M keyboards/akko/5108/config.h => keyboards/akko/5108/config.h +0 -1
@@ 35,7 35,6 @@
#define SPI_MOSI_PAL_MODE 5
#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN C12
-#define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
/* I2C Config for LED Driver */
#define IS31FL3733_DRIVER_COUNT 2
M keyboards/akko/5108/info.json => keyboards/akko/5108/info.json +2 -1
@@ 29,7 29,8 @@
"eeprom": {
"driver": "wear_leveling",
"wear_leveling": {
- "driver": "spi_flash"
+ "driver": "spi_flash",
+ "backing_size": 8192
}
},
"indicators": {
M keyboards/akko/acr87/config.h => keyboards/akko/acr87/config.h +0 -1
@@ 32,7 32,6 @@
#define SPI_MOSI_PAL_MODE 5
#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN C12
-#define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
/* I2C Config for LED Driver */
#define IS31FL3733_DRIVER_COUNT 3
M keyboards/akko/acr87/info.json => keyboards/akko/acr87/info.json +2 -1
@@ 29,7 29,8 @@
"eeprom": {
"driver": "wear_leveling",
"wear_leveling": {
- "driver": "spi_flash"
+ "driver": "spi_flash",
+ "backing_size": 8192
}
},
"rgb_matrix": {
M keyboards/akko/top40/config.h => keyboards/akko/top40/config.h +0 -1
@@ 32,7 32,6 @@
#define SPI_MOSI_PAL_MODE 5
#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN C12
-#define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
/* I2C Config for LED Driver */
#define IS31FL3733_DRIVER_COUNT 2
M keyboards/akko/top40/info.json => keyboards/akko/top40/info.json +2 -1
@@ 29,7 29,8 @@
"eeprom": {
"driver": "wear_leveling",
"wear_leveling": {
- "driver": "spi_flash"
+ "driver": "spi_flash",
+ "backing_size": 8192
}
},
"rgb_matrix": {
M keyboards/annepro2/c15/config.h => keyboards/annepro2/c15/config.h +0 -4
@@ 57,7 57,3 @@
#define EXTERNAL_FLASH_SECTOR_SIZE 4096
#define EXTERNAL_FLASH_BLOCK_SIZE 4096
#define EXTERNAL_FLASH_SIZE (256 * 1024) // 2M-bit flash size
-
-// Wear-leveling driver configuration
-#define WEAR_LEVELING_LOGICAL_SIZE 1024
-#define WEAR_LEVELING_BACKING_SIZE (WEAR_LEVELING_LOGICAL_SIZE * 2)
M keyboards/annepro2/c15/info.json => keyboards/annepro2/c15/info.json +2 -1
@@ 6,7 6,8 @@
"eeprom": {
"driver": "wear_leveling",
"wear_leveling": {
- "driver": "spi_flash"
+ "driver": "spi_flash",
+ "backing_size": 2048
}
},
"rgb_matrix": {
M keyboards/annepro2/c18/config.h => keyboards/annepro2/c18/config.h +0 -4
@@ 55,7 55,3 @@
#define EXTERNAL_FLASH_SECTOR_SIZE 4096
#define EXTERNAL_FLASH_BLOCK_SIZE 4096
#define EXTERNAL_FLASH_SIZE (256 * 1024) // 2M-bit flash size
-
-// Wear-leveling driver configuration
-#define WEAR_LEVELING_LOGICAL_SIZE 1024
-#define WEAR_LEVELING_BACKING_SIZE (WEAR_LEVELING_LOGICAL_SIZE * 2)
M keyboards/annepro2/c18/info.json => keyboards/annepro2/c18/info.json +2 -1
@@ 6,7 6,8 @@
"eeprom": {
"driver": "wear_leveling",
"wear_leveling": {
- "driver": "spi_flash"
+ "driver": "spi_flash",
+ "backing_size": 2048
}
},
"rgb_matrix": {
M keyboards/binepad/bn006/config.h => keyboards/binepad/bn006/config.h +0 -8
@@ 4,14 4,6 @@
#pragma once
/*
- * Wear Leveling EEPROM Emulation
- */
-
-#define WEAR_LEVELING_LOGICAL_SIZE 2048 // Number of bytes "exposed" to the rest of QMK and denotes the size of the usable EEPROM.
-#define WEAR_LEVELING_BACKING_SIZE (WEAR_LEVELING_LOGICAL_SIZE * 2) // Number of bytes used by the wear-leveling algorithm for its underlying storage, and needs to be a multiple of the logical size.
-
-
-/*
* RGB Matrix
*/
M keyboards/binepad/bn006/info.json => keyboards/binepad/bn006/info.json +5 -0
@@ 24,6 24,11 @@
"pid": "0x426E",
"device_version": "1.0.0"
},
+ "eeprom": {
+ "wear_leveling": {
+ "backing_size": 4096
+ }
+ },
"ws2812": {
"pin": "B15"
},
M keyboards/binepad/bn006/rules.mk => keyboards/binepad/bn006/rules.mk +1 -5
@@ 1,5 1,1 @@
-# Copyright 2022 Binepad (@binpad)
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-EPROM_DRIVER = wear_leveling
-WEAR_LEVELING_DRIVER = embedded_flash
+# This file intentionally left blank<
\ No newline at end of file
D keyboards/binepad/bn009/r2/config.h => keyboards/binepad/bn009/r2/config.h +0 -12
@@ 1,12 0,0 @@
-// Copyright 2023 Binepad (@binepad)
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#pragma once
-
-
-/*
- * Wear Leveling EEPROM Emulation
- */
-
-#define WEAR_LEVELING_LOGICAL_SIZE 2048 // Number of bytes "exposed" to the rest of QMK and denotes the size of the usable EEPROM.
-#define WEAR_LEVELING_BACKING_SIZE (WEAR_LEVELING_LOGICAL_SIZE * 2) // Number of bytes used by the wear-leveling algorithm for its underlying storage, and needs to be a multiple of the logical size.
M keyboards/binepad/bn009/r2/info.json => keyboards/binepad/bn009/r2/info.json +5 -0
@@ 6,6 6,11 @@
"cols": ["A1", "A2", "A6"],
"rows": ["B6", "B7", "B2"]
},
+ "eeprom": {
+ "wear_leveling": {
+ "backing_size": 4096
+ }
+ },
"processor": "STM32F103",
"usb": {
"device_version": "2.0.0"
D keyboards/binepad/bnr1/v2/config.h => keyboards/binepad/bnr1/v2/config.h +0 -7
@@ 1,7 0,0 @@
-// Copyright 2022 BINEPAD (@binepad)
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#pragma once
-
-#define WEAR_LEVELING_LOGICAL_SIZE 1024
-#define WEAR_LEVELING_BACKING_SIZE (WEAR_LEVELING_LOGICAL_SIZE * 2)
M keyboards/chosfox/cf81/config.h => keyboards/chosfox/cf81/config.h +0 -1
@@ 32,7 32,6 @@
#define SPI_MOSI_PAL_MODE 5
#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN C12
-#define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
/* I2C Config for LED Driver */
#define IS31FL3733_DRIVER_COUNT 2
M keyboards/chosfox/cf81/info.json => keyboards/chosfox/cf81/info.json +2 -1
@@ 12,7 12,8 @@
"eeprom": {
"driver": "wear_leveling",
"wear_leveling": {
- "driver": "spi_flash"
+ "driver": "spi_flash",
+ "backing_size": 8192
}
},
"processor": "WB32FQ95",
M keyboards/gmmk/gmmk2/p96/ansi/info.json => keyboards/gmmk/gmmk2/p96/ansi/info.json +2 -1
@@ 22,7 22,8 @@
"eeprom": {
"driver": "wear_leveling",
"wear_leveling": {
- "driver": "spi_flash"
+ "driver": "spi_flash",
+ "backing_size": 2048
}
},
"processor": "WB32F3G71",
M keyboards/gmmk/gmmk2/p96/config.h => keyboards/gmmk/gmmk2/p96/config.h +0 -1
@@ 25,7 25,6 @@
/* External spi flash */
#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN B14
-#define WEAR_LEVELING_BACKING_SIZE 2048
/* SPI Config for LED Driver */
#define SPI_DRIVER SPIDQ
M keyboards/gmmk/gmmk2/p96/iso/info.json => keyboards/gmmk/gmmk2/p96/iso/info.json +2 -1
@@ 22,7 22,8 @@
"eeprom": {
"driver": "wear_leveling",
"wear_leveling": {
- "driver": "spi_flash"
+ "driver": "spi_flash",
+ "backing_size": 2048
}
},
"processor": "WB32F3G71",
M keyboards/gmmk/numpad/config.h => keyboards/gmmk/numpad/config.h +0 -1
@@ 37,7 37,6 @@
#define RGB_MATRIX_LED_COUNT 31
#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN B6
-#define WEAR_LEVELING_BACKING_SIZE 2048
#define ENABLE_RGB_MATRIX_ALPHAS_MODS
#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
M keyboards/gmmk/numpad/info.json => keyboards/gmmk/numpad/info.json +2 -1
@@ 11,7 11,8 @@
"eeprom": {
"driver": "wear_leveling",
"wear_leveling": {
- "driver": "spi_flash"
+ "driver": "spi_flash",
+ "backing_size": 2048
}
},
"encoder": {
M keyboards/gmmk/pro/rev2/ansi/info.json => keyboards/gmmk/pro/rev2/ansi/info.json +2 -1
@@ 19,7 19,8 @@
"eeprom": {
"driver": "wear_leveling",
"wear_leveling": {
- "driver": "spi_flash"
+ "driver": "spi_flash",
+ "backing_size": 2048
}
},
"encoder": {
M keyboards/gmmk/pro/rev2/config.h => keyboards/gmmk/pro/rev2/config.h +0 -1
@@ 19,7 19,6 @@
/* External spi flash */
#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN B12
-#define WEAR_LEVELING_BACKING_SIZE 2048
/* SPI Config for LED Driver */
#define SPI_DRIVER SPIDQ
M keyboards/gmmk/pro/rev2/iso/info.json => keyboards/gmmk/pro/rev2/iso/info.json +2 -1
@@ 19,7 19,8 @@
"eeprom": {
"driver": "wear_leveling",
"wear_leveling": {
- "driver": "spi_flash"
+ "driver": "spi_flash",
+ "backing_size": 2048
}
},
"encoder": {
M keyboards/hfdkb/ac001/config.h => keyboards/hfdkb/ac001/config.h +0 -1
@@ 32,7 32,6 @@
#define SPI_MOSI_PAL_MODE 5
#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN C12
-#define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
M keyboards/hfdkb/ac001/info.json => keyboards/hfdkb/ac001/info.json +2 -1
@@ 20,7 20,8 @@
"eeprom": {
"driver": "wear_leveling",
"wear_leveling": {
- "driver": "spi_flash"
+ "driver": "spi_flash",
+ "backing_size": 8192
}
},
"ws2812": {
M keyboards/horrortroll/handwired_k552/config.h => keyboards/horrortroll/handwired_k552/config.h +0 -4
@@ 30,10 30,6 @@
#define EXTERNAL_FLASH_BLOCK_SIZE 4096
#define EXTERNAL_FLASH_SIZE (256 * 1024) // 2M-bit flash size
-// Wear-leveling driver configuration
-#define WEAR_LEVELING_LOGICAL_SIZE 1024
-#define WEAR_LEVELING_BACKING_SIZE (WEAR_LEVELING_LOGICAL_SIZE * 2)
-
#ifdef OLED_ENABLE
/* Mapping I2C2 for OLED */
#define I2C1_SCL_PIN B10
M keyboards/horrortroll/handwired_k552/info.json => keyboards/horrortroll/handwired_k552/info.json +2 -1
@@ 23,7 23,8 @@
"eeprom": {
"driver": "wear_leveling",
"wear_leveling": {
- "driver": "spi_flash"
+ "driver": "spi_flash",
+ "backing_size": 2048
}
},
"community_layouts": ["tkl_ansi"],
M keyboards/ibm/model_m/yugo_m/config.h => keyboards/ibm/model_m/yugo_m/config.h +0 -4
@@ 36,7 36,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* redefine available (emulated) EEPROM as 4 kB rather than the default 2 kB to let VIA use more of the on-chip Flash of the STM32F303 to store 4 layers (since 4 layers * 8 rows * 16 columns * 2 = 1024 bytes but the default max available is 1023 bytes due to ATMEGA32U4 etc. only having 1 kB of EEPROM) */
-#define WEAR_LEVELING_BACKING_SIZE 4096
-#define WEAR_LEVELING_LOGICAL_SIZE 2048
M keyboards/ibm/model_m/yugo_m/info.json => keyboards/ibm/model_m/yugo_m/info.json +5 -0
@@ 13,6 13,11 @@
"rows": ["B8", "B7", "B6", "B5", "B4", "B3", "A15", "A14"]
},
"diode_direction": "ROW2COL",
+ "eeprom": {
+ "wear_leveling": {
+ "backing_size": 4096
+ }
+ },
"processor": "STM32F303",
"bootloader": "stm32-dfu",
"board": "QMK_PROTON_C",
M keyboards/inland/kb83/config.h => keyboards/inland/kb83/config.h +0 -1
@@ 36,7 36,6 @@
#define SPI_MOSI_PAL_MODE 5
#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN C12
-#define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
/* I2C Config for LED Driver */
#define IS31FL3733_DRIVER_COUNT 2
M keyboards/inland/kb83/info.json => keyboards/inland/kb83/info.json +2 -1
@@ 21,7 21,8 @@
"eeprom": {
"driver": "wear_leveling",
"wear_leveling": {
- "driver": "spi_flash"
+ "driver": "spi_flash",
+ "backing_size": 8192
}
},
"encoder": {
M keyboards/inland/mk47/config.h => keyboards/inland/mk47/config.h +0 -1
@@ 23,7 23,6 @@
#define SPI_MISO_PIN B4
#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN C12
-#define WEAR_LEVELING_BACKING_SIZE (4 * 1024)
/* I2C Config for LED Driver */
#define IS31FL3733_DRIVER_COUNT 1
M keyboards/inland/mk47/info.json => keyboards/inland/mk47/info.json +2 -1
@@ 29,7 29,8 @@
"eeprom": {
"driver": "wear_leveling",
"wear_leveling": {
- "driver": "spi_flash"
+ "driver": "spi_flash",
+ "backing_size": 4096
}
},
"rgb_matrix": {
M keyboards/mechlovin/hex6c/config.h => keyboards/mechlovin/hex6c/config.h +0 -3
@@ 18,6 18,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
#define BACKLIGHT_PWM_DRIVER PWMD3
-
-#define WEAR_LEVELING_BACKING_SIZE 4096
-#define WEAR_LEVELING_LOGICAL_SIZE 2048
M keyboards/mechlovin/hex6c/info.json => keyboards/mechlovin/hex6c/info.json +5 -0
@@ 13,6 13,11 @@
"rows": ["A10", "B13", "B12", "B11", "C14", "C15"]
},
"diode_direction": "COL2ROW",
+ "eeprom": {
+ "wear_leveling": {
+ "backing_size": 4096
+ }
+ },
"encoder": {
"rotary": [
{"pin_a": "A15", "pin_b": "A2"}
D keyboards/mode/m75h/config.h => keyboards/mode/m75h/config.h +0 -21
@@ 1,21 0,0 @@
-/*
- Copyright 2020 Álvaro "Gondolindrim" Volpato <alvaro.volpato@usp.br>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#define WEAR_LEVELING_LOGICAL_SIZE 2048
-#define WEAR_LEVELING_BACKING_SIZE 4096
M keyboards/mode/m75h/info.json => keyboards/mode/m75h/info.json +5 -0
@@ 13,6 13,11 @@
"rows": ["C5", "B0", "B14", "B15", "A8", "C9", "A15"]
},
"diode_direction": "COL2ROW",
+ "eeprom": {
+ "wear_leveling": {
+ "backing_size": 4096
+ }
+ },
"processor": "STM32F401",
"bootloader": "stm32-dfu",
"layout_aliases": {
M keyboards/mode/m75s/config.h => keyboards/mode/m75s/config.h +0 -3
@@ 20,6 20,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define BACKLIGHT_DEFAULT_LEVEL 20
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
-
-#define WEAR_LEVELING_LOGICAL_SIZE 2048
-#define WEAR_LEVELING_BACKING_SIZE 4096
M keyboards/mode/m75s/info.json => keyboards/mode/m75s/info.json +5 -0
@@ 13,6 13,11 @@
"rows": ["C5", "B0", "B14", "B15", "C7", "C9", "A15"]
},
"diode_direction": "COL2ROW",
+ "eeprom": {
+ "wear_leveling": {
+ "backing_size": 4096
+ }
+ },
"backlight": {
"pin": "C6",
"levels": 20,
M keyboards/monsgeek/m1/config.h => keyboards/monsgeek/m1/config.h +0 -1
@@ 34,7 34,6 @@
#define SPI_MOSI_PAL_MODE 5
#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN C12
-#define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
/* I2C Config for LED Driver */
#define IS31FL3733_DRIVER_COUNT 2
M keyboards/monsgeek/m1/info.json => keyboards/monsgeek/m1/info.json +2 -1
@@ 29,7 29,8 @@
"eeprom": {
"driver": "wear_leveling",
"wear_leveling": {
- "driver": "spi_flash"
+ "driver": "spi_flash",
+ "backing_size": 8192
}
},
"encoder": {
M keyboards/monsgeek/m5/config.h => keyboards/monsgeek/m5/config.h +0 -1
@@ 35,7 35,6 @@
#define SPI_MOSI_PAL_MODE 5
#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN C12
-#define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
/* I2C Config for LED Driver */
#define IS31FL3733_DRIVER_COUNT 2
M keyboards/monsgeek/m5/info.json => keyboards/monsgeek/m5/info.json +2 -1
@@ 28,7 28,8 @@
"eeprom": {
"driver": "wear_leveling",
"wear_leveling": {
- "driver": "spi_flash"
+ "driver": "spi_flash",
+ "backing_size": 8192
}
},
"indicators": {
M keyboards/monsgeek/m6/config.h => keyboards/monsgeek/m6/config.h +0 -1
@@ 32,7 32,6 @@
#define SPI_MOSI_PAL_MODE 5
#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN C12
-#define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
/* I2C Config for LED Driver */
#define IS31FL3733_DRIVER_COUNT 2
M keyboards/monsgeek/m6/info.json => keyboards/monsgeek/m6/info.json +2 -1
@@ 28,7 28,8 @@
"eeprom": {
"driver": "wear_leveling",
"wear_leveling": {
- "driver": "spi_flash"
+ "driver": "spi_flash",
+ "backing_size": 8192
}
},
"rgb_matrix": {
M keyboards/projectd/65/projectd_65_ansi/config.h => keyboards/projectd/65/projectd_65_ansi/config.h +0 -1
@@ 25,7 25,6 @@
/* External spi flash */
#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN B14
-#define WEAR_LEVELING_BACKING_SIZE (4 * 1024)
/* SPI Config for LED Driver */
#define SPI_DRIVER SPIDQ
M keyboards/projectd/65/projectd_65_ansi/info.json => keyboards/projectd/65/projectd_65_ansi/info.json +2 -1
@@ 13,7 13,8 @@
"eeprom": {
"driver": "wear_leveling",
"wear_leveling": {
- "driver": "spi_flash"
+ "driver": "spi_flash",
+ "backing_size": 4096
}
},
"features": {
M keyboards/rgbkb/mun/config.h => keyboards/rgbkb/mun/config.h +0 -3
@@ 119,6 119,3 @@
#define TOUCH_UPDATE_INTERVAL 33
#define OLED_UPDATE_INTERVAL 33
-
-#define WEAR_LEVELING_BACKING_SIZE 4096
-#define WEAR_LEVELING_LOGICAL_SIZE 2048
M keyboards/rgbkb/mun/rev1/info.json => keyboards/rgbkb/mun/rev1/info.json +5 -0
@@ 37,6 37,11 @@
"io_delay": 5
},
"diode_direction": "COL2ROW",
+ "eeprom": {
+ "wear_leveling": {
+ "backing_size": 4096
+ }
+ },
"encoder": {
"rotary": [
{"pin_a": "B8", "pin_b": "A14"},
M keyboards/rgbkb/sol3/config.h => keyboards/rgbkb/sol3/config.h +0 -3
@@ 125,6 125,3 @@
#define AUDIO_CLICKY
#define AUDIO_DAC_SAMPLE_WAVEFORM_SQUARE
#define AUDIO_DAC_OFF_VALUE 0
-
-#define WEAR_LEVELING_BACKING_SIZE 4096
-#define WEAR_LEVELING_LOGICAL_SIZE 2048
M keyboards/rgbkb/sol3/rev1/info.json => keyboards/rgbkb/sol3/rev1/info.json +5 -0
@@ 37,6 37,11 @@
"io_delay": 5
},
"diode_direction": "COL2ROW",
+ "eeprom": {
+ "wear_leveling": {
+ "backing_size": 4096
+ }
+ },
"encoder": {
"rotary": [
{"pin_a": "A1", "pin_b": "A2"},
M keyboards/xelus/kangaroo/rev2/config.h => keyboards/xelus/kangaroo/rev2/config.h +0 -3
@@ 20,6 20,3 @@
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-
-#define WEAR_LEVELING_LOGICAL_SIZE 2048
-#define WEAR_LEVELING_BACKING_SIZE WEAR_LEVELING_LOGICAL_SIZE*2
M keyboards/xelus/kangaroo/rev2/info.json => keyboards/xelus/kangaroo/rev2/info.json +5 -0
@@ 8,6 8,11 @@
"rows": ["A9", "A8", "B15", "B14", "B13", "B12", "A4", "A5", "A6", "A7", "B0", "B1"]
},
"diode_direction": "COL2ROW",
+ "eeprom": {
+ "wear_leveling": {
+ "backing_size": 4096
+ }
+ },
"processor": "STM32L412",
"bootloader": "stm32-dfu"
}
M keyboards/xelus/rs60/rev2_1/config.h => keyboards/xelus/rs60/rev2_1/config.h +0 -3
@@ 21,6 21,3 @@
// Locking resynchronize hack
#define LOCKING_RESYNC_ENABLE
-// Emulated EEPROM
-#define WEAR_LEVELING_LOGICAL_SIZE 2048
-#define WEAR_LEVELING_BACKING_SIZE WEAR_LEVELING_LOGICAL_SIZE*2
M keyboards/xelus/rs60/rev2_1/info.json => keyboards/xelus/rs60/rev2_1/info.json +5 -0
@@ 8,6 8,11 @@
"rows": ["B15", "B14", "B12", "B1", "B0"]
},
"diode_direction": "COL2ROW",
+ "eeprom": {
+ "wear_leveling": {
+ "backing_size": 4096
+ }
+ },
"indicators": {
"caps_lock": "A1",
"on_state": 0