.)
+ $(info - option= oled | core-oled | local-oled | no-oled )
+ $(info - back | no-back | under | na | no-ani )
+ $(info - ios | sc | split-common | scan | verbose)
+ $(info - eg.)
$(info - make HELIX=no-oled helix:<keymap>)
$(info - make HELIX=oled,no-back helix:<keymap>)
$(info - make HELIX=oled,under helix:<keymap>)
@@ 32,65 34,76 @@ define HELIX_HELP_MSG
endef
ifneq ($(strip $(HELIX)),)
+ define HELIX_OPTION_PARSE
+ # parce 'oled' 'back' 'under' 'ios' etc.
+ $(if $(SHOW_PARCE),$(info parse .$1.)) #debug
+
+ ifeq ($(strip $1),help)
+ HELP=on
+ endif
+ ifneq ($(filter nooled no-oled,$(strip $1)),)
+ OLED_ENABLE = no
+ endif
+ ifeq ($(strip $1),oled)
+ OLED_ENABLE = yes
+ endif
+ ifneq ($(filter core-oled core_oled newoled new-oled olednew oled-new,$(strip $1)),)
+ OLED_ENABLE = yes
+ OLED_SELECT = core
+ endif
+ ifneq ($(filter local-oled local_oled oldoled old-oled oledold oled-old,$(strip $1)),)
+ OLED_ENABLE = yes
+ OLED_SELECT = local
+ endif
+ ifneq ($(filter noback no-back nounder no-under,$(strip $1)),)
+ LED_BACK_ENABLE = no
+ LED_UNDERGLOW_ENABLE = no
+ endif
+ ifeq ($(strip $1),back)
+ LED_BACK_ENABLE = yes
+ LED_UNDERGLOW_ENABLE = no
+ endif
+ ifeq ($(strip $1),under)
+ LED_BACK_ENABLE = no
+ LED_UNDERGLOW_ENABLE = yes
+ endif
+ ifneq ($(filter na no_ani no-ani,$(strip $1)),)
+ LED_ANIMATIONS = no
+ endif
+ ifeq ($(strip $1),ios)
+ IOS_DEVICE_ENABLE = yes
+ endif
+ ifneq ($(filter sc split-common split_common,$(strip $1)),)
+ SPLIT_KEYBOARD = yes
+ endif
+ ifneq ($(filter nosc no-sc no-split-common no-split_common,$(strip $1)),)
+ SPLIT_KEYBOARD = no
+ endif
+ ifeq ($(strip $1),scan)
+ # use DEBUG_MATRIX_SCAN_RATE
+ # see docs/newbs_testing_debugging.md
+ OPT_DEFS += -DDEBUG_MATRIX_SCAN_RATE
+ CONSOLE_ENABLE = yes
+ SHOW_VERBOSE_INFO = yes
+ endif
+ ifeq ($(strip $1),verbose)
+ SHOW_VERBOSE_INFO = yes
+ endif
+ ifeq ($(strip $1),lto)
+ LTO_ENABLE = yes
+ endif
+ ifneq ($(filter nolto no-lto no_lto,$(strip $1)),)
+ LTO_ENABLE = no
+ endif
+ endef # end of HELIX_OPTION_PARSE
+
COMMA=,
- helix_option := $(subst $(COMMA), , $(HELIX))
- ifneq ($(filter help,$(helix_option)),)
- $(eval $(call HELIX_HELP_MSG))
- $(error )
- endif
- ifneq ($(filter nooled,$(helix_option)),)
- OLED_ENABLE = no
- else ifneq ($(filter no-oled,$(helix_option)),)
- OLED_ENABLE = no
- else ifneq ($(filter oled,$(helix_option)),)
- OLED_ENABLE = yes
- endif
- ifneq ($(filter noback,$(helix_option)),)
- LED_BACK_ENABLE = no
- LED_UNDERGLOW_ENABLE = no
- else ifneq ($(filter no-back,$(helix_option)),)
- LED_BACK_ENABLE = no
- LED_UNDERGLOW_ENABLE = no
- else ifneq ($(filter nounder,$(helix_option)),)
- LED_BACK_ENABLE = no
- LED_UNDERGLOW_ENABLE = no
- else ifneq ($(filter no-under,$(helix_option)),)
- LED_BACK_ENABLE = no
- LED_UNDERGLOW_ENABLE = no
- else ifneq ($(filter back,$(helix_option)),)
- LED_BACK_ENABLE = yes
- LED_UNDERGLOW_ENABLE = no
- else ifneq ($(filter under,$(helix_option)),)
- LED_BACK_ENABLE = no
- LED_UNDERGLOW_ENABLE = yes
- endif
- ifneq ($(filter na,$(helix_option)),)
- LED_ANIMATIONS = no
- endif
- ifneq ($(filter no_ani,$(helix_option)),)
- LED_ANIMATIONS = no
- endif
- ifneq ($(filter no-ani,$(helix_option)),)
- LED_ANIMATIONS = no
- endif
- ifneq ($(filter ios,$(helix_option)),)
- IOS_DEVICE_ENABLE = yes
- endif
- ifneq ($(filter sc,$(helix_option)),)
- SPLIT_KEYBOARD = yes
- endif
- ifneq ($(filter split-common,$(helix_option)),)
- SPLIT_KEYBOARD = yes
- endif
- ifneq ($(filter scan,$(helix_option)),)
- # use DEBUG_MATRIX_SCAN_RATE
- # see docs/newbs_testing_debugging.md
- OPT_DEFS += -DDEBUG_MATRIX_SCAN_RATE
- CONSOLE_ENABLE = yes
- SHOW_VERBOSE_INFO = yes
- endif
- ifeq ($(filter verbose,$(helix_option)), verbose)
- SHOW_VERBOSE_INFO = yes
+ $(eval $(foreach A_OPTION_NAME,$(subst $(COMMA), ,$(HELIX)), \
+ $(call HELIX_OPTION_PARSE,$(A_OPTION_NAME))))
+
+ ifeq ($(strip $(HELP)),on)
+ $(eval $(call HELIX_HELP_MSG))
+ $(error )
endif
SHOW_HELIX_OPTIONS = yes
endif
@@ 142,12 155,21 @@ ifeq ($(strip $(LED_ANIMATIONS)), yes)
endif
ifeq ($(strip $(OLED_ENABLE)), yes)
- SRC += local_drivers/i2c.c
- SRC += local_drivers/ssd1306.c
- KEYBOARD_PATHS += $(HELIX_TOP_DIR)/local_drivers
- OPT_DEFS += -DOLED_ENABLE
- ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
- OPT_DEFS += -DLOCAL_GLCDFONT
+ ifeq ($(strip $(OLED_SELECT)),core)
+ OLED_DRIVER_ENABLE = yes
+ ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
+ OPT_DEFS += -DOLED_FONT_H=\<helixfont.h\>
+ else
+ OPT_DEFS += -DOLED_FONT_H=\"common/glcdfont.c\"
+ endif
+ else
+ SRC += local_drivers/i2c.c
+ SRC += local_drivers/ssd1306.c
+ KEYBOARD_PATHS += $(HELIX_TOP_DIR)/local_drivers
+ OPT_DEFS += -DOLED_ENABLE
+ ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
+ OPT_DEFS += -DLOCAL_GLCDFONT
+ endif
endif
endif
A keyboards/helix/rev2/readme.md => keyboards/helix/rev2/readme.md +13 -0
@@ 0,0 1,13 @@
+# Helix rev2
+
+A compact split ortholinear keyboard.
+
+* Keyboard Maintainer: [yushakobo](https://github.com/yushakobo)
+* Hardware Supported: Helix rev2 PCBs, Pro Micro
+* Hardware Availability: [PCB & Case Data](https://github.com/MakotoKurauchi/helix)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make helix/rev2:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
M keyboards/helix/rev2/rev2.c => keyboards/helix/rev2/rev2.c +16 -1
@@ 18,13 18,28 @@ void led_set_kb(uint8_t usb_led) {
}
#endif
+bool is_mac_mode(void) {
+ // This is the opposite of the QMK standard, but we'll leave it for backwards compatibility.
+ return keymap_config.swap_lalt_lgui == false;
+}
+
+void set_mac_mode_kb(bool macmode) {
+ /* The result is the same as pressing the AG_NORM(=MAGIC_UNSWAP_ALT_GUI)/AG_SWAP(=MAGIC_SWAP_ALT_GUI) keys.
+ * see
+ * https://github.com/qmk/qmk_firmware/blob/fb4a6ad30ea7a648acd59793ed4a30c3a8d8dc32/quantum/process_keycode/process_magic.c#L123-L124
+ * https://github.com/qmk/qmk_firmware/blob/fb4a6ad30ea7a648acd59793ed4a30c3a8d8dc32/quantum/process_keycode/process_magic.c#L80-L81
+ */
+ keymap_config.swap_lalt_lgui = keymap_config.swap_ralt_rgui = !macmode;
+ eeconfig_update_keymap(keymap_config.raw);
+}
+
void matrix_init_kb(void) {
// Each keymap.c should use is_keyboard_master() instead of is_master.
// But keep is_master for a while for backwards compatibility
// for the old keymap.c.
is_master = is_keyboard_master();
- matrix_init_user();
+ matrix_init_user();
};
void keyboard_post_init_kb(void) {
M keyboards/helix/rev2/rev2.h => keyboards/helix/rev2/rev2.h +3 -0
@@ 2,6 2,9 @@
#include "helix.h"
+bool is_mac_mode(void);
+void set_mac_mode_kb(bool macmode);
+
#ifndef SPLIT_KEYBOARD
extern bool is_helix_master(void);
#define is_keyboard_master() is_helix_master()
M keyboards/helix/rev2/rules.mk => keyboards/helix/rev2/rules.mk +5 -0
@@ 8,3 8,8 @@ LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.)
LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.)
LED_ANIMATIONS = yes # LED animations
IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone)
+
+# If OLED_ENABLE is 'yes'
+# If OLED_SELECT is 'core', use QMK standard oled_dirver.c.
+# If OLED_SELECT is other than 'core', use helix/local_drivers/ssd1306.c.
+OLED_SELECT = local
M keyboards/helix/rev3_4rows/rev3_4rows.c => keyboards/helix/rev3_4rows/rev3_4rows.c +7 -9
@@ 21,15 21,13 @@ bool is_mac_mode(void) {
}
void set_mac_mode(bool macmode) {
- if (macmode) {
- /* The result is the same as pressing the AG_NORM(=MAGIC_UNSWAP_ALT_GUI) key. */
- /* https://github.com/qmk/qmk_firmware/blob/fb4a6ad30ea7a648acd59793ed4a30c3a8d8dc32/quantum/process_keycode/process_magic.c#L123-L124 */
- keymap_config.swap_lalt_lgui = keymap_config.swap_ralt_rgui = false;
- } else {
- /* The result is the same as pressing the AG_SWAP(=MAGIC_SWAP_ALT_GUI) key. */
- /* https://github.com/qmk/qmk_firmware/blob/fb4a6ad30ea7a648acd59793ed4a30c3a8d8dc32/quantum/process_keycode/process_magic.c#L80-L81 */
- keymap_config.swap_lalt_lgui = keymap_config.swap_ralt_rgui = true;
- }
+ /* The result is the same as pressing the AG_NORM(=MAGIC_UNSWAP_ALT_GUI)/AG_SWAP(=MAGIC_SWAP_ALT_GUI) keys.
+ * see
+ * https://github.com/qmk/qmk_firmware/blob/fb4a6ad30ea7a648acd59793ed4a30c3a8d8dc32/quantum/process_keycode/process_magic.c#L123-L124
+ * https://github.com/qmk/qmk_firmware/blob/fb4a6ad30ea7a648acd59793ed4a30c3a8d8dc32/quantum/process_keycode/process_magic.c#L80-L81
+ */
+ keymap_config.swap_lalt_lgui = keymap_config.swap_ralt_rgui = !macmode;
+ eeconfig_update_keymap(keymap_config.raw);
}
void dip_switch_update_kb(uint8_t index, bool active) {
M keyboards/helix/rev3_5rows/rev3_5rows.c => keyboards/helix/rev3_5rows/rev3_5rows.c +7 -9
@@ 21,15 21,13 @@ bool is_mac_mode(void) {
}
void set_mac_mode(bool macmode) {
- if (macmode) {
- /* The result is the same as pressing the AG_NORM(=MAGIC_UNSWAP_ALT_GUI) key. */
- /* https://github.com/qmk/qmk_firmware/blob/fb4a6ad30ea7a648acd59793ed4a30c3a8d8dc32/quantum/process_keycode/process_magic.c#L123-L124 */
- keymap_config.swap_lalt_lgui = keymap_config.swap_ralt_rgui = false;
- } else {
- /* The result is the same as pressing the AG_SWAP(=MAGIC_SWAP_ALT_GUI) key. */
- /* https://github.com/qmk/qmk_firmware/blob/fb4a6ad30ea7a648acd59793ed4a30c3a8d8dc32/quantum/process_keycode/process_magic.c#L80-L81 */
- keymap_config.swap_lalt_lgui = keymap_config.swap_ralt_rgui = true;
- }
+ /* The result is the same as pressing the AG_NORM(=MAGIC_UNSWAP_ALT_GUI)/AG_SWAP(=MAGIC_SWAP_ALT_GUI) keys.
+ * see
+ * https://github.com/qmk/qmk_firmware/blob/fb4a6ad30ea7a648acd59793ed4a30c3a8d8dc32/quantum/process_keycode/process_magic.c#L123-L124
+ * https://github.com/qmk/qmk_firmware/blob/fb4a6ad30ea7a648acd59793ed4a30c3a8d8dc32/quantum/process_keycode/process_magic.c#L80-L81
+ */
+ keymap_config.swap_lalt_lgui = keymap_config.swap_ralt_rgui = !macmode;
+ eeconfig_update_keymap(keymap_config.raw);
}
void dip_switch_update_kb(uint8_t index, bool active) {