_include:
  - "common/ac.yaml"
  - "common/port.yaml"
  - "common/spi.yaml"
  - "common/twi.yaml"
  - "common/wdt.yaml"

  - "timer/attiny88.yaml"

ADC:
  ADMUX:
    _modify:
      MUX:
        description: "Analog Channel Selection Bits"
    MUX:
      _replace_enum:
        ADC0: [0, "ADC Single Ended Input pin 0"]
        ADC1: [1, "ADC Single Ended Input pin 1"]
        ADC2: [2, "ADC Single Ended Input pin 2"]
        ADC3: [3, "ADC Single Ended Input pin 3"]
        ADC4: [4, "ADC Single Ended Input pin 4"]
        ADC5: [5, "ADC Single Ended Input pin 5"]
        ADC6: [6, "ADC Single Ended Input pin 6"]
        ADC7: [7, "ADC Single Ended Input pin 7"]
        TEMPSENS: [8, "Temperature sensor"]
        ADC_VBG: [14, "Internal Reference (VBG)"]
        ADC_GND: [15, "0V (GND)"]
    REFS0:
      _replace_enum:
        INTERNAL: [0, "Internal 1.1V Voltage Reference"]
        AVCC: [1, "AVcc Reference"]
  ADCSRA:
    ADPS:
      _replace_enum:
        PRESCALER_2: [1, "Prescaler Value 2"]
        PRESCALER_4: [2, "Prescaler Value 4"]
        PRESCALER_8: [3, "Prescaler Value 8"]
        PRESCALER_16: [4, "Prescaler Value 16"]
        PRESCALER_32: [5, "Prescaler Value 32"]
        PRESCALER_64: [6, "Prescaler Value 64"]
        PRESCALER_128: [7, "Prescaler Value 128"]
  ADCSRB:
    ADTS:
      _replace_enum:
        FREE: [0, "Free Running mode"]
        AC: [1, "Analog Comparator"]
        INT0: [2, "External Interrupt Request 0"]
        TC0_CMA: [3, "Timer/Counter0 Compare Match A"]
        TC0_OVF: [4, "Timer/Counter0 Overflow"]
        TC1_CMB: [5, "Timer/Counter1 Compare Match B"]
        TC1_OVF: [6, "Timer/Counter1 Overflow"]
        TC1_CE: [7, "Timer/Counter1 Capture Event"]
CPU:
  _modify:
    CLKPR:
      access: read-write
    OSCCAL:
      access: read-write
    PORTCR:
      access: read-write
    PRR:
      access: read-write
  CLKPR:
    CLKPS:
      _replace_enum:
        PRESCALER_1: [0, "Prescaler Value 1"]
        PRESCALER_2: [1, "Prescaler Value 2"]
        PRESCALER_4: [2, "Prescaler Value 4"]
        PRESCALER_8: [3, "Prescaler Value 8"]
        PRESCALER_16: [4, "Prescaler Value 16"]
        PRESCALER_32: [5, "Prescaler Value 32"]
        PRESCALER_64: [6, "Prescaler Value 64"]
        PRESCALER_128: [7, "Prescaler Value 128"]
        PRESCALER_256: [8, "Prescaler Value 256"]
  SMCR:
    SM:
      _replace_enum:
        IDLE: [0, "Idle"]
        ADC: [1, "ADC Noise Reduction"]
        PDOWN: [2, "Power-down"]
EEPROM:
  EECR:
    EEPM:
      _replace_enum:
        ATOMIC: [0, "Atomic (erase and write in one operation)"]
        ERASE: [1, "Erase only"]
        WRITE: [2, "Write only"]
EXINT:
  EICRA:
    ISC?:
      _replace_enum:
        LOW: [0, "The low level of INTx generates an interrupt request"]
        TOGGLE: [1, "Any logical change on INTx generates an interrupt request"]
        FALLING: [2, "The falling edge of INTx generates an interrupt request"]
        RISING: [3, "The rising edge of INTx generates an interrupt request"]
  _modify:
    PCICR:
      description: "Pin Change Interrupt Control Register"
PORTA:
  _modify:
    PORTA:
      access: read-write
    DDRA:
      access: read-write